Hi all,
After a lot of trouble with a TE110p working with mfcr2 , brazil variant,
everything looks great,but I can not go out of my calls.
When I try I receive the following log:
== Using SIP RTP CoS mark 5 -- Executing [33220567 at local:1]
Dial("SIP/4804-0000001a", "DAHDI/g11/33220567,,T") in new
stack == Everyone is busy/congested at this time (1:0/1/0) -- Auto
fallthrough, channel 'SIP/4804-0000001a' status is
'CONGESTION'****************************************************************************************This
is my dahdi show status:Digium Wildcard TE110P T1/E1 Card 0 REC 0
0 0 CAS HDB3 CRC4 0 db (CSU)/0-133 feet
(DSX-1)****************************************************************************************thi?s
my dahdi show channels:
asterisk*CLI> dahdi show channels Chan Extension Context Language
MOH Interpret Blocked State pseudo default
default In Service 1 4800 default
default In Service 2 4800 default
default In Service 3 4805 default
default In Service 4 default
default In Service 5 default
default In Service 6 default
default In Service 7 default
default In Service 8 default
default In Service 9 default
default In Service 10 default
default In Service 11 default
default In Service 12 default
default In Service 13 default
default In Service 14 default
default In Service 15 default
default In Service 17 default
default In Service 18 default
default In Service 19 default
default In Service 20 default
default In Service 21 default
default In Service 22 default
default In Service 23 default
default In Service 24 default
default In Service 25 default
default In Service 26 default
default In Service 27 default
default In Service 28 default
default In Service 29 default
default In Service 30 default
default In Service 31 default
default In Service
*************************************************************************************************In
my incoming call , the log is:
MFC/R2 call offered on chan 1. ANI = 1221341400, DNIS = 4804, Category =
National SubscriberNew MFC/R2 call detected on chan 2.
and don't ring nowhere!
Thanks for help!Att,
Flavio Roberto Miranda
MSN:flaviormiranda at hotmail.com
Skype: flaviormiranda
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20101021/6d528702/attachment.htm
Hi,
After some changes, the status now is:
== Using SIP RTP CoS mark 5 -- Executing [21341400 at local:1]
Dial("SIP/4804-00000000", "DAHDI/g11/21341400,,T") in new
stack == Everyone is busy/congested at this time (1:0/0/1) -- Auto
fallthrough, channel 'SIP/4804-00000000' status is
'CHANUNAVAIL'MFC/R2 call disconnected on channel 1
ThanksAtt,
Flavio Roberto Miranda
MSN:flaviormiranda at hotmail.com
Skype: flaviormiranda
From: flaviormiranda at hotmail.com
To: asterisk-users at lists.digium.com
Subject: Incoming calls
Date: Thu, 21 Oct 2010 17:59:35 -0200
Hi all,
After a lot of trouble with a TE110p working with mfcr2 , brazil variant,
everything looks great,but I can not go out of my calls.
When I try I receive the following log:
== Using SIP RTP CoS mark 5 -- Executing [33220567 at local:1]
Dial("SIP/4804-0000001a", "DAHDI/g11/33220567,,T") in new
stack == Everyone is busy/congested at this time (1:0/1/0) -- Auto
fallthrough, channel 'SIP/4804-0000001a' status is
'CONGESTION'****************************************************************************************This
is my dahdi show status:Digium Wildcard TE110P T1/E1 Card 0 REC 0
0 0 CAS HDB3 CRC4 0 db (CSU)/0-133 feet
(DSX-1)****************************************************************************************thi?s
my dahdi show channels:
asterisk*CLI> dahdi show channels Chan Extension Context Language
MOH Interpret Blocked State pseudo default
default In Service 1 4800 default
default In Service 2 4800 default
default In Service 3 4805 default
default In Service 4 default
default In Service 5 default
default In Service 6 default
default In Service 7 default
default In Service 8 default
default In Service 9 default
default In Service 10 default
default In Service 11 default
default In Service 12 default
default In Service 13 default
default In Service 14 default
default In Service 15 default
default In Service 17 default
default In Service 18 default
default In Service 19 default
default In Service 20 default
default In Service 21 default
default In Service 22 default
default In Service 23 default
default In Service 24 default
default In Service 25 default
default In Service 26 default
default In Service 27 default
default In Service 28 default
default In Service 29 default
default In Service 30 default
default In Service 31 default
default In Service
*************************************************************************************************In
my incoming call , the log is:
MFC/R2 call offered on chan 1. ANI = 1221341400, DNIS = 4804, Category =
National SubscriberNew MFC/R2 call detected on chan 2.
and don't ring nowhere!
Thanks for help!Att,
Flavio Roberto Miranda
MSN:flaviormiranda at hotmail.com
Skype: flaviormiranda
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20101021/cc9e691a/attachment.htm
Hi all, I'd like that each analog trunk of my TDM410p was received in different extension. So, in dahdi-channel.conf and chan-dahdi.conf I put each trunk in a different context and in my extensions.conf, under [default] I put such contexts and an especific estension to answer it. therefore, when I get call, it always is ringing on the first extensions, dont matter trunk . Anybody could teach me how can I organize that ? Att, Flavio Roberto Miranda MSN:flaviormiranda at hotmail.com Skype: flaviormiranda -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101118/defbe528/attachment.htm