asterisk users - Oct 2018 - SIPp scenario file for testing UAC Authentication with Asterisk ?

Hello,

I'm testing an Asterisk instance.
At the moment, I'm focusing on its capability to receive and challenge
incoming SIP Registrations.

For various reasons, I would prefer to use SIPp instead of Asterisk to act
as SIP Client.

Has someone successfully done this ?
If negative, what explains this ?
If positive, can you give an example of a successful SIPp scenario file ?
I've played with both embeded branchc and [1] but met no success yet

Best regards

[1] https://github.com/rkday/sipp-samples/blob/master/uac-auth.xml
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20181025/b6bcf7b6/attachment.html>

On Thu, Oct 25, 2018 at 4:32 AM Olivier <oza.4h07 at gmail.com> wrote:
> Hello,
>
> I'm testing an Asterisk instance.
> At the moment, I'm focusing on its capability to receive and challenge
> incoming SIP Registrations.
>
>
If all you want to do is test inbound registrations you can find an example
SIPp scenario in the Asterisk testsuite[1]. You'll want to remove the
<action> section from the 200 response and the variable reference. Then
you'll want to execute the scenario with something like the following
(replacing with your values of course):

sipp <remote host> -m 1 -sf register-auth.xml -s <endpoint> -ap
<password>

Another example can be found here[2]. Both the README and register.xml file
have instructions on how to execute the test. Currently the test is setup
to test a few thousand endpoints though. However you can adjust that number
by modifying the register.csv (injection file) or by not using the
injection file and modifying the register.xml scenario itself.

[1]
https://github.com/asterisk/testsuite/blob/master/tests/channels/pjsip/registration/inbound/nominal/single_contact/authed/sipp/register-auth.xml
[2]
http://blogs.asterisk.org/wp-content/uploads/2018/09/performance_inbound_registration.tar.gz


> For various reasons, I would prefer to use SIPp instead of Asterisk to act
> as SIP Client.
>
> Has someone successfully done this ?
> If negative, what explains this ?
> If positive, can you give an example of a successful SIPp scenario file ?
> I've played with both embeded branchc and [1] but met no success yet
>
> Best regards
>
> [1] https://github.com/rkday/sipp-samples/blob/master/uac-auth.xml
>
>
-- 
Kevin Harwell
Digium - A Sangoma Company | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: https://digium.com & https://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20181025/515a1152/attachment.html>