thr3ads.net - asterisk users - No subject [Jan 2011]

If this information is useful, please help other people find it:
Share via:
bogus@does.not.exist.com
2011-Jan-10 07:51 UTC
No subject

l
lines and my 6 internal lines.

For the PC I was planning to use the smallest PC posible like a HP Proliant
Microserver  but it doesn=B4t have space for this PCI card.
Is there another way to interface to 3 external and 6 internal lines??

Thank you for your kind help

On Fri, Feb 18, 2011 at 6:52 AM, Gopalakrishnan A.N <saigop at
gmail.com>wrote:
> Asterisk is open source and you can install in a normal PC itself and you
> can avail all the features that proprietary system has.
>
> If you want to integrate with any VoIP service then a PC with Asterisk is
> enough or else if you want to integrate with PSTN lines then you need FXO
> card to be installed, its a PCI card. Vendors like Sangoma, Digium (from
> Asterisk) were selling these cards. And for internal for your agents if you
> need analog hard phones then you need to have FXS card you can avail these
> FXO and FXS cards in combination. These cards will fit in your PCI slot of
> machine. Configuring these cards are also very easy.
>
> If it is VoIP then you dont need these cards simply install Asterisk in a
> PC and you are done.
>
>
> On Fri, Feb 18, 2011 at 5:38 PM, Terry Brummell <terry at
brummell.net>wrote:
>
>> Yes, I use Elastix myself too.  Funny that I didn=92t mention that one!
>>
>>
>>
>> *From:* asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] *On Behalf Of *DHAVAL
INDRODIYA
>> *Sent:* Friday, February 18, 2011 6:11 AM
>>
>> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
>> *Subject:* Re: [asterisk-users]Newbie=B4s question about Asterisk...
>>
>>
>>
>> i prefer to go with Elastix very easy to setup and maintain and reach
UI
>> rather than freePBX
>>
>> cheers
>> Dhaval
>>
>> On Fri, Feb 18, 2011 at 4:14 PM, Terry Brummell <terry at
brummell.net>
>> wrote:
>>
>> Dean=92s link has references to Trixbox.  TB has a bad, bad, very bad
>> reputation for being very insecure.  Alternatives to TB are FreePBX
& PBX in
>> a Flash.  All are Asterisk based and very easy to set up.
>>
>>
>>
>> *From:* asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dean Collins
>> *Sent:* Thursday, February 17, 2011 7:29 PM
>> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
>> *Subject:* Re: [asterisk-users]Newbie=B4s question about Asterisk...
>>
>>
>>
>> If you already have experience with linux asterisk will be easy for
you.
>>
>>
>>
>> Other people will reply with official links but here is how I use
Asterisk
>> in my small home office www.cognation.net/asterisk
>>
>>
>>
>>
>>
>> Cheers,
>>
>> Dean
>>
>>
>>
>>
>> ------------------------------
>>
>> *From:* asterisk-users-bounces at lists.digium.com [mailto:
>> asterisk-users-bounces at lists.digium.com] *On Behalf Of *Francisco
Javier
>> Cintr=F3n Olgu=EDn
>> *Sent:* Thursday, February 17, 2011 7:26 PM
>> *To:* asterisk-users at lists.digium.com
>> *Subject:* [asterisk-users] Newbie=B4s question about Asterisk...
>>
>>
>>
>> Hi, My name is Francisco from M=E9xico.
>>
>> Here, in my work we have a very very old panasonic PBX(12 years old).
We
>> are growing and we need to increase our external lines(from 3 to 4) and
our
>> internal lines(from 6 to 10). Besides we need voice mail and voice menu
too.
>>
>>
>> We asked for a quote to our panasonic dealer. The whole thing cost
about
>> 4,500 dollars.
>>
>> My boss just saw a thing called Asterisk this morning looking for
options
>> in Google. He asked my to investigate what this thing called Asterisk
is and
>> if we could save some money using it instead of the panasonic solution.
So,
>> here I am.
>>
>> I have some experience as linux sysadmin(we have 1 oracle linux server
and
>> 1 linux print server) nevertheless I don=B4t have any idea where and
how to
>> start this evaluation?
>>
>>
>> Please
>> Would you give us a clue where to see If Asterisk could work for us?
>>
>> Thanks for your kind help.
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
> --
> Thank you  with regards,
> Gopalakrishnan A.N.
> VoIP call - sip:saigop at gtalk2voip.com
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
--bcaec53f9359439b49049c919404
Content-Type: text/html; charset=windows-1252
Content-Transfer-Encoding: quoted-printable

I think I have 3 PSTN lines because I can connect a normal telephone to them all
and make calls between each of them. <br>We have 5 normal telephones and 1
panasonic. <br><br>From what I got I need a PC=A0 and a of PCI card
to interface to my 3 external lines and my 6 internal lines. <br>

