Hi, I have some problems with a Queue and state interface. In the queue we have 7 deskphones and 7 cordless. Every user have one deskphone and one cordless phone. I have set up every user with hints, eg: exten => 802,hint,SIP/9144-802&SIP/9144-902 exten => 902,hint,SIP/9144-902&SIP/9144-802 Queue_members: Queue_name Interface state_interface 9144-vmi SIP/9144-802 hint:802 at hints 9144-vmi SIP/9144-902 hint:902 at hints 802 = is a cordless phone 902 = is a deskphone Both are in use by same user. To the problem, when we have RingInUse = 0, we only get calls on one of the devices (because the other one gets in RINGING state). If the user is not on phone we want both phones to call, but if the user is in phone the other phone should not call. Any id?es... Med v?nlig h?lsning / Best regards Magnus L?fqvist VMI Internet Services AB Hantverksv?gen 15 760 40 V?DD?, SWEDEN Tel +46 176 20 89 00 (02) Fax +46 176 20 89 19 E-mail: ml at vmi.se Homepage: www.vmi.se<http://www.vmi.se/> Facebook: www.vmi.se/facebook<http://www.vmi.se/facebook> *** VMI E-mail disclaimer *** The information in this e-mail is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any opinions or advice contained in this e-mail are subject to the terms and conditions expressed in the VMI General terms and conditions -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20131016/8ed18940/attachment.html>