Has anyone used Telynx as a SIP trunk provider?? It works with chan_sip but it I seem to be having problems trying to set up a PJSIP trunk.? I always get a 401 Unauthorized when they send me a call.? I know my username and password are correct since I can register and PJSIP uses the same information for inbound as for the registration.? Unfortunately their support department said "PJSIP what?".? It seems mos SIP providers know Asterisk but are not aware of the important change coming.? I already got a nasty surprise from Voicepulse stating that they do not support PJSIP so their service will not work with newer installations. -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez dCAP #1349 +52-(55)8116-9161
On Fri, Oct 20, 2017, at 10:17 PM, Carlos Chavez wrote:> Has anyone used Telynx as a SIP trunk provider?? It works with chan_sip > but it I seem to be having problems trying to set up a PJSIP trunk.? I > always get a 401 Unauthorized when they send me a call.? I know my > username and password are correct since I can register and PJSIP uses > the same information for inbound as for the registration.? Unfortunately > their support department said "PJSIP what?".? It seems mos SIP providers > know Asterisk but are not aware of the important change coming.? I > already got a nasty surprise from Voicepulse stating that they do not > support PJSIP so their service will not work with newer installations.Generally ITSPs don't authenticate to you, they expect the device or software to just know the call is from them and to accept it. In PJSIP this is done by using an identify section and matching based on IP address. There's also the line option[1] to outbound registration which works with some equipment, if it works then no identify section is required. [1] http://blogs.asterisk.org/2016/01/27/the-pjsip-outbound-registration-line-option/ -- Joshua Colp Digium, Inc. | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org
On 10/20/2017 8:46 PM, Joshua Colp wrote:> On Fri, Oct 20, 2017, at 10:17 PM, Carlos Chavez wrote: >> Has anyone used Telynx as a SIP trunk provider?? It works with chan_sip >> but it I seem to be having problems trying to set up a PJSIP trunk.? I >> always get a 401 Unauthorized when they send me a call.? I know my >> username and password are correct since I can register and PJSIP uses >> the same information for inbound as for the registration.? Unfortunately >> their support department said "PJSIP what?".? It seems mos SIP providers >> know Asterisk but are not aware of the important change coming.? I >> already got a nasty surprise from Voicepulse stating that they do not >> support PJSIP so their service will not work with newer installations. > Generally ITSPs don't authenticate to you, they expect the device or > software to just know the call is from them and to accept it. In PJSIP > this is done by using an identify section and matching based on IP > address. There's also the line option[1] to outbound registration which > works with some equipment, if it works then no identify section is > required. >??? Thank you.? I forgot that little detail.? I just changed my identify section to use an endpoint that does not have an auth section and only uses the IP in the AOR section.? It is working now.> -- > Telecomunicaciones Abiertas de M?xico S.A. de C.V. > Carlos Ch?vez > dCAP #1349 > +52-(55)8116-9161