Hi
Scratch that
The value name has changed from Nat to Force Rport
Back to the drawing board
On Wed, 2011-03-02 at 08:57 +0000, Ishfaq Malik wrote:> Hi
>
> After recently upgrading to 1.8.3 I have noticed that the nat setting
> for my peer in my sip table is not making it into the realtime cache.
>
> For example
> * Name : 501
> Realtime peer: Yes, cached
> Secret : <Set>
> MD5Secret : <Not set>
> Remote Secret: <Not set>
> Context : pack-local
> Subscr.Cont. : <Not set>
> Language :
> AMA flags : Unknown
> Transfer mode: open
> CallingPres : Presentation Allowed, Not Screened
> Callgroup :
> Pickupgroup :
> MOH Suggest :
> Mailbox : 501 at local
> VM Extension : asterisk
> LastMsgsSent : 32767/65535
> Call limit : 5
> Max forwards : 0
> Dynamic : Yes
> Callerid : "" <>
> MaxCallBR : 384 kbps
> Expire : 3326
> Insecure : port,invite
> Force rport : Yes
> ACL : No
> DirectMedACL : No
> T.38 support : No
> T.38 EC mode : Unknown
> T.38 MaxDtgrm: -1
> DirectMedia : Yes
> PromiscRedir : No
> User=Phone : No
> Video Support: No
> Text Support : No
> Ign SDP ver : No
> Trust RPID : No
> Send RPID : Yes
> Subscriptions: Yes
> Overlap dial : Yes
> DTMFmode : rfc2833
> Timer T1 : 500
> Timer B : 32000
> ToHost :
> Addr->IP : x.x.x.x:5060
> Defaddr->IP : (null)
> Prim.Transp. : UDP
> Allowed.Trsp : UDP
> Def. Username: PACK501
> SIP Options : (none)
> Codecs : 0x10c (ulaw|alaw|g729)
> Codec Order : (g729:20,alaw:20,ulaw:20)
> Auto-Framing : No
> 100 on REG : Yes
> Status : OK (17 ms)
> Useragent : snom870/8.4.20
> Reg. Contact : sip:501 at x.x.x.x:52753;line=hu9fedy3
> Qualify Freq : 120000 ms
> Sess-Timers : Accept
> Sess-Refresh : uas
> Sess-Expires : 1800 secs
> Min-Sess : 90 secs
> RTP Engine : asterisk
> Parkinglot :
> Use Reason : No
> Encryption : No
>
> But in the DB I have clearly set nat to yes
>
> select name,nat from sip where name ='501';
> +------+-----+
> | name | nat |
> +------+-----+
> | 501 | yes |
> +------+-----+
>
> In all previous versions of asterisk we have used with realtime we would
see a line in the sip show peer looking like:
>
> Nat : Always
>
> Has the table definition changed in asterisk 1.8.3?
> Is there a bug stopping this value being picked up?
>
> Can someone even point me to the correct source files so I can attempt to
try and work out the correct 1.8 sip table definition from there as I can't
find one anywhere at all?
>
> Thanks in advance
>
> Ish
--
Ishfaq Malik
Software Developer
PackNet Ltd
Office: 0161 660 3062