Hi, I am running asterisk with konference . tried to increase the conference voice but not success i tried to add in diaplain SetGlobalVar(Set(VOLUME(TX)=10)) SetGlobalVar(Set(VOLUME(RX)=10)) but it does not effect.. any hint ? Zeeshan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110803/75f250fe/attachment.htm>
You need to provide more information - is line in SIP or DAHDI, what release of Asterisk, etc. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan Ali Shah Sent: Wednesday, August 03, 2011 9:13 AM To: asterisk-users at lists.digium.com Subject: [asterisk-users] Increasing volume ? Hi, I am running asterisk with konference . tried to increase the conference voice but not success i tried to add in diaplain SetGlobalVar(Set(VOLUME(TX)=10)) SetGlobalVar(Set(VOLUME(RX)=10)) but it does not effect.. any hint ? Zeeshan -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110803/82efa3f3/attachment.htm>
Hi, In CLI please press Konference then Tab from keyboard then you will see all the command of Konference. You may use AMI connection for batter usw. On 3 Aug 2011 19:46, "Danny Nicholas" <danny at debsinc.com> wrote:> You need to provide more information - is line in SIP or DAHDI, whatrelease> of Asterisk, etc. > > > > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan Ali > Shah > Sent: Wednesday, August 03, 2011 9:13 AM > To: asterisk-users at lists.digium.com > Subject: [asterisk-users] Increasing volume ? > > > > Hi, I am running asterisk with konference . tried to increase the > conference voice but not success > > i tried to add in diaplain > SetGlobalVar(Set(VOLUME(TX)=10)) > SetGlobalVar(Set(VOLUME(RX)=10)) > > but it does not effect.. > > > any hint ? > > Zeeshan >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110803/8a9b7b61/attachment.htm>
I tried few times this, but no improvement . meeting*CLI> konference volume 72193 up any way to do it form extensions.conf in dialplan ? since konfernece name is dynamic Zeeshan On Wed, Aug 3, 2011 at 4:30 PM, virendra bhati <virbhati at gmail.com> wrote:> Hi, > > In CLI please press Konference then Tab from keyboard then you will see all > the command of Konference. > You may use AMI connection for batter usw. > On 3 Aug 2011 19:46, "Danny Nicholas" <danny at debsinc.com> wrote: > > You need to provide more information - is line in SIP or DAHDI, what > release > > of Asterisk, etc. > > > > > > > > From: asterisk-users-bounces at lists.digium.com > > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan > Ali > > Shah > > Sent: Wednesday, August 03, 2011 9:13 AM > > To: asterisk-users at lists.digium.com > > Subject: [asterisk-users] Increasing volume ? > > > > > > > > Hi, I am running asterisk with konference . tried to increase the > > conference voice but not success > > > > i tried to add in diaplain > > SetGlobalVar(Set(VOLUME(TX)=10)) > > SetGlobalVar(Set(VOLUME(RX)=10)) > > > > but it does not effect.. > > > > > > any hint ? > > > > Zeeshan > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110803/d1c21b10/attachment.htm>
any way to increase volume in dialplan ? i attached the extensions.conf in privious post Zeeshan On Wed, Aug 3, 2011 at 4:33 PM, Zeeshan Ali Shah <zeeshan at infoshield.info>wrote:> > I tried few times this, but no improvement . > > meeting*CLI> konference volume 72193 up > > any way to do it form extensions.conf in dialplan ? since konfernece name > is dynamic > > Zeeshan > > On Wed, Aug 3, 2011 at 4:30 PM, virendra bhati <virbhati at gmail.com> wrote: > >> Hi, >> >> In CLI please press Konference then Tab from keyboard then you will see >> all the command of Konference. >> You may use AMI connection for batter usw. >> On 3 Aug 2011 19:46, "Danny Nicholas" <danny at debsinc.com> wrote: >> > You need to provide more information - is line in SIP or DAHDI, what >> release >> > of Asterisk, etc. >> > >> > >> > >> > From: