I'm kind of at a loss to diagnose problems like this, yet we get them a lot.
- The ATA (Thomson 784 in this particular case) is logged into the
Asterisk server. 'sip show peer' shows their IP address, port, and
useragent.
- The ATA is connected directly to the internet (no NAT, but the sip
configuration has nat=always) and logs in to our server, which is also
directly connected to the internet without any firewalling.
- When people call this extension, the console shows that Asterisk accepts
the call from the DAHDI channel, executes the SIP call, then... nothing.
It either waits until the timeout set in the dialplan is up, then goes to
voicemail (next step), or it sends a 'hangup cause 102' to the DAHDI
channel. Conspicuously missing is the console saying "SIP/username is
ringing".
The following is redacted output from such a call:
-- Executing [6045551212 at local:1] Dial("DAHDI/6-1",
"SIP/sipuser|20")
in new stack
-- Called sipuser
-- Accepting call from '7785550001' to '6045551212' on
channel 0/6,
span 1
-- Channel 0/6, span 1 got hangup, cause 102
== Spawn extension (local, 6045551212, 1) exited non-zero on
'DAHDI/6-1'
-- Hungup 'DAHDI/6-1'
-- No one is available to answer at this time (1:0/0/0)
|| dave cantera Mobile
2011-May-03 03:46 UTC
[asterisk-users] best current version and motherboard/CPU compatibilities
I've been away from asterisk for a while since 1.4.16 and only installed 1.6 once to run a test... can someone recommend what the best version to install is and the recommended CPU/motherboard for an * box these days? I'm just running about 20 handsets and 4-8 lines with POTS & SIP mix. I remember there were some issues with bios a while back and a TDM card was required for timing conferencing, etc... are these requirements still an issue? I want to setup another * box and was wondering which CPU/motherboard to select... thanks, daveC -- SJREIA South Jersey Real Estate Investors Association Want to invest in Real Estate? come out and join over 450 real estate investors http://www.SJREIA.org Licensed NJ Real Estate Agent Buy This House REALTORs david.cantera at IBSOnecall.com Mobile (856)813-7098 Office (856)324-4488 Pers Fax (646)827-7108 Ofc Fax (888)487-7711 Interlocking Business Solutions, LLC david.cantera at IBSOneCall.com (856)581-8971 Home of the Videophone2009.com
On Tue, May 3, 2011 at 2:50 AM, Ernie Dunbar <maillist at lightspeed.ca> wrote:> I'm kind of at a loss to diagnose problems like this, yet we get them a lot. > > - The ATA (Thomson 784 in this particular case) is logged into the > Asterisk server. 'sip show peer' shows their IP address, port, and > useragent. > - The ATA is connected directly to the internet (no NAT, but the sip > configuration has nat=always) and logs in to our server, which is also > directly connected to the internet without any firewalling. > - When people call this extension, the console shows that Asterisk accepts > the call from the DAHDI channel, executes the SIP call, then... nothing. > It either waits until the timeout set in the dialplan is up, then goes to > voicemail (next step), or it sends a 'hangup cause 102' to the DAHDI > channel. Conspicuously missing is the console saying "SIP/username is > ringing". > > The following is redacted output from such a call: > > > ? ?-- Executing [6045551212 at local:1] Dial("DAHDI/6-1", "SIP/sipuser|20") > in new stack > ? ?-- Called sipuser > ? ?-- Accepting call from '7785550001' to '6045551212' on channel 0/6, > span 1 > > ? ?-- Channel 0/6, span 1 got hangup, cause 102 > ?== Spawn extension (local, 6045551212, 1) exited non-zero on 'DAHDI/6-1' > ? ?-- Hungup 'DAHDI/6-1' > ? ?-- No one is available to answer at this time (1:0/0/0) > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > ? ? ? ? ? ? ? http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-users >Do: sip set debug ip <IP OF DEVICE> and see what it sends to Asterisk.
2011/5/3 Ernie Dunbar <maillist at lightspeed.ca>> I'm kind of at a loss to diagnose problems like this, yet we get them a > lot. > > - The ATA (Thomson 784 in this particular case) is logged into the > Asterisk server. 'sip show peer' shows their IP address, port, and > useragent. > - The ATA is connected directly to the internet (no NAT, but the sip > configuration has nat=always) and logs in to our server, which is also > directly connected to the internet without any firewalling. > - When people call this extension, the console shows that Asterisk accepts > the call from the DAHDI channel, executes the SIP call, then... nothing. > It either waits until the timeout set in the dialplan is up, then goes to > voicemail (next step), or it sends a 'hangup cause 102' to the DAHDI > channel. Conspicuously missing is the console saying "SIP/username is > ringing". > > The following is redacted output from such a call: > > > -- Executing [6045551212 at local:1] Dial("DAHDI/6-1", "SIP/sipuser|20") > in new stack > -- Called sipuser > -- Accepting call from '7785550001' to '6045551212' on channel 0/6, > span 1 > > -- Channel 0/6, span 1 got hangup, cause 102 > == Spawn extension (local, 6045551212, 1) exited non-zero on 'DAHDI/6-1' > -- Hungup 'DAHDI/6-1' > -- No one is available to answer at this time (1:0/0/0) > > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >Could you add an Answer() statement (just in case) ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110503/e6ef49b3/attachment.htm>
|| dave cantera Mobile
2011-May-04 16:10 UTC
[asterisk-users] best current version and motherboard/CPU compatibilities
doug, why are you shaking!?!?... do you have a better recommendation? daveC Doug Lytle wrote:> C F wrote: >> model name : AMD-K6(tm) 3D processor >> > > *shudder* > > Doug >-- SJREIA South Jersey Real Estate Investors Association Want to invest in Real Estate? come out and join over 450 real estate investors http://www.SJREIA.org Licensed NJ Real Estate Agent Buy This House REALTORs david.cantera at IBSOnecall.com Mobile (856)813-7098 Office (856)324-4488 Pers Fax (646)827-7108 Ofc Fax (888)487-7711 Interlocking Business Solutions, LLC david.cantera at IBSOneCall.com (856)581-8971 Home of the Videophone2009.com
Paul Hayes
2011-May-04 16:17 UTC
[asterisk-users] best current version and motherboard/CPU compatibilities
On 04/05/11 17:10, || dave cantera Mobile wrote:> doug, > why are you shaking!?!?... do you have a better recommendation? > daveC >AMD K6 CPU brings back some pretty bad memories from me too.> Doug Lytle wrote: >> C F wrote: >>> model name : AMD-K6(tm) 3D processor >> >> *shudder* >> >> Doug >> >
Doug Lytle
2011-May-04 16:28 UTC
[asterisk-users] best current version and motherboard/CPU compatibilities
|| dave cantera Mobile wrote:> why are you shaking!?!?The AMD K6 and the AMD K6-2 were (At that time) cheaper then what Intel had to offer, I built many systems based on both. Sorry, but that memory, along with the memories of running a BBS, just made me shudder. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
|| dave cantera Mobile
2011-May-04 17:17 UTC
[asterisk-users] best current version and motherboard/CPU compatibilities
paul, doug, I had several AMD athlons 64bit... no problems running centos, suse. they seem solid on 1.4.xx... had a few intel celerons and P4s. they were good as well. guess I was Lucky back then! thanks for supporting the list! daveC Paul Hayes wrote:> On 04/05/11 17:10, || dave cantera Mobile wrote: >> doug, >> why are you shaking!?!?... do you have a better recommendation? >> daveC >> > > AMD K6 CPU brings back some pretty bad memories from me too. > >> Doug Lytle wrote: >>> C F wrote: >>>> model name : AMD-K6(tm) 3D processor >>> >>> *shudder* >>> >>> Doug >>> >> > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- SJREIA South Jersey Real Estate Investors Association Want to invest in Real Estate? come out and join over 450 real estate investors http://www.SJREIA.org Licensed NJ Real Estate Agent Buy This House REALTORs david.cantera at IBSOnecall.com Mobile (856)813-7098 Office (856)324-4488 Pers Fax (646)827-7108 Ofc Fax (888)487-7711 Interlocking Business Solutions, LLC david.cantera at IBSOneCall.com (856)581-8971 Home of the Videophone2009.com