Telium Technical Support
2016-Aug-29 15:17 UTC
[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Oh! In that case ignore it. Asterisk won't rebind the adapter if you've only changed parameters. The message is misleading -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco Sent: Monday, August 29, 2016 10:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload Sorry, I just see warning. 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>:> I just see warning? > > > 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>: >> This shows that asterisk's IAX is already bound to all adapters - so >> that's >> good. Symptomatically does your IAX stop working? Or do you just see a >> warning? >> >> -----Original Message----- >> From: asterisk-users-bounces at lists.digium.com >> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >> Mazuco >> Sent: Monday, August 29, 2016 8:46 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >> bindport/bindaddr >> on reload >> >> Hi, see the log below >> >> root at AsteriskSlave:~# ip addr >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >> group default >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >> inet 127.0.0.1/8 scope host lo >> valid_lft forever preferred_lft forever >> inet6 ::1/128 scope host >> valid_lft forever preferred_lft forever >> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >> default qlen 1000 >> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff >> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >> state UP group default qlen 1000 >> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff >> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 >> valid_lft forever preferred_lft forever >> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic >> valid_lft 86398sec preferred_lft 43198sec >> inet6 fe80::2e0:4cff:fe44:195/64 scope link >> valid_lft forever preferred_lft forever >> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >> default qlen 1000 >> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff >> >> and >> >> root at AsteriskSlave:~# netstat -anp | grep ast >> tcp 0 0 0.0.0.0:2000 0.0.0.0:* >> OU?A 2050/asterisk >> tcp 0 0 0.0.0.0:5338 0.0.0.0:* >> OU?A 2050/asterisk >> udp 0 0 0.0.0.0:38180 0.0.0.0:* >> 2050/asterisk >> udp 0 0 0.0.0.0:4520 0.0.0.0:* >> 2050/asterisk >> udp 0 0 0.0.0.0:4659 0.0.0.0:* >> 2050/asterisk >> udp 0 0 0.0.0.0:2727 0.0.0.0:* >> 2050/asterisk >> udp 0 0 0.0.0.0:5000 0.0.0.0:* >> 2050/asterisk >> udp 0 0 0.0.0.0:5089 0.0.0.0:* >> 2050/asterisk >> unix 2 [ ACC ] STREAM OUVINDO 484 >> 2050/asterisk /var/run/asterisk/asterisk.ctl >> unix 2 [ ] DGRAM 11686 2050/asterisk >> >> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>: >>> Could you post the result of "ip addr" command, and "netstat -anp | grep >>> ast" after the reload? >>> >>> I suspect something else is going on here... >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Vitor Mazuco
2016-Aug-29 15:37 UTC
[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Hummm, but why It is with that problem? I use UCARP, maybe is this the problem? 2016-08-29 12:17 GMT-03:00, Telium Technical Support <support at telium.ca>:> Oh! In that case ignore it. > > Asterisk won't rebind the adapter if you've only changed parameters. The > message is misleading > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Monday, August 29, 2016 10:41 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr > on reload > > Sorry, > > I just see warning. > > > > 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>: >> I just see warning? >> >> >> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>: >>> This shows that asterisk's IAX is already bound to all adapters - so >>> that's >>> good. Symptomatically does your IAX stop working? Or do you just see a >>> warning? >>> >>> -----Original Message----- >>> From: asterisk-users-bounces at lists.digium.com >>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >>> Mazuco >>> Sent: Monday, August 29, 2016 8:46 AM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >>> bindport/bindaddr >>> on reload >>> >>> Hi, see the log below >>> >>> root at AsteriskSlave:~# ip addr >>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>> group default >>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>> inet 127.0.0.1/8 scope host lo >>> valid_lft forever preferred_lft forever >>> inet6 ::1/128 scope host >>> valid_lft forever preferred_lft forever >>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff >>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>> state UP group default qlen 1000 >>> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff >>> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 >>> valid_lft forever preferred_lft forever >>> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic >>> valid_lft 86398sec preferred_lft 43198sec >>> inet6 fe80::2e0:4cff:fe44:195/64 scope link >>> valid_lft forever preferred_lft forever >>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff >>> >>> and >>> >>> root at AsteriskSlave:~# netstat -anp | grep ast >>> tcp 0 0 0.0.0.0:2000 0.0.0.0:* >>> OU?A 2050/asterisk >>> tcp 0 0 0.0.0.0:5338 0.0.0.0:* >>> OU?A 2050/asterisk >>> udp 0 0 0.0.0.0:38180 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4520 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4659 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:2727 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5000 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5089 0.0.0.0:* >>> 2050/asterisk >>> unix 2 [ ACC ] STREAM OUVINDO 484 >>> 2050/asterisk /var/run/asterisk/asterisk.ctl >>> unix 2 [ ] DGRAM 11686 2050/asterisk >>> >>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>: >>>> Could you post the result of "ip addr" command, and "netstat -anp | grep >>>> ast" after the reload? >>>> >>>> I suspect something else is going on here... >>>> >>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>>> http://www.asterisk.org/community/astricon-user-conference >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Telium Technical Support
2016-Aug-29 17:18 UTC
[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Possibly - I noticed this thread only in the context of an IAX problem. I can't speak to UCARP If you're trying to my a high availability cluster out of Asterisk servers have a look at http://serverfault.com/questions/733403/high-availability-asterisk-options/733441#733441 -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco Sent: Monday, August 29, 2016 11:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload Hummm, but why It is with that problem? I use UCARP, maybe is this the problem? 2016-08-29 12:17 GMT-03:00, Telium Technical Support <support at telium.ca>:> Oh! In that case ignore it. > > Asterisk won't rebind the adapter if you've only changed parameters. The > message is misleading > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Monday, August 29, 2016 10:41 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr > on reload > > Sorry, > > I just see warning. > > > > 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>: >> I just see warning? >> >> >> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>: >>> This shows that asterisk's IAX is already bound to all adapters - so >>> that's >>> good. Symptomatically does your IAX stop working? Or do you just see a >>> warning? >>> >>> -----Original Message----- >>> From: asterisk-users-bounces at lists.digium.com >>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >>> Mazuco >>> Sent: Monday, August 29, 2016 8:46 AM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >>> bindport/bindaddr >>> on reload >>> >>> Hi, see the log below >>> >>> root at AsteriskSlave:~# ip addr >>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>> group default >>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>> inet 127.0.0.1/8 scope host lo >>> valid_lft forever preferred_lft forever >>> inet6 ::1/128 scope host >>> valid_lft forever preferred_lft forever >>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff >>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>> state UP group default qlen 1000 >>> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff >>> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 >>> valid_lft forever preferred_lft forever >>> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic >>> valid_lft 86398sec preferred_lft 43198sec >>> inet6 fe80::2e0:4cff:fe44:195/64 scope link >>> valid_lft forever preferred_lft forever >>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff >>> >>> and >>> >>> root at AsteriskSlave:~# netstat -anp | grep ast >>> tcp 0 0 0.0.0.0:2000 0.0.0.0:* >>> OU?A 2050/asterisk >>> tcp 0 0 0.0.0.0:5338 0.0.0.0:* >>> OU?A 2050/asterisk >>> udp 0 0 0.0.0.0:38180 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4520 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4659 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:2727 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5000 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5089 0.0.0.0:* >>> 2050/asterisk >>> unix 2 [ ACC ] STREAM OUVINDO 484 >>> 2050/asterisk /var/run/asterisk/asterisk.ctl >>> unix 2 [ ] DGRAM 11686 2050/asterisk >>> >>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca>: >>>> Could you post the result of "ip addr" command, and "netstat -anp | grep >>>> ast" after the reload? >>>> >>>> I suspect something else is going on here... >>>> >>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>>> http://www.asterisk.org/community/astricon-user-conference >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Vitor Mazuco