asterisk-users-bounces at lists.digium.com >> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan >> Ali >> > Shah >> > Sent: Wednesday, August 03, 2011 9:13 AM >> > To: asterisk-users at lists.digium.com >> > Subject: [asterisk-users] Increasing volume ? >> > >> > >> > >> > Hi, I am running asterisk with konference . tried to increase the >> > conference voice but not success >> > >> > i tried to add in diaplain >> > SetGlobalVar(Set(VOLUME(TX)=10)) >> > SetGlobalVar(Set(VOLUME(RX)=10)) >> > >> > but it does not effect.. >> > >> > >> > any hint ? >> > >> > Zeeshan >> > >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110803/0fc026da/attachment.htm>
On 4/08/11 2:12 AM, Zeeshan Ali Shah wrote:> Hi, I am running asterisk with konference . tried to increase the > conference voice but not success > > i tried to add in diaplain > SetGlobalVar(Set(VOLUME(TX)=10)) > SetGlobalVar(Set(VOLUME(RX)=10))Should be: SetGlobalVar(VOLUME(TX)=10) SetGlobalVar(VOLUME(RX)=10) -- Cheers, Matt Riddell _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/exchange.php (Full ITSP Solution) http://www.venturevoip.com/cc.php (Call Centre Solutions)
Tried below, but it still no improvement Zeeshan SetGlobalVar(VOLUME(TX)=10) SetGlobalVar(VOLUME(RX)=10) On Thu, Aug 4, 2011 at 3:47 AM, Matt Riddell <lists at venturevoip.com> wrote:> On 4/08/11 2:12 AM, Zeeshan Ali Shah wrote: > >> Hi, I am running asterisk with konference . tried to increase the >> conference voice but not success >> >> i tried to add in diaplain >> SetGlobalVar(Set(VOLUME(TX)=**10)) >> SetGlobalVar(Set(VOLUME(RX)=**10)) >> > > Should be: > > SetGlobalVar(VOLUME(TX)=10) > SetGlobalVar(VOLUME(RX)=10) > >--> Cheers, > > Matt Riddell > ______________________________**_________________ > > http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) > http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) > http://www.venturevoip.com/cc.**php <http://www.venturevoip.com/cc.php>(Call Centre Solutions) > > > -- > ______________________________**______________________________**_________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110804/6d078db9/attachment.htm>
On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote:> > Tried below, but it still no improvement > > > Zeeshan > SetGlobalVar(VOLUME(TX)=10) > SetGlobalVar(VOLUME(RX)=10)Have you tried just doing Set(VOLUME(TX)=10) and then 5 etc to make sure you are actually changing the volume? -- Cheers, Matt Riddell _______________________________________________ http://www.venturevoip.com/news.php (Daily Asterisk News) http://www.venturevoip.com/exchange.php (Full ITSP Solution) http://www.venturevoip.com/cc.php (Call Centre Solutions)
Yes i tried the followings one by one with differnet values.. Set(VOLUME(TX)=10) ;SetGlobalVar(VOLUME(TX)=10) ;SetGlobalVar(SetVOLUME(RX)=10) , but no improvement.. dont i have to change something in dialplan ? On Thu, Aug 4, 2011 at 11:17 AM, Matt Riddell <lists at venturevoip.com> wrote:> On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote: > >> >> Tried below, but it still no improvement >> >> >> Zeeshan >> SetGlobalVar(VOLUME(TX)=10) >> SetGlobalVar(VOLUME(RX)=10) >> > > Have you tried just doing > > Set(VOLUME(TX)=10) > > and then 5 etc to make sure you are actually changing the volume? > > > -- > Cheers, > > Matt Riddell > ______________________________**_________________ > > http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) > http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) > http://www.venturevoip.com/cc.**php <http://www.venturevoip.com/cc.php>(Call Centre Solutions) > > -- > ______________________________**______________________________**_________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110804/8463a9f8/attachment.htm>
