I am trying to do an install of asterisk by source... dahdi 2.11.1, asterisk 11.22.0 libpri-1.5.0 on CentOS 6.7 (not my first time doing so, but this is a remote system someone else setup) All installed well, compiled fine but when I run asterisk it is not recognizing the card. output log gives me: dahdi_open: Unable to specify channel 1: No such device or address lsmod | grep dahdi shows dahdi_voicebus 53074 1 wctdm24xxp dahdi 224394 2 wctdm24xxp,dahdi_voicebus crc_ccitt 1717 2 wctdm24xxp,dahdi which looks correct. dahdi_hardware -v pci:0000:04:00.0 wctdm24xxp+ d161:0800 Wildcard TDM800P dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM800P name=WCTDM/0 manufacturer=Digium devicetype=Wildcard TDM800P location=PCI Bus 04 Slot 01 basechan=1 totchans=8 irq=0 type=analog port=1,FXO port=2,FXO port=3,FXO port=4,FXO port=5,none port=6,none port=7,none port=8,none So I think dahdi looks good... I have asterisk configured with more /etc/asterisk/chan_dahdi.conf [channels] pridialplan=unknown prilocaldialplan=unknown signalling=fxs_ks relaxdtmf=yes context=smvoice-incoming group=1 channel => 1-8 All these packages are installed: yum install -y make wget openssl-devel ncurses-devel newt-devel libxml2-devel kernel-devel gcc gcc-c++ sqlite-devel libuuid-devel What next step(s) do I need to get asterisk happy? Thanks, jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160503/a5ba5c27/attachment.html>