thr3ads.net - asterisk users - [asterisk-users] can ooh323 work with cisco router? [May 2015]

If this information is useful, please help other people find it:
Share via:

s m

2015-May-06 06:58 UTC

[asterisk-users] can ooh323 work with cisco router?

hello Dmitry

thank you for your reply. Ok, you are right. i want to configure trunk h323
between asterisk 11.13.1 and 2800 cisco router.  this is my scenario:

PBX(100)--->cisco--->asterisk11.13.1---->PBX(200)

when i call from 100 to 200, everything is ok but when i call from 200 to
100, phone rings but after i answer it, i have no voice and call terminates
after 5 seconds. this is ooh323 debug(in asterisk11.13.1 system):

ooh323_get_rtp_peer  OOH323/peer-2-5 -> (null):0, 1

this ia h322_log:

10:42:10:835  Processing MakeCall command ooh323c_o_3
10:42:10:835  Created a new call (outgoing, ooh323c_o_3)
10:42:10:835  Enabled RTP/CISCO DTMF capability for (outgoing, ooh323c_o_3)
10:42:10:835  Enabled RFC2833 DTMF capability for (outgoing, ooh323c_o_3)
10:42:10:835  Dtmf mode set to H.245(alphanumeric) for (outgoing,
ooh323c_o_3)
10:42:10:835  Dtmf mode set to H.245(signal) for (outgoing, ooh323c_o_3)
10:42:10:835  INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:835  INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:835  INFO: create cmd connect for call: 80494a048
10:42:10:846  Processing MakeCall command ooh323c_o_3
10:42:10:846  INFO: FinCall returned 80494a048 for call: ooh323c_o_3
10:42:10:846  Parsing destination 192.168.0.139:1720
10:42:10:846  Trying to connect to remote endpoint(192.168.0.139:1720)
(IPv4) to setup H2250 channel (outgoing, ooh323c_o_3)
10:42:10:847  H2250 transmiter channel creation - successful (outgoing,
ooh323c_o_3)
10:42:10:847  Determining IP address for outgoing call in multihomed mode.
(outgoing, ooh323c_o_3)
10:42:10:847  Using local ip 192.168.0.71 for outgoing
call(multihomedMode). (outgoing, ooh323c_o_3)
10:42:10:847  Building OpenLogicalChannel for Receive  Capability
(outgoing, ooh323c_o_3)
10:42:10:848  Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:848  Receive channel of type audio started (outgoing, ooh323c_o_3)
10:42:10:848  Building OpenLogicalChannel for transmit Capability
(outgoing, ooh323c_o_3)
10:42:10:848  Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:848  Added 2 fast start elements to SETUP message (outgoing,
ooh323c_o_3)
10:42:10:848  Built SETUP message (outgoing, ooh323c_o_3)
10:42:10:848  Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:848  Sent Message - Setup (outgoing, ooh323c_o_3)
10:42:10:861  H.225 Call Proceeding message received (outgoing, ooh323c_o_3)
10:42:10:884  H.225 Alerting message received (outgoing, ooh323c_o_3)
10:42:10:884  Built terminal capability set message (outgoing, ooh323c_o_3)
10:42:10:884  Building Facility message for tunneling
OOTerminalCapabilitySet (outgoing, ooh323c_o_3)
10:42:10:884  Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:884  Sent Message - Facility(OOTerminalCapabilitySet) (outgoing,
ooh323c_o_3)
10:42:10:884  Tunneled Message - TerminalCapabilitySet (outgoing,
ooh323c_o_3)
10:42:10:889  H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Unsupported data capability type
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Unsupported cap type encountered. Ignoring. (outgoing,
ooh323c_o_3)
10:42:10:889  Built TerminalCapabilitySet Ack (outgoing, ooh323c_o_3)
10:42:10:889  Building Facility message for tunneling
OOTerminalCapabilitySetAck (outgoing, ooh323c_o_3)
10:42:10:889  Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:889  Sent Message - Facility(OOTerminalCapabilitySetAck)
(outgoing, ooh323c_o_3)
10:42:10:889  Tunneled Message - TerminalCapabilitySetAck (outgoing,
ooh323c_o_3)
10:42:10:890  H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:890  Master Slave Determination received (outgoing, ooh323c_o_3)
10:42:10:890  Determining master-slave based on StatusDeterminationNumber
(outgoing, ooh323c_o_3)
10:42:10:890  Built MasterSlave determination Ack (outgoing, ooh323c_o_3)
10:42:10:890  Building Facility message for tunneling OOMasterSlaveAck
(outgoing, ooh323c_o_3)
10:42:10:890  MasterSlaveDetermination done - Master(outgoing, ooh323c_o_3)
10:42:10:890  Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:890  Sent Message - Facility(OOMasterSlaveAck) (outgoing,
ooh323c_o_3)
10:42:10:890  Tunneled Message - MasterSlaveDeterminationAck (outgoing,
ooh323c_o_3)
10:42:10:890  H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:894  H.225 Facility message Received (outgoing, ooh323c_o_3)
10:42:10:894  Listing logical channel 1001 cap 2 state 4 for (outgoing,
ooh323c_o_3)
10:42:10:894  Listing logical channel 1002 cap 2 state 4 for (outgoing,
ooh323c_o_3)
10:42:10:894  Opening logical channels (outgoing, ooh323c_o_3)
10:42:10:894  Looking for matching capabilities. (outgoing, ooh323c_o_3)
10:42:10:894  Created new logical channel entry (outgoing, ooh323c_o_3)
10:42:10:895  Built OpenLogicalChannel-OO_G711ALAW64K (outgoing,
ooh323c_o_3)
10:42:10:895  Building Facility message for tunneling OOOpenLogicalChannel
(outgoing, ooh323c_o_3)
10:42:10:895  Sending Q931 message (outgoing, ooh323c_o_3)
10:42:10:895  Sent Message - Facility(OOOpenLogicalChannel) (outgoing,
ooh323c_o_3)
10:42:10:895  Tunneled Message - OpenLogicalChannel(1003). (outgoing,
ooh323c_o_3)
10:42:21:947  H.225 Release Complete message received (outgoing,
ooh323c_o_3)
10:42:21:947  Cause of Release Complete is 10. (outgoing, ooh323c_o_3)
10:42:21:947  Closing H.245 connection (outgoing, ooh323c_o_3)
10:42:21:947  In ooEndCall call state is - OO_CALL_CLEARED (outgoing,
ooh323c_o_3)
10:42:21:947  Cleaning Call (outgoing, ooh323c_o_3)-
reason:OO_REASON_REMOTE_CLEARED
10:42:21:947  Clearing all logical channels (outgoing, ooh323c_o_3)
10:42:21:947  Stopped Receive channel 1001 (outgoing, ooh323c_o_3)
10:42:21:947  ERROR: No Open LogicalChannels - Failed
FindLogicalChannelByChannelNo (outgoing, ooh323c_o_3
10:42:21:947  Removing call 80494a048: ooh323c_o_3
10:42:21:947  Removed call (outgoing, ooh323c_o_3) from list
10:42:21:947  Ending Call Monitor thread