but got these as well [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=Unknown directive: Set(VOLUME(TX) at line 9 -- IGNORING!!! [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=Unknown directive: SetGlobalVar(SetVOLUME(TX) at line 10 -- IGNORING!!! [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=Unknown directive: SetGlobalVar(SetVOLUME(RX) at line 11 -- IGNORING!!! On Thu, Aug 4, 2011 at 12:20 PM, Zeeshan Ali Shah <zeeshan at infoshield.info>wrote:> Yes i tried the followings one by one with differnet values.. > Set(VOLUME(TX)=10) > ;SetGlobalVar(VOLUME(TX)=10) > ;SetGlobalVar(SetVOLUME(RX)=10) > > > , but no improvement.. dont i have to change something in dialplan ? > > > On Thu, Aug 4, 2011 at 11:17 AM, Matt Riddell <lists at venturevoip.com>wrote: > >> On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote: >> >>> >>> Tried below, but it still no improvement >>> >>> >>> Zeeshan >>> SetGlobalVar(VOLUME(TX)=10) >>> SetGlobalVar(VOLUME(RX)=10) >>> >> >> Have you tried just doing >> >> Set(VOLUME(TX)=10) >> >> and then 5 etc to make sure you are actually changing the volume? >> >> >> -- >> Cheers, >> >> Matt Riddell >> ______________________________**_________________ >> >> http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) >> http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) >> http://www.venturevoip.com/cc.**php <http://www.venturevoip.com/cc.php>(Call Centre Solutions) >> >> -- >> ______________________________**______________________________**_________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110804/c1b7b640/attachment.htm>
any hint since it seems asterisk treat it as unknown directive On Thu, Aug 4, 2011 at 12:22 PM, Zeeshan Ali Shah <zeeshan at infoshield.info>wrote:> but got these as well > > [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=> Unknown directive: Set(VOLUME(TX) at line 9 -- IGNORING!!! > [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=> Unknown directive: SetGlobalVar(SetVOLUME(TX) at line 10 -- IGNORING!!! > [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=> Unknown directive: SetGlobalVar(SetVOLUME(RX) at line 11 -- IGNORING!!! > > > On Thu, Aug 4, 2011 at 12:20 PM, Zeeshan Ali Shah <zeeshan at infoshield.info > > wrote: > >> Yes i tried the followings one by one with differnet values.. >> Set(VOLUME(TX)=10) >> ;SetGlobalVar(VOLUME(TX)=10) >> ;SetGlobalVar(SetVOLUME(RX)=10) >> >> >> , but no improvement.. dont i have to change something in dialplan ? >> >> >> On Thu, Aug 4, 2011 at 11:17 AM, Matt Riddell <lists at venturevoip.com>wrote: >> >>> On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote: >>> >>>> >>>> Tried below, but it still no improvement >>>> >>>> >>>> Zeeshan >>>> SetGlobalVar(VOLUME(TX)=10) >>>> SetGlobalVar(VOLUME(RX)=10) >>>> >>> >>> Have you tried just doing >>> >>> Set(VOLUME(TX)=10) >>> >>> and then 5 etc to make sure you are actually changing the volume? >>> >>> >>> -- >>> Cheers, >>> >>> Matt Riddell >>> ______________________________**_________________ >>> >>> http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) >>> http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) >>> http://www.venturevoip.com/cc.**php <http://www.venturevoip.com/cc.php>(Call Centre Solutions) >>> >>> -- >>> ______________________________**______________________________** >>> _________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>> http://www.asterisk.org/hello >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >>> >> >> >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110804/2b7e786b/attachment.htm>
> -----Original Message----- > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- > bounces at lists.digium.com] On Behalf Of Zeeshan Ali Shah > Sent: Thursday, August 04, 2011 9:33 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Increasing volume ? > > any hint since it seems asterisk treat it as unknown directiveWhat version of Asterisk are you using?
