asterisk users - Sep 2017 - Now to set contact username and from username idependently

Hello

Finally I figured out, how our SBC does matches invites to
registrations with the Contact header.

But now I run into a Problem:

How do I set the contact header of an invite different to the From
header?


INVITE sip:called-id at URI SIP/2.0
Via: SIP/2.0/UDP IP:5060;branch=z9hG4bK495c70cc
Max-Forwards: 70
From: "SBC TEST" <sip:callerID at IP>;tag=as2c330ac5
To: <sip:called_id at URI>
Contact: <sip:user-from-reg at IP:5060>

in my 

[sip-provider]
type=peer
;fromuser=user-from-reg
;username=user-from-reg
secret=hidden
host=URI
outboundproxy=IP of Proxy

As soon as I set either fromuser or username, this also overwrites the
callerID and then of course the CallerID which should be sent over the
trunk is not correct anymore.

And of course because the CallerID can be different for each call (it's
a trunk) I cannot set it with CallerID= in the peer definition.

Am I missing something?

-Beno?t Panizzon-
-- 
I m p r o W a r e   A G    -    Leiter Commerce Kunden
______________________________________________________

Zurlindenstrasse 29             Tel  +41 61 826 93 00
CH-4133 Pratteln                Fax  +41 61 826 93 01
Schweiz                         Web  http://www.imp.ch
______________________________________________________

Hello,

Maybe you can try "defaultuser". I'm not sure it will be used in
the
"Contact" header, but it will be the one used for authentication.

Regards

Jean Aunis


Le 08/09/2017 ? 15:38, Benoit Panizzon a ?crit :
> Hello
>
> Finally I figured out, how our SBC does matches invites to
> registrations with the Contact header.
>
> But now I run into a Problem:
>
> How do I set the contact header of an invite different to the From
> header?
>
>
> INVITE sip:called-id at URI SIP/2.0
> Via: SIP/2.0/UDP IP:5060;branch=z9hG4bK495c70cc
> Max-Forwards: 70
> From: "SBC TEST" <sip:callerID at IP>;tag=as2c330ac5
> To: <sip:called_id at URI>
> Contact: <sip:user-from-reg at IP:5060>
>
> in my
>
> [sip-provider]
> type=peer
> ;fromuser=user-from-reg
> ;username=user-from-reg
> secret=hidden
> host=URI
> outboundproxy=IP of Proxy
>
> As soon as I set either fromuser or username, this also overwrites the
> callerID and then of course the CallerID which should be sent over the
> trunk is not correct anymore.
>
> And of course because the CallerID can be different for each call (it's
> a trunk) I cannot set it with CallerID= in the peer definition.
>
> Am I missing something?
>
> -Beno?t Panizzon-