<br>For the PC I was planning to use the smallest PC posible like a HP=20
Proliant Microserver=A0 but it doesn=B4t have space for this PCI card.
<br>Is there another way to interface to 3 external and 6 internal
lines??<br><br>Thank you for your kind
help<br><br><div class=3D"gmail_quote">On Fri, Feb
18, 2011 at 6:52 AM, Gopalakrishnan A.N <span
dir=3D"ltr">&lt;<a href=3D"mailto:saigop at
gmail.com">saigop at gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt
0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left:
1ex;">Asterisk is open source and you can install in a normal PC itself
and you can avail all the features that proprietary system has.<div>
<br></div><div>If you want to integrate with any VoIP service
then a PC with Asterisk is enough or else if you want to integrate with PSTN
lines then you need FXO card to be installed, its a PCI card. Vendors like
Sangoma, Digium (from Asterisk) were selling these cards. And for internal for
your agents if you need analog hard phones then you need to have FXS card you
can avail these FXO and FXS cards in combination. These cards will fit in your
PCI slot of machine. Configuring these cards are also very easy.</div>


<div><br></div><div>If it is VoIP then you dont need
these cards simply install Asterisk in a PC and you are
done.=A0</div><div><div><div></div><div
class=3D"h5"><br><br><div
class=3D"gmail_quote">On Fri, Feb 18, 2011 at 5:38 PM, Terry
Brummell <span dir=3D"ltr">&lt;<a
href=3D"mailto:terry at brummell.net"
target=3D"_blank">terry at
brummell.net</a>&gt;</span> wrote:<br>


<blockquote class=3D"gmail_quote" style=3D"margin: 0pt 0pt 0pt
0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div link=3D"blue" vlink=3D"purple"
lang=3D"EN-US"><div><p
class=3D"MsoNormal"><span style=3D"font-size: 11pt; color:
rgb(31, 73, 125);">Yes, I use Elastix myself too.=A0 Funny that I
didn=92t mention that one! </span></p><p
class=3D"MsoNormal">
<span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">=A0</span></p>

<div style=3D"border-width: 1pt medium medium; border-style: solid none
none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color;
padding: 3pt 0in 0in;"><p
class=3D"MsoNormal"><b><span style=3D"font-size:
10pt;">From:</span></b><span style=3D"font-size:
10pt;"> <a href=3D"mailto:asterisk-users-bounces at
lists.digium.com" target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a> [mailto:<a
href=3D"mailto:asterisk-users-bounces at lists.digium.com"
target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a>] <b>On Behalf Of </b>DHAVAL
INDRODIYA<br>


<b>Sent:</b> Friday, February 18, 2011 6:11
AM</span></p><div><div></div><div><br><b>To:</b>
Asterisk Users Mailing List - Non-Commercial
Discussion<br><b>Subject:</b> Re: [asterisk-users]Newbie=B4s
question about Asterisk...</div>


</div><p></p></div><div><div></div><div><p
class=3D"MsoNormal">=A0</p><p
class=3D"MsoNormal" style=3D"margin-bottom: 12pt;">i
prefer to go with Elastix very easy to setup and maintain and reach UI rather
than freePBX <br>

<br>cheers<br>Dhaval</p><div><p
class=3D"MsoNormal">On Fri, Feb 18, 2011 at 4:14 PM, Terry Brummell
&lt;<a href=3D"mailto:terry at brummell.net"
target=3D"_blank">terry at brummell.net</a>&gt;
wrote:</p><div><div><p class=3D"MsoNormal">


<span style=3D"font-size: 11pt; color: rgb(31, 73,
125);">Dean=92s link has references to Trixbox.=A0 TB has a bad, bad,
very bad reputation for being very insecure.=A0 Alternatives to TB are FreePBX
&amp; PBX in a Flash.=A0 All are Asterisk based and very easy to set
up.</span></p>


<p class=3D"MsoNormal"><span style=3D"font-size: 11pt;
color: rgb(31, 73, 125);">=A0</span></p><div><div
style=3D"border-width: 1pt medium medium; border-style: solid none none;
padding: 3pt 0in 0in; border-color: -moz-use-text-color;">


<p class=3D"MsoNormal"><b><span
style=3D"font-size: 10pt;">From:</span></b><span
style=3D"font-size: 10pt;"> <a
href=3D"mailto:asterisk-users-bounces@lists.digium.com"
target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a> [mailto:<a
href=3D"mailto:asterisk-users-bounces at lists.digium.com"
target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a>] <b>On Behalf Of </b>Dean
Collins<br>


<b>Sent:</b> Thursday, February 17, 2011 7:29
PM<br><b>To:</b> Asterisk Users Mailing List - Non-Commercial
Discussion<br><b>Subject:</b> Re: [asterisk-users]Newbie=B4s
question about
Asterisk...</span></p></div></div><div>


<div><p class=3D"MsoNormal">=A0</p><p
class=3D"MsoNormal"><span style=3D"font-size: 10pt; color:
black;">If you already have experience with linux asterisk will be easy
for you.</span></p><p class=3D"MsoNormal"><span
style=3D"font-size: 10pt; color: black;">=A0</span></p>


<p class=3D"MsoNormal"><span style=3D"font-size: 10pt;
color: black;">Other people will reply with official links but here is
how I use Asterisk in my small home office <a
href=3D"http://www.cognation.net/asterisk"
target=3D"_blank">www.cognation.net/asterisk</a>
</span></p>


<p class=3D"MsoNormal"><span style=3D"font-size: 10pt;
color: black;">=A0</span></p><div><p
class=3D"MsoNormal"><span style=3D"color:
black;">=A0</span></p><p
class=3D"MsoNormal"><span style=3D"font-size: 10pt; color:
black;">Cheers,</span></p>


<p class=3D"MsoNormal"><span style=3D"font-size: 10pt;
color: black;">Dean</span></p><p
class=3D"MsoNormal"><span style=3D"color:
black;">=A0</span></p><p
class=3D"MsoNormal"><span style=3D"color:
black;">=A0</span></p></div><div><div
class=3D"MsoNormal" style=3D"text-align: center;"
align=3D"center">


<hr width=3D"100%" align=3D"center"
size=3D"2"></div><p
class=3D"MsoNormal"><b><span style=3D"font-size:
10pt;">From:</span></b><span style=3D"font-size:
10pt;"> <a href=3D"mailto:asterisk-users-bounces at
lists.digium.com" target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a> [mailto:<a
href=3D"mailto:asterisk-users-bounces at lists.digium.com"
target=3D"_blank">asterisk-users-bounces at
lists.digium.com</a>] <b>On Behalf Of </b>Francisco Javier
Cintr=F3n Olgu=EDn<br>


<b>Sent:</b> Thursday, February 17, 2011 7:26
PM<br><b>To:</b> <a href=3D"mailto:asterisk-users at
lists.digium.com" target=3D"_blank">asterisk-users at
lists.digium.com</a><br><b>Subject:</b> [asterisk-users]
Newbie=B4s question about Asterisk...</span></p>


</div><p class=3D"MsoNormal">=A0</p><p
class=3D"MsoNormal">Hi, My name is Francisco from M=E9xico.
<br><br>Here, in my work we have a very very old panasonic PBX(12
years old). We are growing and we need to increase our external lines(from 3 to
4) and our internal lines(from 6 to 10). Besides we need voice mail and voice
menu too. <br>


<br>We asked for a quote to our panasonic dealer. The whole thing cost
about 4,500 dollars. <br><br>My boss just saw a thing called
Asterisk this morning looking for options in Google. He asked my to investigate
what this thing called Asterisk is and if we could save some money using it
instead of the panasonic solution. So, here I am. <br>


<br>I have some experience as linux sysadmin(we have 1 oracle linux server
and 1 linux print server) nevertheless I don=B4t have any idea where and how to
start this evaluation?<br><br><br>Please<br>Would you
give us a clue where to see If Asterisk could work for us?<br>


<br>Thanks for your kind help.
</p></div></div></div></div><p
class=3D"MsoNormal"><br>--<br>_____________________________________________________________________<br>--
Bandwidth and Colocation Provided by <a
href=3D"http://www.api-digital.com"
target=3D"_blank">http://www.api-digital.com</a> --<br>


New to Asterisk? Join us for a live introductory webinar every
Thurs:<br>=A0 =A0 =A0 =A0 =A0 =A0 =A0 <a
href=3D"http://www.asterisk.org/hello"
target=3D"_blank">http://www.asterisk.org/hello</a><br><br>asterisk-users
mailing list<br>To UNSUBSCRIBE or update options visit:<br>


=A0 <a
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users"
target=3D"_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a></p></div><p
class=3D"MsoNormal">=A0</p></div></div></div></div><br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a
href=3D"http://www.api-digital.com"
target=3D"_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
 =A0 =A0 =A0 =A0 =A0 =A0 =A0 <a
href=3D"http://www.asterisk.org/hello"
target=3D"_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
 =A0 <a
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users"
target=3D"_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br><br
clear=3D"all"><br></div></div>-- <br>Thank
you=A0 with regards,<br>


Gopalakrishnan A.N.<div>VoIP call - <a href=3D"mailto:sip%3Asaigop
at gtalk2voip.com" target=3D"_blank">sip:saigop at
gtalk2voip.com</a><br><br></div><br>
</div>
<br>--<br>
_____________________________________________________________________<br>
-- Bandwidth and Colocation Provided by <a
href=3D"http://www.api-digital.com"
target=3D"_blank">http://www.api-digital.com</a> --<br>
New to Asterisk? Join us for a live introductory webinar every Thurs:<br>
 =A0 =A0 =A0 =A0 =A0 =A0 =A0 <a
href=3D"http://www.asterisk.org/hello"
target=3D"_blank">http://www.asterisk.org/hello</a><br>
<br>
asterisk-users mailing list<br>
To UNSUBSCRIBE or update options visit:<br>
 =A0 <a
href=3D"http://lists.digium.com/mailman/listinfo/asterisk-users"
target=3D"_blank">http://lists.digium.com/mailman/listinfo/asterisk-users</a><br></blockquote></div><br>

--bcaec53f9359439b49049c919404--
asterisk users - Jan 2011 - No subject

No subject
