Damian Turburville
2010-Oct-07 08:44 UTC
[asterisk-users] Fw: asterisk > cisco gateway > westell > isdx
Anyone?
----- Forwarded Message ----
Hi,
I am hoping someone can help me with a problem I am having.
I am trying to setup a connection from an Elastix 2 server to a Siemens isdx
PBX. The setup is as follows
Elastix 2
*sip trunk*
Cisco 2621XM router with 2 E1 voice interfaces
*QSIG*
Westell IQ2000 protocol convertor
*DPNSS*
Siemens ISDX
So the Elastix box has a SIP trunk to the cisco router which then talks QSIG to
the Westell which converts it to DPNSS to talk to the ISDX.
I have managed to make a call from a phone on Elastix to a phone on the ISDX but
it drops after about 3 seconds, every time. Would anyone have any idea why this
is?
Here is the setup I have on Elastix and the Cisco router
Elastix SIP trunk PEER details
type=friend
qualify=no
nat=no
insecure=very
host=10.132.41.13
dtmfmode=rfc2833
context=from-internal
canreinvite=yes
disallow=all
allow=ulaw
relevant Cisco config
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
boot-start-marker
boot-end-marker
!
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
no ip domain lookup
isdn switch-type primary-qsig
voice-card 1
!
!
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
bind control source-interface FastEthernet0/0
bind media source-interface FastEthernet0/0
!
!
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8 bytes 40
!
!
controller E1 1/0
!
controller E1 1/1
pri-group timeslots 1-31
!
!
class-map match-all FAX
description Match T.38 Fax
match access-group name FAX
!
interface FastEthernet0/0
ip address 10.132.41.13 255.255.255.0
no ip mroute-cache
speed 100
full-duplex
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
!
interface Serial1/1:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
no cdp enable
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.132.41.1
!
ip http server
!
control-plane
!
voice-port 1/1:15
!
!
dial-peer voice 786 voip
huntstop
destination-pattern 56...
progress_ind setup enable 3
voice-class codec 1
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad
!
dial-peer voice 2 pots
description QSIG Link to PABX via Westell
destination-pattern 2....
progress_ind setup enable 3
progress_ind alert enable 8
direct-inward-dial
port 1/1:15
forward-digits all
!
dial-peer voice 3 pots
description Featurenet 7xx routing
huntstop
destination-pattern 7T
progress_ind setup enable 3
progress_ind alert enable 8
incoming called-number 786....
no digit-strip
direct-inward-dial
forward-digits all
!
gateway
!
sip-ua
registrar ipv4:10.133.40.50 expires 3600
sip-server ipv4:10.133.40.50
Any help would be greatly appreciated
Thanks,
DT
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20101007/8c1c2c03/attachment.htm
-------------- next part --------------
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
http://www.asterisk.org/hello
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users