asterisk users - Jan 2011 - CDR issue - Problem logging CDR(userfield) in Master.csv

Dear all,

I am having an issue with CDR logging. What I want to do is log jitter 
variable from RTPAUDIOQOS module into Master.csv at the end of each call.

I am using asterisk version 1.4.26. For CDR purposes, I am using 
cdr_custom, and the content of my cdr_custom.conf is the following:

[mappings]
Master.csv => 
${CDR(dstchannel)},${CDR(clid)},${CDR(cid-num)},${CDR(dst)},${CDR(start)},${CDR(billsec)},${CDR(disposition)},${CDR(userfield)}

In my dialplan, right before my Hangup() call, I have put the following 
(am using AEL, but I guess this is irrelevant)

 Set(JITTER=${CUT(RTPAUDIOQOS,\;,4)});
 Set(CDR(userfield)=${CUT(JITTER,\=,2)});

I make an outgoing call with asterisk debugging mode on. When I hangup 
the call, I see the following in the asterisk cli:

Executing [sw-41-ANSWER at macro-handle_dialstatus:10] 
Set("SIP/FXS1-001666f8", "JITTER=rxjitter=0.004785") in new
stack
- Executing [sw-41-ANSWER at macro-handle_dialstatus:11] 
Set("SIP/FXS1-001666f8", "CDR(userfield)=0.004785") in new
stack

which means that my commands should work.

However, when I check the contents of my Master.csv file, the userfield 
variable is EMPTY :-(

SIP/line1-00141f30,"FXS1" <FXS1>,,2109999999,2011-01-28 
13:21:16,39,ANSWERED,

What could be the problem?

Best Regards and thank you in advance,
Athanasia

-- 
------------------------------
Athanasia Tsertou

Software Engineer

Gennet s.a.

2, Mesogeion Ave., Athens Tower

Athens GR-115 27

Tel: +30 210 74 58 435

Fax: +30 210 74 58 481

Mob: +30 697 87 85 883

e-mail: atsertou at gennetsa.com

On Friday 28 January 2011 05:34:21 Athanasia Tsertou
wrote:
> In my dialplan, right before my Hangup() call, I have put the following
> (am using AEL, but I guess this is irrelevant)
> 
>  Set(JITTER=${CUT(RTPAUDIOQOS,\;,4)});
>  Set(CDR(userfield)=${CUT(JITTER,\=,2)});
Did you put it in the "h" extension?  That is where it needs to be
executed
in order for it to go into the CDR.  If it's not in the "h"
extension,
you're updating the CDR after it has already been posted.

-- 
Tilghman