Set(VOLUME(TX)=10) is correct but you arent putting it in a context so asterisk doesnt know how to deal with it do this [bigbluebutton] exten => _.,1,Set(VOLUME(TX)=10) exten => _.,1,Set(VOLUME(RX)=10) exten => _.,n,Goto(start-dialplan,s,1) exten => _.,n,Hangup On Thu, Aug 4, 2011 at 4:33 PM, Zeeshan Ali Shah <zeeshan at infoshield.info>wrote:> any hint since it seems asterisk treat it as unknown directive > > > On Thu, Aug 4, 2011 at 12:22 PM, Zeeshan Ali Shah <zeeshan at infoshield.info > > wrote: > >> but got these as well >> >> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=>> Unknown directive: Set(VOLUME(TX) at line 9 -- IGNORING!!! >> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=>> Unknown directive: SetGlobalVar(SetVOLUME(TX) at line 10 -- IGNORING!!! >> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: ==!!=>> Unknown directive: SetGlobalVar(SetVOLUME(RX) at line 11 -- IGNORING!!! >> >> >> On Thu, Aug 4, 2011 at 12:20 PM, Zeeshan Ali Shah < >> zeeshan at infoshield.info> wrote: >> >>> Yes i tried the followings one by one with differnet values.. >>> Set(VOLUME(TX)=10) >>> ;SetGlobalVar(VOLUME(TX)=10) >>> ;SetGlobalVar(SetVOLUME(RX)=10) >>> >>> >>> , but no improvement.. dont i have to change something in dialplan ? >>> >>> >>> On Thu, Aug 4, 2011 at 11:17 AM, Matt Riddell <lists at venturevoip.com>wrote: >>> >>>> On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote: >>>> >>>>> >>>>> Tried below, but it still no improvement >>>>> >>>>> >>>>> Zeeshan >>>>> SetGlobalVar(VOLUME(TX)=10) >>>>> SetGlobalVar(VOLUME(RX)=10) >>>>> >>>> >>>> Have you tried just doing >>>> >>>> Set(VOLUME(TX)=10) >>>> >>>> and then 5 etc to make sure you are actually changing the volume? >>>> >>>> >>>> -- >>>> Cheers, >>>> >>>> Matt Riddell >>>> ______________________________**_________________ >>>> >>>> http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) >>>> http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) >>>> http://www.venturevoip.com/cc.**php <http://www.venturevoip.com/cc.php>(Call Centre Solutions) >>>> >>>> -- >>>> ______________________________**______________________________** >>>> _________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>>> http://www.asterisk.org/hello >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >>>> >>> >>> >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110804/77f32f2b/attachment.htm>
hmm no effect. may be i shd read asterisk book for knowing the flow and underlying architecture first. /Zee On Thu, Aug 4, 2011 at 4:06 PM, Israel Gottlieb <isrlgb at gmail.com> wrote:> Set(VOLUME(TX)=10) is correct but you arent putting it in a context so > asterisk doesnt know how to deal with it > > > do this > > [bigbluebutton] > exten => _.,1,Set(VOLUME(TX)=10) > exten => _.,1,Set(VOLUME(RX)=10) > exten => _.,n,Goto(start-dialplan,s,1) > exten => _.,n,Hangup > > > > On Thu, Aug 4, 2011 at 4:33 PM, Zeeshan Ali Shah <zeeshan at infoshield.info>wrote: > >> any hint since it seems asterisk treat it as unknown directive >> >> >> On Thu, Aug 4, 2011 at 12:22 PM, Zeeshan Ali Shah < >> zeeshan at infoshield.info> wrote: >> >>> but got these as well >>> >>> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: >>> ==!!== Unknown directive: Set(VOLUME(TX) at line 9 -- IGNORING!!! >>> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: >>> ==!!== Unknown directive: SetGlobalVar(SetVOLUME(TX) at line 10 -- >>> IGNORING!!! >>> [Aug 4 12:21:08] WARNING[3082]: pbx_config.c:1588 pbx_load_config: >>> ==!!