thr3ads.net - asterisk users - [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload [Aug 2016]

If this information is useful, please help other people find it:
Share via:

Vitor Mazuco

2016-Aug-29 14:40 UTC

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

I just see  warning?


2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at
telium.ca>:> This shows that asterisk's IAX is already bound to all adapters - so
that's
> good.  Symptomatically does your IAX stop working?  Or do you just see a
> warning?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
Mazuco
> Sent: Monday, August 29, 2016 8:46 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr
> on reload
>
> Hi, see the log below
>
> root at AsteriskSlave:~# ip addr
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> group default
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>        valid_lft forever preferred_lft forever
>     inet6 ::1/128 scope host
>        valid_lft forever preferred_lft forever
> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP group default qlen 1000
>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>        valid_lft forever preferred_lft forever
>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>        valid_lft 86398sec preferred_lft 43198sec
>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>        valid_lft forever preferred_lft forever
> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>
> and
>
> root at AsteriskSlave:~# netstat -anp | grep ast
> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
> OU?A       2050/asterisk
> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
> OU?A       2050/asterisk
> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>          2050/asterisk
> unix  2      [ ACC ]     STREAM     OUVINDO       484
> 2050/asterisk       /var/run/asterisk/asterisk.ctl
> unix  2      [ ]         DGRAM                    11686    2050/asterisk
>
> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>> Could you post the result of "ip addr" command, and
"netstat -anp | grep
>> ast" after the reload?
>>
>> I suspect something else is going on here...
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Vitor Mazuco

2016-Aug-29 14:40 UTC

head link

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

Sorry,

I just see warning.



2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at
gmail.com>:> I just see  warning?
>
>
> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>> This shows that asterisk's IAX is already bound to all adapters -
so
>> that's
>> good.  Symptomatically does your IAX stop working?  Or do you just see
a
>> warning?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
>> Mazuco
>> Sent: Monday, August 29, 2016 8:46 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring
>> bindport/bindaddr
>> on reload
>>
>> Hi, see the log below
>>
>> root at AsteriskSlave:~# ip addr
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN
>> group default
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group
>> default qlen 1000
>>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast
>> state UP group default qlen 1000
>>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>>        valid_lft forever preferred_lft forever
>>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>>        valid_lft 86398sec preferred_lft 43198sec
>>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>>        valid_lft forever preferred_lft forever
>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group
>> default qlen 1000
>>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>>
>> and
>>
>> root at AsteriskSlave:~# netstat -anp | grep ast
>> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
>> OU?A       2050/asterisk
>> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
>> OU?A       2050/asterisk
>> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>>          2050/asterisk
>> unix  2      [ ACC ]     STREAM     OUVINDO       484
>> 2050/asterisk       /var/run/asterisk/asterisk.ctl
>> unix  2      [ ]         DGRAM                    11686   
2050/asterisk
>>
>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>>> Could you post the result of "ip addr" command, and
"netstat -anp | grep
>>> ast" after the reload?
>>>
>>> I suspect something else is going on here...
>>>
>>>
>>>
>>> --
>>>
_____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
--
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29,
2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Telium Technical Support

2016-Aug-29 15:17 UTC

head link

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

Oh!  In that case ignore it.

Asterisk won't rebind the adapter if you've only changed parameters. 
The message is misleading

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Vitor Mazuco
Sent: Monday, August 29, 2016 10:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on
reload

Sorry,

I just see warning.



2016-08-29 11:40 GMT-03:00, Vitor Mazuco <vitor.mazuco at
gmail.com>:> I just see  warning?
>
>
> 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>> This shows that asterisk's IAX is already bound to all adapters -
so
>> that's
>> good.  Symptomatically does your IAX stop working?  Or do you just see
a
>> warning?
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
>> Mazuco
>> Sent: Monday, August 29, 2016 8:46 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring
>> bindport/bindaddr
>> on reload
>>
>> Hi, see the log below
>>
>> root at AsteriskSlave:~# ip addr
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN
>> group default
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>        valid_lft forever preferred_lft forever
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group
>> default qlen 1000
>>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
>> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast
>> state UP group default qlen 1000
>>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>>        valid_lft forever preferred_lft forever
>>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>>        valid_lft 86398sec preferred_lft 43198sec
>>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>>        valid_lft forever preferred_lft forever
>> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group
>> default qlen 1000
>>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>>
>> and
>>
>> root at AsteriskSlave:~# netstat -anp | grep ast
>> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
>> OU?A       2050/asterisk
>> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
>> OU?A       2050/asterisk
>> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>>          2050/asterisk
>> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>>          2050/asterisk
>> unix  2      [ ACC ]     STREAM     OUVINDO       484
>> 2050/asterisk       /var/run/asterisk/asterisk.ctl
>> unix  2      [ ]         DGRAM                    11686   
2050/asterisk
>>
>> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>>> Could you post the result of "ip addr" command, and
"netstat -anp | grep
>>> ast" after the reload?
>>>
>>> I suspect something else is going on here...
>>>
>>>
>>>
>>> --
>>>
_____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com
--
>>>
>>> Join the Asterisk Community at the 13th AstriCon, September 27-29,
2016
>>>       http://www.asterisk.org/community/astricon-user-conference
>>>
>>> New to Asterisk? Start here:
>>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
      http://www.asterisk.org/community/astricon-user-conference

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk users - Aug 2016 - IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload