On 08/09/2018 at 10:49 PM Michael Maier wrote:> Hello!
>
> I'm using TOS as shown below with pjsip 13.22.0-rc1 (same with
13.21.1).
> Unfortunately, the TOS isn't set in reality any more (it used to work
> some time ago).
Got the problem.
I'm using freepbx and for the configuration of TOS, I'm using the
individual config file pjsip.endpoint_custom_post.conf.
After disabling one of my trunks via GUI, this trunk couldn't be find
any more by asterisk in pjsip.endpoint_custom_post.conf and the complete
configuration provided there was ignored. I had to comment out the
deactivated trunk. Now it's working again.
But I'm wondering why I have to define TOS for each trunk individually
if it is already defined for the transport as defined below?
Thanks,
Michael
>
>
> Transport: <TransportId........> <Type> <cos>
<tos>
> <BindAddress....................>
>
=========================================================================================>
>
> Transport: 0.0.0.0-udp udp 0 184 0.0.0.0:5061
>
> ParameterName : ParameterValue
> =====================================================>
allow_reload : true
> async_operations : 1
> bind : 0.0.0.0:5061
> ca_list_file :
> ca_list_path :
> cert_file :
> cipher :
> cos : 0
> domain :
> external_media_address :
> external_signaling_address :
> external_signaling_port : 0
> local_net : 192.168.13.0/255.255.255.0
> local_net : 192.168.17.0/255.255.255.0
> method : unspecified
> password :
> priv_key_file :
> protocol : udp
> require_client_cert : No
> symmetric_transport : false
> tos : 184
> verify_client : No
> verify_server : No
> websocket_write_timeout : 100
>