asterisk users - Jan 2016 - Mixing PJSIP realtime and flat files

Hello,

Is it possible to mix PJSIP realtime and flat file configuration in
pjsip,conf?

What we want is to set up endpoints in the ps_endpoints table with some
columns set but most being NULL, and then allow end-customers to optionally
add configuration by adding a pjsip.conf section.

For example, in ps_endpoinds might be an endpoint with id "asterisk-1"
with
the transport, aors, auth, and context columns set but all other fields
NULL. Then the end-customer could add a [asterisk-1] section in pjsip.conf
which sets the codecs they want to enable.

We tried this but it seemed that the [asterisk-1] section in pjsip.conf had
no effect. Our sorcery.conf is attached.

Is this possible, and how do we do it? Thanks very much for any advice.

-- 
David Cunningham, Voisonics
http://voisonics.com/
USA: +1 213 221 1092
UK: +44 (0) 20 3298 1642
Australia: +61 (0) 2 8063 9019
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160122/51fe7d94/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sorcery.conf
Type: application/octet-stream
Size: 498 bytes
Desc: not available
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160122/51fe7d94/attachment.obj>

David Cunningham wrote:
> Hello,
>
> Is it possible to mix PJSIP realtime and flat file configuration in
> pjsip,conf?
>
> What we want is to set up endpoints in the ps_endpoints table with some
> columns set but most being NULL, and then allow end-customers to
> optionally add configuration by adding a pjsip.conf section.
>
> For example, in ps_endpoinds might be an endpoint with id
"asterisk-1"
> with the transport, aors, auth, and context columns set but all other
> fields NULL. Then the end-customer could add a [asterisk-1] section in
> pjsip.conf which sets the codecs they want to enable.
>
> We tried this but it seemed that the [asterisk-1] section in pjsip.conf
> had no effect. Our sorcery.conf is attached.
>
> Is this possible, and how do we do it? Thanks very much for any advice.
It's not possible to do this. Each source (realtime, config file) 
provides the complete definition.

-- 
Joshua Colp
Digium, Inc. | Senior Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - US
Check us out at: www.digium.com & www.asterisk.org

Shame, but thank you very much for the reply Joshua.


On 22 January 2016 at 10:26, Joshua Colp <jcolp at digium.com> wrote:
> David Cunningham wrote:
>
>> Hello,
>>
>> Is it possible to mix PJSIP realtime and flat file configuration in
>> pjsip,conf?
>>
>> What we want is to set up endpoints in the ps_endpoints table with some
>> columns set but most being NULL, and then allow end-customers to
>> optionally add configuration by adding a pjsip.conf section.
>>
>> For example, in ps_endpoinds might be an endpoint with id
"asterisk-1"
>> with the transport, aors, auth, and context columns set but all other
>> fields NULL. Then the end-customer could add a [asterisk-1] section in
>> pjsip.conf which sets the codecs they want to enable.
>>
>> We tried this but it seemed that the [asterisk-1] section in pjsip.conf
>> had no effect. Our sorcery.conf is attached.
>>
>> Is this possible, and how do we do it? Thanks very much for any advice.
>>
>
> It's not possible to do this. Each source (realtime, config file)
provides
> the complete definition.
>
> --
> Joshua Colp
> Digium, Inc. | Senior Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - US
> Check us out at: www.digium.com & www.asterisk.org
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
David Cunningham, Voisonics
http://voisonics.com/
USA: +1 213 221 1092
UK: +44 (0) 20 3298 1642
Australia: +61 (0) 2 8063 9019
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20160122/a4ebd70c/attachment.html>