cisco debug shows rtp message with src address 0.0.0.0. i really don't know
how i should fix it. please help me.

thanks
SAM


On Wed, May 6, 2015 at 10:44 AM, Dmitry Melekhov <dm at belkam.com> wrote:
> 06.05.2015 10:06, s m ?????:
>
>> hello every body,
>>
>> i have big problem to configure h323 trunk between cisco router and
>> asterisk 11.13.1 which uses ooh323 module. any body knows if ooh323
module
>> can work with cisco routers or not???? (in gateway mode, it is ok and
>> register in cisco gatekeeper but i can not configure trunk h323)
>>
>>
>>  we use chan_ooh323  with cisco for long time with some issues, but...
> only issue is not solved in current asterisk version is
> https://issues.asterisk.org/jira/browse/ASTERISK-24400
>
> so you have to be more specific in your "big problem" description
;-)
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150506/3ab9d7e9/attachment.html>

Dmitry Melekhov

2015-May-06 07:26 UTC

head link

[asterisk-users] can ooh323 work with cisco router?

06.05.2015 10:58, s m ?????:

Hello!

I'm not h323 expert, may be somebody else can understand from this log 
what is happening, but I can't :-(

Could you, please, provide log with

tracelevel=6

in ooh323.conf ?

Thank you!
> hello Dmitry
>
> thank you for your reply. Ok, you are right. i want to configure trunk 
> h323 between asterisk 11.13.1 and 2800 cisco router.  this is my scenario:
>
> PBX(100)--->cisco--->asterisk11.13.1---->PBX(200)
>
> when i call from 100 to 200, everything is ok but when i call from 200 
> to 100, phone rings but after i answer it, i have no voice and call 
> terminates after 5 seconds. this is ooh323 debug(in asterisk11.13.1 
> system):
>
> ooh323_get_rtp_peer  OOH323/peer-2-5 -> (null):0, 1
>
>

s m

2015-May-07 04:17 UTC

head link

[asterisk-users] can ooh323 work with cisco router?

hello

thanks Dmitry for your useful hints. i enable debug and solve my problem:).
it was codec compatibility problem. but it is so strange; if i set codec
g711alaw in cisco router and asterisk, i have the mentioned problem but if
i set codec to transparent in cisco router, every thing will be ok. is
there any difference between g711 codecs which cisco and asterisk utilize?


On Wed, May 6, 2015 at 11:56 AM, Dmitry Melekhov <dm at belkam.com> wrote:
> 06.05.2015 10:58, s m ?????:
>
> Hello!
>
> I'm not h323 expert, may be somebody else can understand from this log
> what is happening, but I can't :-(
>
> Could you, please, provide log with
>
> tracelevel=6
>
> in ooh323.conf ?
>
> Thank you!
>
>  hello Dmitry
>>
>> thank you for your reply. Ok, you are right. i want to configure trunk
>> h323 between asterisk 11.13.1 and 2800 cisco router.  this is my
scenario:
>>
>> PBX(100)--->cisco--->asterisk11.13.1---->PBX(200)
>>
>> when i call from 100 to 200, everything is ok but when i call from 200
to
>> 100, phone rings but after i answer it, i have no voice and call
terminates
>> after 5 seconds. this is ooh323 debug(in asterisk11.13.1 system):
>>
>> ooh323_get_rtp_peer  OOH323/peer-2-5 -> (null):0, 1
>>
>>
>>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150507/d25f3005/attachment.html>

Possibly Parallel Threads

Search for more possibly parallel threads

asterisk users - May 2015 - can ooh323 work with cisco router?

[asterisk-users] can ooh323 work with cisco router?

[asterisk-users] can ooh323 work with cisco router?

[asterisk-users] can ooh323 work with cisco router?

Possibly Parallel Threads