thr3ads.net - asterisk users - [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload [Aug 2016]

If this information is useful, please help other people find it:
Share via:

Vitor Mazuco

2016-Aug-29 12:46 UTC

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

Hi, see the log below

root at AsteriskSlave:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
    link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
    inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
       valid_lft forever preferred_lft forever
    inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
       valid_lft 86398sec preferred_lft 43198sec
    inet6 fe80::2e0:4cff:fe44:195/64 scope link
       valid_lft forever preferred_lft forever
4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff

and

root at AsteriskSlave:~# netstat -anp | grep ast
tcp        0      0 0.0.0.0:2000            0.0.0.0:*
OU?A       2050/asterisk
tcp        0      0 0.0.0.0:5338            0.0.0.0:*
OU?A       2050/asterisk
udp        0      0 0.0.0.0:38180           0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:4520            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:4659            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:2727            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:5000            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:5089            0.0.0.0:*
         2050/asterisk
unix  2      [ ACC ]     STREAM     OUVINDO       484
2050/asterisk       /var/run/asterisk/asterisk.ctl
unix  2      [ ]         DGRAM                    11686    2050/asterisk

2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:> Could you post the result of "ip addr" command, and "netstat
-anp | grep
> ast" after the reload?
>
> I suspect something else is going on here...
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>

Telium Technical Support

2016-Aug-29 14:30 UTC

head link

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

This shows that asterisk's IAX is already bound to all adapters - so
that's good.  Symptomatically does your IAX stop working?  Or do you just
see a warning?

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Vitor Mazuco
Sent: Monday, August 29, 2016 8:46 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on
reload

Hi, see the log below

root at AsteriskSlave:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
    link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
    inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
       valid_lft forever preferred_lft forever
    inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
       valid_lft 86398sec preferred_lft 43198sec
    inet6 fe80::2e0:4cff:fe44:195/64 scope link
       valid_lft forever preferred_lft forever
4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
    link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff

and

root at AsteriskSlave:~# netstat -anp | grep ast
tcp        0      0 0.0.0.0:2000            0.0.0.0:*
OU?A       2050/asterisk
tcp        0      0 0.0.0.0:5338            0.0.0.0:*
OU?A       2050/asterisk
udp        0      0 0.0.0.0:38180           0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:4520            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:4659            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:2727            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:5000            0.0.0.0:*
         2050/asterisk
udp        0      0 0.0.0.0:5089            0.0.0.0:*
         2050/asterisk
unix  2      [ ACC ]     STREAM     OUVINDO       484
2050/asterisk       /var/run/asterisk/asterisk.ctl
unix  2      [ ]         DGRAM                    11686    2050/asterisk

2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:> Could you post the result of "ip addr" command, and "netstat
-anp | grep
> ast" after the reload?
>
> I suspect something else is going on here...
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
      http://www.asterisk.org/community/astricon-user-conference

New to Asterisk? Start here:
      https://wiki.asterisk.org/wiki/display/AST/Getting+Started

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Vitor Mazuco

2016-Aug-29 14:40 UTC

head link

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

I just see  warning?


2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at
telium.ca>:> This shows that asterisk's IAX is already bound to all adapters - so
that's
> good.  Symptomatically does your IAX stop working?  Or do you just see a
> warning?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor
Mazuco
> Sent: Monday, August 29, 2016 8:46 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr
> on reload
>
> Hi, see the log below
>
> root at AsteriskSlave:~# ip addr
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> group default
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 scope host lo
>        valid_lft forever preferred_lft forever
>     inet6 ::1/128 scope host
>        valid_lft forever preferred_lft forever
> 2: p3p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
>     link/ether 00:13:3b:12:02:21 brd ff:ff:ff:ff:ff:ff
> 3: p4p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP group default qlen 1000
>     link/ether 00:e0:4c:44:01:95 brd ff:ff:ff:ff:ff:ff
>     inet 192.168.25.25/24 brd 192.168.25.255 scope global p4p1
>        valid_lft forever preferred_lft forever
>     inet6 2804:7f1:4080:fe45:2e0:4cff:fe44:195/64 scope global dynamic
>        valid_lft 86398sec preferred_lft 43198sec
>     inet6 fe80::2e0:4cff:fe44:195/64 scope link
>        valid_lft forever preferred_lft forever
> 4: p5p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
>     link/ether 14:dd:a9:82:38:ff brd ff:ff:ff:ff:ff:ff
>
> and
>
> root at AsteriskSlave:~# netstat -anp | grep ast
> tcp        0      0 0.0.0.0:2000            0.0.0.0:*
> OU?A       2050/asterisk
> tcp        0      0 0.0.0.0:5338            0.0.0.0:*
> OU?A       2050/asterisk
> udp        0      0 0.0.0.0:38180           0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:4520            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:4659            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:2727            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:5000            0.0.0.0:*
>          2050/asterisk
> udp        0      0 0.0.0.0:5089            0.0.0.0:*
>          2050/asterisk
> unix  2      [ ACC ]     STREAM     OUVINDO       484
> 2050/asterisk       /var/run/asterisk/asterisk.ctl
> unix  2      [ ]         DGRAM                    11686    2050/asterisk
>
> 2016-08-26 19:21 GMT-03:00, Telium Technical Support <support at
telium.ca>:
>> Could you post the result of "ip addr" command, and
"netstat -anp | grep
>> ast" after the reload?
>>
>> I suspect something else is going on here...
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>>       http://www.asterisk.org/community/astricon-user-conference
>>
>> New to Asterisk? Start here:
>>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
>       http://www.asterisk.org/community/astricon-user-conference
>
> New to Asterisk? Start here:
>       https://wiki.asterisk.org/wiki/display/AST/Getting+Started
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

asterisk users - Aug 2016 - IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload

[asterisk-users] IAX UNREACHABLE : Ignoring bindport/bindaddr on reload