Before walking down this path, take a moment to think critically: How far
away is the AoR from the attendant station? Does there need to be local
rescue/fire service access to the communications? How reliable does the
link need to be? Will power always be available when the AoR pone is
required to function?
I did a 27mA powered intercom system at a chemical plant a bit over decade
ago, the old analog circuits are dead simple - just a battery (or a double
battery-backed power supply in my case), a current regulator and an audio
bypass cap to make a simple audio loop.
If that's too much hardware, there are still sound-powered phones produced
- very common in mining and maritime. An SIP phone can be wired into a
sound powered phone circuit, where the preferred usage would be talking via
SIP phone, but if all powered failed the sound-powered devices on the line
would still make a complete audio circuit.
Just a thought...
-Tim
On Wed, Nov 2, 2016 at 1:30 PM, Sylvain Rochet <gradator at gradator.net>
wrote:
> Hi,
>
> On Wed, Nov 02, 2016 at 04:21:07PM -0400, Eric Wieling wrote:
> > If cable can be pulled , you have a couple of options.
> >
> > Long Reach Ethernet from Cisco is rated for 5,000 feet. Multi-mode
fiber
> > with fiber/ethernet media converters on each end would work and
> electrically
> > isolate the two ends of the cable. Both are way overkill from a
capacity
> > standpoint, but sometimes there's nothing wrong with overkill. Put
an
> ATA on
> > the far side.
>
> We are using Westermo products for this case. Westermo DDW-120 is rated
> up to 15 km (@ 192 kbit/s), higher speed is indeed achieved for shorter
> lengths.
>
> It's not cheap, but it works well, even in harsh industrial
> environments.
>
> Sylvain
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Check out the new Asterisk community forum at: https://community.asterisk.
> org/
>
> New to Asterisk? Start here:
> https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20161102/3afc15cd/attachment.html>