Hi All, I am having an issue with layer 2 in BRi connection configured using Misdn: after the BRI line working fine, a technician from our phone company came in to add another number, after testing with his ISDN phone and BRI line is working, from our asterisk server it is not :(. When I check ports with "misdn show port x" it says: * Port 4 Type TE Prot. PMP L2Link DOWN L1Link:UP Blocked:0 Debug:7 (as you can see here L1Link=UP *but* L2Link=DOWN) since we didn't change any setting from our end, it maybe an change from our phone provider end that caused to have a *mismatch in the layer 2 connection*. *what we tried is:* - we did reboot our phone system several times. - I did reconfigure the ISDN trunk setting to refresh things (*using the same config that worked before*) - I did use another phone system that was not used before (to eliminate the possibility that our current phone system has hardware issues) with no success, it *displaying the same Layer 2 issue found*. - I turned debugging on when making calls, it shows that calls go through as programmed but it hits a down line (because of L2 issue) : IP0x*CLI> -- Executing [9020823541 at COUNTRY_DIAL:1] misdn_check_l2l1("SIP/8425-00438004", "g:trunk_m2|20") in new stack IP0x*CLI> P[ 0] Checking Ports in group: trunk_m2 P[ 0] trying port 1 P[ 0] trying port 2 P[ 0] trying port 3 P[ 0] trying port 4 -- Executing [9020823541 at COUNTRY_DIAL:2] Dial("SIP/8425-00438004", "mISDN/g:trunk_m2/020823541") in new stack P[ 0] --> Group Call group: trunk_m2 P[ 1] Group [trunk_m2] Port [1] P[ 2] Group [trunk_m2] Port [2] P[ 3] Group [trunk_m2] Port [3] P[ 4] Group [trunk_m2] Port [4] P[ 4] portup:1 IP0x*CLI> P[ 0] --> * NEW CHANNEL dad:020823541 oad:(null) IP0x*CLI> P[ 4] * Queuing chan 0x43d644 IP0x*CLI> P[ 4] read_config: Getting Config IP0x*CLI> P[ 4] config_jb: Called IP0x*CLI> P[ 4] --> * CallGrp: PickupGrp: IP0x*CLI> P[ 4] --> TON: Unknown IP0x*CLI> P[ 4] --> LTON: Unknown IP0x*CLI> P[ 4] --> CTON: Unknown IP0x*CLI> P[ 4] * CALL: g:trunk_m2/020823541 IP0x*CLI> P[ 4] --> * dad:9020823541 tech:mISDN/6-u3 ctx:DID_trunk_m2 IP0x*CLI> P[ 4] --> * adding2newbc ext 9020823541 IP0x*CLI> P[ 4] --> * adding2newbc callerid 8425 IP0x*CLI> P[ 4] update_config: Getting Config IP0x*CLI> P[ 4] --> pres: -1 screen: -1 IP0x*CLI> P[ 4] --> pres: 0 IP0x*CLI> P[ 4] --> PRES: Allowed (0x0) IP0x*CLI> P[ 4] --> SCREEN: Unscreened (0x0) IP0x*CLI> P[ 4] NO OPTS GIVEN IP0x*CLI> P[ 4] SENDEVENT: stack->nt:0 stack->uperid:40000403 IP0x*CLI> P[ 4] I SEND:SETUP oad:8425 dad:020823541 pid:5 IP0x*CLI> P[ 4] --> bc_state:BCHAN_CLEANED IP0x*CLI> P[ 4] --> channel:0 mode:TE cause:16 ocause:16 rad: cad: IP0x*CLI> P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0 IP0x*CLI> P[ 4] --> caps:Speech pi:0 keypad: sending_complete:0 IP0x*CLI> P[ 4] --> screen:0 --> pres:0 IP0x*CLI> P[ 