I am using Sangoma hardware, so I do not think fxotune applies here. <br>
<br>
I tried it anyway, no change.<br>
<br>
If I set an extension to dtmfmode=info and add the same in chan_dahdi, no calls
will go out at all.<br>
<br>
If I set an extension to dtmfmode=auto and leave dtmfmode=info in chan_dahdi, no
calls will go out<br>
<br>
If I set an extension to dtmfmode=rfc2833 and and add the same in
chan_dahdi, some calls will go out (About 30%) and remote ivr's will
sometimes work (About 30%).<br>
<br>
If I set an extension to dtmfmode=rfc2833 and add dtmfmode=info in
chan_dahdi, this gives me the best result which is still pretty bad, I'd
say 50% of the calls will go out and 50% get the AT&T operator
saying "The call not be completed as dialed". Remote ivr's work
about
70% of the time.<br>
<br>
In all the above, adding toneduration=300 and relaxdtmf=y or n in chan_dahdi,
made absolutely no difference.<br>
<br>
What I'm confused with is I have an identical setup at another office with
no problems!<br>
<br>
Is there anyway to see what asterisk is dialing out? I can see the extension
using asterisk -r and the number shown is correct. <br>
<br>I am still thinking it has something to do with the phones. I may have
to go onsite and try a phone with older firmware or maybe a softphone.
<br><br><b>----- Original Message -----</b><br>
<b>From:</b> vmedina@apcn.net [mailto:vmedina@apcn.net]<br>
<b>To:</b> asterisk-users@lists.digium.com<br>
<b>Sent:</b> Wed, 29 Jun 2011 13:37:41 -0400 (EDT)<br>
<b>Subject:</b> Re: [asterisk-users] Polycom ip320 dtmf
issues<br><br>
<div><p>In free pbx it is set to rfc... I tried inband and it works
better but then dialing out became a bigger
problem.<br><br><font color="#888888">Sent from my
android device.</font><br><br>-----Original
Message-----<br>From: Adam Moffett <<a
href="mailto:adamlists@plexicomm.net"
target='_blank'>adamlists@plexicomm.net</a>><br>To:
Asterisk Users Mailing List - Non-Commercial Discussion <<a
href="mailto:asterisk-users@lists.digium.com"
target='_blank'>asterisk-users@lists.digium.com</a>><br>Sent:
Wed, 29 Jun <a href="tel:201112" target='_blank'>2011
12</a>:37 PM<br>Subject: Re: [asterisk-users] Polycom ip320 dtmf
issues<br><br>Which dtmf method?<br><br>I think we use
inband here without issue.<br><br>I am dtmf recognition issues. Out
bound calls go though dahdi trunk/sangoma a400. Dtmf tones are not being
recognized. Is there any issues with the latest polycom firmware?
<br><br><font>Sent from my android
device.</font><br><br>--
_____________________________________________________________________ --
Bandwidth and Colocation Provided by <a
href="http://www.api-digital.com"
target='_blank'>http://www.api-digital.com</a> -- New to
Asterisk? Join us for a live introductory webinar every Thurs: <a
href="http://www.asterisk.org/hello"
target='_blank'>http://www.asterisk.org/hello</a>
asterisk-users mailing list To UNSUBSCRIBE or update options visit: <a
href="http://lists.digium.com/mailman/listinfo/asterisk-users"
target='_blank'>http://lists.digium.com/mailman/listinfo/asterisk-users</a>
<br><br><br></p>
</div>