asterisk users - Oct 2014 - Register multiple phones to a single AOR with PJSIP

I just finished installing Asterisk 13 on our test server and I can 
now use PJSIP to register phones and make and receive calls. The only 
problem I am having is that when I register multiple phones to a single 
account only one of them rings.  The AOR for the account has maxcontacts 
at 3.

     If I do a pjsip show endpoints I can see two "Contact" entries 
which I take to mean that both phones have registered:

Endpoint:  101                                                  Not in 
use    0 of inf
      InAuth:  101/101
         Aor:  101                                                3
       Contact:  101/sip:101 at 192.168.2.193:5063 Avail             178.681
       Contact:  101/sip:101 at 192.168.2.197:58086;transport=UDP;r 
Avail               4.198
   Transport:  transport-udp             udp      0      0 0.0.0.0:5060

     I have tried with several phones and have rebooted the Asterisk 
server and phones several times just to make sure configs are loaded 
properly but I cannot get Asterisk to ring multiple phones at once. I 
used 
https://wiki.asterisk.org/wiki/display/AST/Setting+up+PJSIP+Realtime to 
configure this instance of Asterisk.  Am I missing some setting to allow 
Asterisk to ring all phones registered to a single AOR?

-- 
Telecomunicaciones Abiertas de M?xico S.A. de C.V.
Carlos Ch?vez
+52 (55)9116-91161

?You need to change your dialplan to use the PJSIP_DIAL_CONTACTS function
like this:

exten => _X.,1,Dial(${PJSIP_DIAL_CONTACTS(200)},30)?

It expands to the list of contacts, separated by &, so that the contacts
are dialed at the same time.

The documentation page you reference should be updated to include that
detail.


On Thu, Oct 30, 2014 at 2:18 PM, Carlos Chavez <cursor at
telecomabmex.com>
wrote:
>     I just finished installing Asterisk 13 on our test server and I can
> now use PJSIP to register phones and make and receive calls. The only
> problem I am having is that when I register multiple phones to a single
> account only one of them rings.  The AOR for the account has maxcontacts at
> 3.
>
>     If I do a pjsip show endpoints I can see two "Contact"
entries which I
> take to mean that both phones have registered:
>
> Endpoint:  101                                                  Not in
> use    0 of inf
>      InAuth:  101/101
>         Aor:  101                                                3
>       Contact:  101/sip:101 at 192.168.2.193:5063 Avail             178.681
>       Contact:  101/sip:101 at 192.168.2.197:58086;transport=UDP;r Avail
>            4.198
>   Transport:  transport-udp             udp      0      0 0.0.0.0:5060
>
>     I have tried with several phones and have rebooted the Asterisk server
> and phones several times just to make sure configs are loaded properly but
> I cannot get Asterisk to ring multiple phones at once. I used
> https://wiki.asterisk.org/wiki/display/AST/Setting+up+PJSIP+Realtime to
> configure this instance of Asterisk.  Am I missing some setting to allow
> Asterisk to ring all phones registered to a single AOR?
>
> --
> Telecomunicaciones Abiertas de M?xico S.A. de C.V.
> Carlos Ch?vez
> +52 (55)9116-91161
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
[image: Digium logo]
Scott Griepentrog
Digium, Inc ? Software Developer
445 Jan Davis Drive NW ? Huntsville, AL 35806 ? US
direct/fax: +1 256 428 6239 ? mobile: +1 256 580 6090
Check us out at: http://digium.com ? http://asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20141030/3fa3f42f/attachment.html>