4] --> addr:0 l3id:90003 b_stid:0 layer_id:0 IP0x*CLI> P[ 4] --> facility:Fac_None out_facility:Fac_None IP0x*CLI> P[ 4] --> urate:0 rate:16 mode:0 user1:0 IP0x*CLI> P[ 4] --> bc:1130c58 h:0 sh:0 IP0x*CLI> P[ 4] --> new_l3id 90004 IP0x*CLI> P[ 4] Sending msg, prim:30580 addr:41000403 dinfo:90004 IP0x*CLI> P[ 4] --> * SEND: State Dialing pid:5 IP0x*CLI> -- Called g:trunk_m2/020823541 IP0x*CLI> P[ 4] handle_frm: frm->addr:42000402 frm->prim:3f182 P[ 4] --> lib: RELEASE_CR Ind with l3id:90004 P[ 4] --> lib: CLEANING UP l3id: 90004 P[ 4] I IND :CLEAN_UP oad:8425 dad:020823541 pid:5 state:CALLING P[ 4] hangup_chan called P[ 4] --> queue_hangup P[ 4] release_chan: bc with l3id: 90004 P[ 4] * RELEASING CHANNEL pid:5 ctx:DID_trunk_m2 dad:020823541 oad:9020823541 state: CALLING P[ 4] --> * State Down P[ 4] --> Setting AST State to down P[ 4] $$$ CLEANUP CALLED pid:5 P[ 4] $$$ Already cleaned up bc with stid :0 P[ 4] [Jan 3 16:59:14] DEBUG[2944]: chan_misdn.c:2525 misdn_hangup: misdn_hangup(mISDN/6-u3) P[ 0] misdn_hangup called, without 'chan_list' obj == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/8425-00438004' status is 'CHANUNAVAIL' Idx:0 stack->cchan:0 in_use:0 Chan:1 P[ 4] Idx:1 stack->cchan:0 in_use:0 Chan:2 P[ 4] Idx:2 stack->cchan:0 in_use:0 Chan:3 P[ 0] Got empty Msg.. I appreciate any help! -- Khalid -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/0b354b1f/attachment.htm>
Hi All, I am having an issue with layer 2 in BRi connection configured using Misdn: after the BRI line working fine, a technician from our phone company came in to add another number, after testing with his ISDN phone and BRI line is working, from our asterisk server it is not :(. When I check ports with "misdn show port x" it says: * Port 4 Type TE Prot. PMP L2Link DOWN L1Link:UP Blocked:0 Debug:7 (as you can see here L1Link=UP *but* L2Link=DOWN) since we didn't change any setting from our end, it maybe an change from our phone provider end that caused to have a *mismatch in the layer 2 connection*. *what we tried is:* - we did reboot our phone system several times. - I did reconfigure the ISDN trunk setting to refresh things (*using the same config that worked before*) - I did use another phone system that was not used before (to eliminate the possibility that our current phone system has hardware issues) with no success, it *displaying the same Layer 2 issue found*. - I turned debugging on when making calls, it shows that calls go through as programmed but it hits a down line (because of L2 issue) : IP0x*CLI> -- Executing [9020823541 at COUNTRY_DIAL:1] misdn_check_l2l1("SIP/8425- 00438004", "g:trunk_m2|20") in new stack IP0x*CLI> P[ 0] Checking Ports in group: trunk_m2 P[ 0] trying port 1 P[ 0] trying port 2 P[ 0] trying port 3 P[ 0] trying port 4 -- Executing [9020823541 at