Dmitriy Sirant
2014-Nov-12 16:02 UTC
[asterisk-users] E1 - Cisco - Asterisk and vice verso
Hi, Change my Dynastar E1 gateway to Cisco with E1 module, but can't make easiest dialplan. All my routing i made on asterisk, so i need that cisco all calls from E1 send via sip to Asterisk and all calls came from Asterisk by sip send to E1. From E1 to Asterisk already work, but can't understand how send all from Asterisk SIP to E1 ? Can you help ? Thank you
On Wed, Nov 12, 2014 at 10:02 AM, Dmitriy Sirant <lex at skoda.com.ua> wrote:> Hi, > > Change my Dynastar E1 gateway to Cisco with E1 module, but can't make > easiest dialplan. All my routing i made on asterisk, so i need that cisco > all calls from E1 send via sip to Asterisk and all calls came from Asterisk > by sip send to E1. From E1 to Asterisk already work, but can't understand > how send all from Asterisk SIP to E1 ? > > Can you help ?If you are taking SIP calls into Asterisk and want to send them out E1, you need an Asterisk-compatible E1 board, such as: http://www.digium.com/en/products/telephony-cards/digital/single-span Your question isn't very specific, so if you are having problems with dialplan you will need to elaborate on Asterisk version, hardware drivers and Asterisk channel drivers in use, etc. -- Rusty Newton Digium, Inc. | Community Support Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - US direct: +1 256 428 6200 Check us out at: http://digium.com & http://asterisk.org
Dmitriy Sirant
2014-Nov-15 18:48 UTC
[asterisk-users] E1 - Cisco - Asterisk and vice verso
On 2014-11-12 16:02:53 +0000, Dmitriy Sirant said:> Hi, > > Change my Dynastar E1 gateway to Cisco with E1 module, but can't make > easiest dialplan. All my routing i made on asterisk, so i need that > cisco all calls from E1 send via sip to Asterisk and all calls came > from Asterisk by sip send to E1. From E1 to Asterisk already work, but > can't understand how send all from Asterisk SIP to E1 ? > > Can you help ? > > Thank youProblem was in new ios version (c3825-adventerprisek9-mz.151-4.M7.bin) where by default closed all incoming sip session, and i must enable it by: voice service voip ip address trusted list ipv4 192.168.132.248 255.255.255.255