I did duplicate cucm as cucm2. I was a bit confused as to what changed.
However, it was the same results. I commented out the cucm1 instances so it was
forced to use cucm2. however I still get the same results:
== Using SIP RTP CoS mark 5
-- Executing [8000 at myphones:1] Dial("SIP/2002-00000006",
"SIP/cucm2") in new stack
== Using SIP RTP CoS mark 5
-- Called cucm2
[Jul 23 00:57:50] NOTICE[31563]: chan_sip.c:19198 handle_response_invite: Failed
to authenticate on INVITE to '"Macbook 2002" <sip:2002 at
172.16.200.232>;tag=as2fda8b5f'
-- SIP/cucm2-00000007 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Auto fallthrough, channel 'SIP/2002-00000006' status is
'CONGESTION'
Thanks,
Mitch
On Jul 24, 2011, at 5:02 AM, asterisk-users-request at lists.digium.com wrote:
> Message: 6
> Date: Sat, 23 Jul 2011 13:04:32 -0500
> From: "Danny Nicholas" <danny at debsinc.com>
> Subject: Re: [asterisk-users] One way calling on asterisk to cisco
> call manager integration
> To: "'Asterisk Users Mailing List - Non-Commercial
Discussion'"
> <asterisk-users at lists.digium.com>
> Message-ID: <019601cc4962$f9683300$ec389900$@debsinc.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Try duplicating cucm as cucm2 with qualify=no and dialing on cucm2.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20110724/56648085/attachment.htm>