COUNTRY_DIAL:2] Dial("SIP/8425-00438004", "mISDN/g:trunk_m2/020823541") in new stack P[ 0] --> Group Call group: trunk_m2 P[ 1] Group [trunk_m2] Port [1] P[ 2] Group [trunk_m2] Port [2] P[ 3] Group [trunk_m2] Port [3] P[ 4] Group [trunk_m2] Port [4] P[ 4] portup:1 IP0x*CLI> P[ 0] --> * NEW CHANNEL dad:020823541 oad:(null) IP0x*CLI> P[ 4] * Queuing chan 0x43d644 IP0x*CLI> P[ 4] read_config: Getting Config IP0x*CLI> P[ 4] config_jb: Called IP0x*CLI> P[ 4] --> * CallGrp: PickupGrp: IP0x*CLI> P[ 4] --> TON: Unknown IP0x*CLI> P[ 4] --> LTON: Unknown IP0x*CLI> P[ 4] --> CTON: Unknown IP0x*CLI> P[ 4] * CALL: g:trunk_m2/020823541 IP0x*CLI> P[ 4] --> * dad:9020823541 tech:mISDN/6-u3 ctx:DID_trunk_m2 IP0x*CLI> P[ 4] --> * adding2newbc ext 9020823541 IP0x*CLI> P[ 4] --> * adding2newbc callerid 8425 IP0x*CLI> P[ 4] update_config: Getting Config IP0x*CLI> P[ 4] --> pres: -1 screen: -1 IP0x*CLI> P[ 4] --> pres: 0 IP0x*CLI> P[ 4] --> PRES: Allowed (0x0) IP0x*CLI> P[ 4] --> SCREEN: Unscreened (0x0) IP0x*CLI> P[ 4] NO OPTS GIVEN IP0x*CLI> P[ 4] SENDEVENT: stack->nt:0 stack->uperid:40000403 IP0x*CLI> P[ 4] I SEND:SETUP oad:8425 dad:020823541 pid:5 IP0x*CLI> P[ 4] --> bc_state:BCHAN_CLEANED IP0x*CLI> P[ 4] --> channel:0 mode:TE cause:16 ocause:16 rad: cad: IP0x*CLI> P[ 4] --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0 IP0x*CLI> P[ 4] --> caps:Speech pi:0 keypad: sending_complete:0 IP0x*CLI> P[ 4] --> screen:0 --> pres:0 IP0x*CLI> P[ 4] --> addr:0 l3id:90003 b_stid:0 layer_id:0 IP0x*CLI> P[ 4] --> facility:Fac_None out_facility:Fac_None IP0x*CLI> P[ 4] --> urate:0 rate:16 mode:0 user1:0 IP0x*CLI> P[ 4] --> bc:1130c58 h:0 sh:0 IP0x*CLI> P[ 4] --> new_l3id 90004 IP0x*CLI> P[ 4] Sending msg, prim:30580 addr:41000403 dinfo:90004 IP0x*CLI> P[ 4] --> * SEND: State Dialing pid:5 IP0x*CLI> -- Called g:trunk_m2/020823541 IP0x*CLI> P[ 4] handle_frm: frm->addr:42000402 frm->prim:3f182 P[ 4] --> lib: RELEASE_CR Ind with l3id:90004 P[ 4] --> lib: CLEANING UP l3id: 90004 P[ 4] I IND :CLEAN_UP oad:8425 dad:020823541 pid:5 state:CALLING P[ 4] hangup_chan called P[ 4] --> queue_hangup P[ 4] release_chan: bc with l3id: 90004 P[ 4] * RELEASING CHANNEL pid:5 ctx:DID_trunk_m2 dad:020823541 oad:9020823541 state: CALLING P[ 4] --> * State Down P[ 4] --> Setting AST State to down P[ 4] $$$ CLEANUP CALLED pid:5 P[ 4] $$$ Already cleaned up bc with stid :0 P[ 4] [Jan 3 16:59:14] DEBUG[2944]: chan_misdn.c:2525 misdn_hangup: misdn_hangup(mISDN/6-u3) P[ 0] misdn_hangup called, without 'chan_list' obj == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/8425-00438004' status is 'CHANUNAVAIL' Idx:0 stack->cchan:0 in_use:0 Chan:1 P[ 4] Idx:1 stack->cchan:0 in_use:0 Chan:2 P[ 4] Idx:2 stack->cchan:0 in_use:0 Chan:3 P[ 0] Got empty Msg.. I appreciate any help! -- Khalid -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120103/c8874910/attachment.htm>