Hello everyone, I have some problems to enable push the Zoiper
Windows Phone in my Asterisk 11.
Below is the result of CLI
== Using SIP RTP CoS mark 5
-- Executing [1033 at ramais:1] Answer("SIP/1030-00000201",
"") in new stack
> 0x7efc90024190 -- Probation passed - setting RTP source
address to 179.XX.XXX.XX:57741
[Feb 29 12:32:28] NOTICE[4348][C-000001ce]: res_rtp_asterisk.c:4441
ast_rtp_read: Unknown RTP codec 95 received from '179.XX.XX.XX:57741'
> 0x7efc90024190 -- Probation passed - setting RTP source
address to 179.XX.XX.XX:57741
-- Executing [1033 at ramais:2] Set("SIP/1030-00000201",
"location=")
in new stack
-- Executing [1033 at ramais:3] Verbose("SIP/1030-00000201",
"0,
getting push info ") in new stack
getting push info
-- Executing [1033 at ramais:4] Set("SIP/1030-00000201",
"regx="X-PUSH-URI=([0-9a-zA-Z\.\:\/\_]+)"") in new stack
-- Executing [1033 at ramais:5] Set("SIP/1030-00000201",
"push=") in new stack
-- Executing [1033 at ramais:6] System("SIP/1030-00000201",
"/usr/bin/push.sh ") in new stack
-- Executing [1033 at ramais:7] Wait("SIP/1030-00000201",
"1") in new stack
-- Executing [1033 at ramais:8] Dial("SIP/1030-00000201",
"SIP/1033")
in new stack
[Feb 29 12:32:29] WARNING[4348][C-000001ce]: app_dial.c:2437
dial_exec_full: Unable to create channel of type 'SIP' (cause 20 -
Subscriber absent)
== Everyone is busy/congested at this time (1:0/0/1)
-- Auto fallthrough, channel 'SIP/1030-00000201' status is
'CHANUNAVAIL'
asterisk*CLI>
I've created the file more push.sh qualification in the dialplan. But the
Windows Phone can not run on Asterisk.
Does anyone know another method for this?
Thanks in advanced.