2016-Aug-30 00:44 UTC
[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Humm right I think the UCARP can be the problem It is the problem about sip and rtp ports I will remove it and make the tests Thanks man Em 29/08/2016 14:19, "Telium Technical Support" <support at telium.ca> escreveu: Possibly - I noticed this thread only in the context of an IAX problem. I can't speak to UCARP If you're trying to my a high availability cluster out of Asterisk servers have a look at http://serverfault.com/questions/733403/high- availability-asterisk-options/733441#733441 -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- bounces at lists.digium.com] On Behalf Of Vitor Mazuco Sent: Monday, August 29, 2016 11:38 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload Hummm, but why It is with that problem? I use UCARP, maybe is this the problem? 2016-08-29 12:17 GMT-03:00, Telium Technical Support <support at telium.ca>:> Oh! In that case ignore it. > > Asterisk won't rebind the adapter if you've only changed parameters. The > message is misleading > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Monday, August 29, 2016 10:41 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr > on reload > > Sorry, > > I just see warning. > > > > 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>: >> I just see warning? >> >> >> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>: >>> This shows that asterisk's IAX is already bound to all adapters - so >>> that's >>> good. Symptomatically does your IAX stop working? Or do you just see a >>> warning? >>> >>> -----Original Message----- >>> From: asterisk-users-bounces at lists.digium.com >>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >>> Mazuco >>> Sent: Monday, August 29, 2016 8:46 AM >>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >>> bindport/bindaddr >>> on reload >>> >>> Hi, see the log below >>> >>> root at AsteriskSlave:~# ip addr >>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>> group default >>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>> inet 127.0.0.1/8 scope host lo >>> valid_lft forever preferred_lft forever >>> inet6 ::1/128 scope host >>> valid_lft forever preferred_lft forever >>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff >>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>> state UP group default qlen 1000 >>> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff >>> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 >>> valid_lft forever preferred_lft forever >>> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic >>> valid_lft 86398sec preferred_lft 43198sec >>> inet6 fe80::2e0:4cff:fe44:195/64 scope link >>> valid_lft forever preferred_lft forever >>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>> default qlen 1000 >>> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff >>> >>> and >>> >>> root at AsteriskSlave:~# netstat -anp | grep ast >>> tcp 0 0 0.0.0.0:2000 0.0.0.0:* >>> OU?A 2050/asterisk >>> tcp 0 0 0.0.0.0:5338 0.0.0.0:* >>> OU?A 2050/asterisk >>> udp 0 0 0.0.0.0:38180 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4520 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:4659 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:2727 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5000 0.0.0.0:* >>> 2050/asterisk >>> udp 0 0 0.0.0.0:5089 0.0.0.0:* >>> 2050/asterisk >>> unix 2 [ ACC ] STREAM OUVINDO 484 >>> 2050/asterisk /var/run/asterisk/asterisk.ctl >>> unix 2 [ ] DGRAM 11686 2050/asterisk >>> >>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca >: >>>> Could you post the result of "ip addr" command, and "netstat -anp |grep>>>> ast" after the reload? >>>> >>>> I suspect something else is going on here... >>>> >>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>>> http://www.asterisk.org/community/astricon-user-conference >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160829/cbd2dce6/attachment.html>
Vitor Mazuco
2016-Aug-30 16:38 UTC
[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload
Yes, UCARP is the problem about the sip ports It conflict with ports IAX, SIP, RTP, etc. Thanks man. 2016-08-29 21:44 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>:> Humm right > > I think the UCARP can be the problem > > It is the problem about sip and rtp ports > > I will remove it and make the tests > > Thanks man > > Em 29/08/2016 14:19, "Telium Technical Support" <support at telium.ca> > escreveu: > > Possibly - I noticed this thread only in the context of an IAX problem. I > can't speak to UCARP > > If you're trying to my a high availability cluster out of Asterisk servers > have a look at http://serverfault.com/questions/733403/high- > availability-asterisk-options/733441#733441 > > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of Vitor Mazuco > Sent: Monday, August 29, 2016 11:38 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr > on reload > > Hummm, but why It is with that problem? > > I use UCARP, maybe is this the problem? > > > 2016-08-29 12:17 GMT-03:00, Telium Technical Support <support at telium.ca>: >> Oh! In that case ignore it. >> >> Asterisk won't rebind the adapter if you've only changed parameters. The >> message is misleading >> >> -----Original Message----- >> From: asterisk-users-bounces at lists.digium.com >> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >> Mazuco >> Sent: Monday, August 29, 2016 10:41 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >> bindport/bindaddr >> on reload >> >> Sorry, >> >> I just see warning. >> >> >> >> 2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at gmail.com>: >>> I just see warning? >>> >>> >>> 2016-08-29 11:30 GMT-03:00, Telium Technical Support >>> <support at telium.ca>: >>>> This shows that asterisk's IAX is already bound to all adapters - so >>>> that's >>>> good. Symptomatically does your IAX stop working? Or do you just see >>>> a >>>> warning? >>>> >>>> -----Original Message----- >>>> From: asterisk-users-bounces at lists.digium.com >>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor >>>> Mazuco >>>> Sent: Monday, August 29, 2016 8:46 AM >>>> To: Asterisk Users Mailing List - Non-Commercial Discussion >>>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring >>>> bindport/bindaddr >>>> on reload >>>> >>>> Hi, see the log below >>>> >>>> root at AsteriskSlave:~# ip addr >>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN >>>> group default >>>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 >>>> inet 127.0.0.1/8 scope host lo >>>> valid_lft forever preferred_lft forever >>>> inet6 ::1/128 scope host >>>> valid_lft forever preferred_lft forever >>>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>>> default qlen 1000 >>>> link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff >>>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast >>>> state UP group default qlen 1000 >>>> link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff >>>> inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1 >>>> valid_lft forever preferred_lft forever >>>> inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic >>>> valid_lft 86398sec preferred_lft 43198sec >>>> inet6 fe80::2e0:4cff:fe44:195/64 scope link >>>> valid_lft forever preferred_lft forever >>>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group >>>> default qlen 1000 >>>> link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff >>>> >>>> and >>>> >>>> root at AsteriskSlave:~# netstat -anp | grep ast >>>> tcp 0 0 0.0.0.0:2000 0.0.0.0:* >>>> OU?A 2050/asterisk >>>> tcp 0 0 0.0.0.0:5338 0.0.0.0:* >>>> OU?A 2050/asterisk >>>> udp 0 0 0.0.0.0:38180 0.0.0.0:* >>>> 2050/asterisk >>>> udp 0 0 0.0.0.0:4520 0.0.0.0:* >>>> 2050/asterisk >>>> udp 0 0 0.0.0.0:4659 0.0.0.0:* >>>> 2050/asterisk >>>> udp 0 0 0.0.0.0:2727 0.0.0.0:* >>>> 2050/asterisk >>>> udp 0 0 0.0.0.0:5000 0.0.0.0:* >>>> 2050/asterisk >>>> udp 0 0 0.0.0.0:5089 0.0.0.0:* >>>> 2050/asterisk >>>> unix 2 [ ACC ] STREAM OUVINDO 484 >>>> 2050/asterisk /var/run/asterisk/asterisk.ctl >>>> unix 2 [ ] DGRAM 11686 >>>> 2050/asterisk >>>> >>>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at telium.ca >>: >>>>> Could you post the result of "ip addr" command, and "netstat -anp | > grep >>>>> ast" after the reload? >>>>> >>>>> I suspect something else is going on here... >>>>> >>>>> >>>>> >>>>> -- >>>>> _____________________________________________________________________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> >>>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, >>>>> 2016 >>>>> http://www.asterisk.org/community/astricon-user-conference >>>>> >>>>> New to Asterisk? Start here: >>>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>>> >>>>> asterisk-users mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>>> http://www.asterisk.org/community/astricon-user-conference >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>>> http://www.asterisk.org/community/astricon-user-conference >>>> >>>> New to Asterisk? Start here: >>>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >