thr3ads.net - asterisk users - [asterisk-users] How to execute priorities following a caller hangup in a successful Dial? [Jun 2018]

If this information is useful, please help other people find it:
Share via:

David P

2018-Jun-05 09:33 UTC

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?

Thanks, Anthony.

I added both 'g' and 'F' options. Now, when the caller hangs-up,
my cleanup
code is run by both the caller channel and the peer channel, but I only
want the caller channel to do that.

Also, when the peer hangs-up, there is no execution of the priorities
following the Dial.

Finally, is there a way to reset all globals, maybe as a variant of
"dialplan reload"?

On Tue, Jun 5, 2018 at 1:21 AM, Antony Stone <
Antony.Stone at asterisk.open.source.it> wrote:
> On Tuesday 05 June 2018 at 08:33:26, David P wrote:
>
> > We're using Asterisk 14.7.6 and I have a dialplan that ends like
this:
> >
> >  same => n,Dial(SIP/${EXTEN:0:4}@peer1)
> >  same => n,Set(GLOBAL(EpochAtCallEnd)=${EPOCH})
> >  same => n,Hangup()
> >
> > When peer1 hangsup, the priorities after the Dial are executed fine.
But
> > when the caller hangsup during the Dial, the cleanup steps aren't
done.
> > Why?
> >
> > I did read "Note that on a successful connection, in the absence
of the g
> > and G modifiers (below), the Dial command does not return to allow
> > execution of further commands for that extension in that
context." at
> > https://www.voip-info.org/asterisk-cmd-dial/ But it seems not to apply
> > because I'm seeing the 'g' behavior without specifying
that option, and
> the
> > 'G' option seems intended for a far more complicated scenario.
>
> If you're getting "g" functionality without specifying it,
congratulations.
>
> If you want something similar when the callER hangs up, you want to use
> the F
> option.
>
> Regards,
>
>
> Antony.-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20180605/327d3900/attachment.html>

Eric Wieling

2018-Jun-05 14:38 UTC

head link

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?

Use hangup handlers, they work around the issues with the 'h' extension.

On 06/05/2018 05:33 AM, David P wrote:> Thanks, Anthony.
> 
> I added both 'g' and 'F' options. Now, when the caller
hangs-up, my
> cleanup code is run by both the caller channel and the peer channel, but 
> I only want the caller channel to do that.
> 
> Also, when the peer hangs-up, there is no execution of the priorities 
> following the Dial.
> 
> Finally, is there a way to reset all globals, maybe as a variant of 
> "dialplan reload"?
> 
> On Tue, Jun 5, 2018 at 1:21 AM, Antony Stone 
> <Antony.Stone at asterisk.open.source.it 
> <mailto:Antony.Stone at asterisk.open.source.it>> wrote:
> 
>     On Tuesday 05 June 2018 at 08:33:26, David P wrote:
> 
>     > We're using Asterisk 14.7.6 and I have a dialplan that ends
like this:
>     > 
>     >  same => n,Dial(SIP/${EXTEN:0:4}@peer1)
>     >  same => n,Set(GLOBAL(EpochAtCallEnd)=${EPOCH})
>     >  same => n,Hangup()
>     > 
>     > When peer1 hangsup, the priorities after the Dial are executed
fine. But
>     > when the caller hangsup during the Dial, the cleanup steps
aren't done.
>     > Why?
>     > 
>     > I did read "Note that on a successful connection, in the
absence of the g
>     > and G modifiers (below), the Dial command does not return to allow
>     > execution of further commands for that extension in that
context." at
>     > https://www.voip-info.org/asterisk-cmd-dial/
>     <https://www.voip-info.org/asterisk-cmd-dial/> But it seems not
to apply
>     > because I'm seeing the 'g' behavior without specifying
that option, and the
>     > 'G' option seems intended for a far more complicated
scenario.
> 
>     If you're getting "g" functionality without specifying
it,
>     congratulations.
> 
>     If you want something similar when the callER hangs up, you want to
>     use the F
>     option.
> 
>     Regards,
> 
> 
>     Antony.
> 
> 
> 
-- 
http://help.nyigc.net/

David P

2018-Jun-05 19:37 UTC

head link

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?

Thanks, Eric. I just tried a hangup handler, but it's showing a similar
problem: When the peer hangs-up, the hangup handler is not invoked and the
caller channel remains open.

 same =>
n(callPeer),Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${PeerCurrentCallsCount}
+ 1])
 same =>
n,Set(CHANNEL(hangup_handler_push)=handleHangupByCallerOrPeer,doesntMatter,1(args))
 same => n,Set(DialForPeer=SIP/${EXTEN:0:4}@${PeerBeingConsidered})
 same => n,Dial(${DialForPeer})
 same => n,Hangup()

[handleHangupByCallerOrPeer]
exten => _.,1,NoOp(${PeerBeingConsidered}: Entered
handleHangupByCallerOrPeer Calls ${Peer${IndexIntoPeers}CurrentCallsCount})
 same =>
n,Set(GLOBAL(Peer${IndexIntoPeers}CurrentCallsCount)=$[${Peer${IndexIntoPeers}CurrentCallsCount}
- 1])
 same => n,Set(GLOBAL(${PeerBeingConsidered}EpochAtCallEnd)=${EPOCH})
 same => n,Return()

I've also tried replacing the Dial above with:

 same => n,Dial(${DialForPeer},,g)

Cheers,
David

On Tue, Jun 5, 2018 at 7:38 AM, Eric Wieling <ewieling at nyigc.com>
wrote:
> Use hangup handlers, they work around the issues with the 'h'
extension.
>
> On 06/05/2018 05:33 AM, David P wrote:
>
>> Thanks, Anthony.
>>
>> I added both 'g' and 'F' options. Now, when the caller
hangs-up, my
>> cleanup code is run by both the caller channel and the peer channel,
but I
>> only want the caller channel to do that.
>>
>> Also, when the peer hangs-up, there is no execution of the priorities
>> following the Dial.
>>
>> Finally, is there a way to reset all globals, maybe as a variant of
>> "dialplan reload"?
>>
>> On Tue, Jun 5, 2018 at 1:21 AM, Antony Stone <
>> Antony.Stone at asterisk.open.source.it <mailto:Antony.Stone at
asterisk.
>> open.source.it>> wrote:
>>
>>     On Tuesday 05 June 2018 at 08:33:26, David P wrote:
>>
>>     > We're using Asterisk 14.7.6 and I have a dialplan that
ends like
>> this:
>>     >     >  same => n,Dial(SIP/${EXTEN:0:4}@peer1)
>>     >  same => n,Set(GLOBAL(EpochAtCallEnd)=${EPOCH})
>>     >  same => n,Hangup()
>>     >     > When peer1 hangsup, the priorities after the Dial are
>> executed fine. But
>>     > when the caller hangsup during the Dial, the cleanup steps
aren't
>> done.
>>     > Why?
>>     >     > I did read "Note that on a successful
connection, in the
>> absence of the g
>>     > and G modifiers (below), the Dial command does not return to
allow
>>     > execution of further commands for that extension in that
context."
>> at
>>     > https://www.voip-info.org/asterisk-cmd-dial/
>>     <https://www.voip-info.org/asterisk-cmd-dial/> But it seems
not to
>> apply
>>     > because I'm seeing the 'g' behavior without
specifying that option,
>> and the
>>     > 'G' option seems intended for a far more complicated
scenario.
>>
>>     If you're getting "g" functionality without
specifying it,
>>     congratulations.
>>
>>     If you want something similar when the callER hangs up, you want to
>>     use the F
>>     option.
>>
>>     Regards,
>>
>>
>>     Antony.
>>
>>
>>
>>
> --
> http://help.nyigc.net/
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20180605/8e12b099/attachment.html>

asterisk users - Jun 2018 - How to execute priorities following a caller hangup in a successful Dial?

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?

[asterisk-users] How to execute priorities following a caller hangup in a successful Dial?