== Unknown directive: SetGlobalVar(SetVOLUME(RX) at line 11 -- >>> IGNORING!!! >>> >>> >>> On Thu, Aug 4, 2011 at 12:20 PM, Zeeshan Ali Shah < >>> zeeshan at infoshield.info> wrote: >>> >>>> Yes i tried the followings one by one with differnet values.. >>>> Set(VOLUME(TX)=10) >>>> ;SetGlobalVar(VOLUME(TX)=10) >>>> ;SetGlobalVar(SetVOLUME(RX)=10) >>>> >>>> >>>> , but no improvement.. dont i have to change something in dialplan ? >>>> >>>> >>>> On Thu, Aug 4, 2011 at 11:17 AM, Matt Riddell <lists at venturevoip.com>wrote: >>>> >>>>> On 4/08/11 9:16 PM, Zeeshan Ali Shah wrote: >>>>> >>>>>> >>>>>> Tried below, but it still no improvement >>>>>> >>>>>> >>>>>> Zeeshan >>>>>> SetGlobalVar(VOLUME(TX)=10) >>>>>> SetGlobalVar(VOLUME(RX)=10) >>>>>> >>>>> >>>>> Have you tried just doing >>>>> >>>>> Set(VOLUME(TX)=10) >>>>> >>>>> and then 5 etc to make sure you are actually changing the volume? >>>>> >>>>> >>>>> -- >>>>> Cheers, >>>>> >>>>> Matt Riddell >>>>> ______________________________**_________________ >>>>> >>>>> http://www.venturevoip.com/**news.php<http://www.venturevoip.com/news.php>(Daily Asterisk News) >>>>> http://www.venturevoip.com/**exchange.php<http://www.venturevoip.com/exchange.php>(Full ITSP Solution) >>>>> http://www.venturevoip.com/cc.**php<http://www.venturevoip.com/cc.php>(Call Centre Solutions) >>>>> >>>>> -- >>>>> ______________________________**______________________________** >>>>> _________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> New to Asterisk? Join us for a live introductory webinar every Thurs: >>>>> http://www.asterisk.org/hello >>>>> >>>>> asterisk-users mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >>>>> >>>> >>>> >>> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> New to Asterisk? Join us for a live introductory webinar every Thurs: >> http://www.asterisk.org/hello >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110805/cb07665f/attachment.htm>
Well even in my example there is a mistake in the second line change the 1 to a
2
exten =>_.,1,Set(VOLUME(TX)=10)
exten =>_.,2,Set(VOLUME(RX)=10)
-----Original Message-----
From: Zeeshan Ali Shah <zeeshan at infoshield.info>
Sender: asterisk-users-bounces at lists.digium.com
Date: Fri, 5 Aug 2011 14:52:52
To: Asterisk Users Mailing List - Non-Commercial Discussion<asterisk-users at
lists.digium.com>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Increasing volume ?
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
On 08/03/2011 08:47 PM, Matt Riddell wrote:> On 4/08/11 2:12 AM, Zeeshan Ali Shah wrote: >> Hi, I am running asterisk with konference . tried to increase the >> conference voice but not success >> >> i tried to add in diaplain >> SetGlobalVar(Set(VOLUME(TX)=10)) >> SetGlobalVar(Set(VOLUME(RX)=10)) > > Should be: > > SetGlobalVar(VOLUME(TX)=10) > SetGlobalVar(VOLUME(RX)=10)Dialplan functions cannot be set globally. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com & www.asterisk.org
Hi, please use it then it will be helpfull for your application exten => 66,1,Answer() exten => 66,n,Set(CHANNEL(txgain)=20) exten => 66,n,Set(CHANNEL(rxgain)=20) exten => 66,n,Hangup() On Thu, Aug 11, 2011 at 3:26 AM, Kevin P. Fleming <kpfleming at digium.com>wrote:> On 08/03/2011 08:47 PM, Matt Riddell wrote: > >> On 4/08/11 2:12 AM, Zeeshan Ali Shah wrote: >> >>> Hi, I am running asterisk with konference . tried to increase the >>> conference voice but not success >>> >>> i tried to add in diaplain >>> SetGlobalVar(Set(VOLUME(TX)=**10)) >>> SetGlobalVar(Set(VOLUME(RX)=**10)) >>> >> >> Should be: >> >> SetGlobalVar(VOLUME(TX)=10) >> SetGlobalVar(VOLUME(RX)=10) >> > > Dialplan functions cannot be set globally. > > -- > Kevin P. Fleming > Digium, Inc. | Director of Software Technologies > Jabber: kfleming at digium.com | SIP: kpfleming at digium.com | Skype: kpfleming > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > Check us out at www.digium.com & www.asterisk.org > > > -- > ______________________________**______________________________**_________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/**mailman/listinfo/asterisk-**users<http://lists.digium.com/mailman/listinfo/asterisk-users> >-- ----- Thanks and regards Virendra Bhati +91-9172341457 Software Engineer -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110929/29dc58b1/attachment.htm>