asterisk users - Feb 2016 - Passing Caller ID through Digium Gateway

Hi All,

I've setup a Digium G100 VoIP gateway to replace an internal PCI VoIP 
card in our Asterisk PBX.  When using the VoIP card the callerid entries 
listed in sip.conf were displayed when calling someone over the PSTN.  
Now, however, though the gateway it just displays the default number 
assigned to our PRI.  I'm wondering if anyone having experience with the 
Digium gateways can point me in the right direction to have the gateway 
respect the callerid entries listed in sip.conf.  We are using an older 
Asterisk 1.6 build.

Thanks in advanced for the help!!

Ferdinand

> Hi All,
> 
> I've setup a Digium G100 VoIP gateway to replace an internal PCI VoIP 
> card in our Asterisk PBX.  When using the VoIP card the callerid entries 
> listed in sip.conf were displayed when calling someone over the PSTN. 
> Now, however, though the gateway it just displays the default number 
> assigned to our PRI.  I'm wondering if anyone having experience with
the
> Digium gateways can point me in the right direction to have the gateway 
> respect the callerid entries listed in sip.conf.  We are using an older 
> Asterisk 1.6 build.
We use G100 and 200s at a few of our sites and caller id passes through 
just fine. Check under Configuration -> call routing rules to make sure 
you don't have a caller ID name and number set in there. You have to take 
it off of Simple Entry Mode to see the options.

Also, on your SIP Endopoint configuration, under the call settings tab, 
make sure you have your Caller ID Presentation set correctly. From the 
help on that option:

Caller ID Presentation:Handles Caller ID presentation on outgoing calls. 
Allow for prohibiting Caller ID presentation, and defines whether the 
information has been screened by an authoritative source. Options other 
than screening, allowed, and prohibited indicate that the Caller ID was 
provided by the network. 

______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160219/235394c2/attachment.html>