asterisk users - Jun 2010 - features.conf - parkedcalls - transfer

Hello dear list.


I am having issues on parkedcalls.

I am using a Cisco SPA525G as a test phone, and I have the transfer button there
when I am in a call,
But when I want to transfer the current call I am in, I push the transfer
button, and onscreen I se "Enter Number", and if I enter ex sip 200, I
have to wait
Almost 10 seconds, before the transfer to sip 200 is made, can I reduce that
timer?
And I can't see any button on the Cisco phone which will function like a
"direct transfer now", do I have to wait...?

And, secondly, is there a another way to do transfer/send to another sip phone?
Ex. Push *200 and the SIP phone will directly call SIP/200. Or push *401 and the
Sip phone will directly call SIP401?


Default features.conf context.


Thank you.


Med vennlig hilsen / Best regards
Abacus IT AS
- din Visma Software Partner
- your Visma Software Partner

Tor Aksel Celasun
Mobilnummer/cell phone: (+47) 900 15 103
Sentralbord/Support 4000 1850
aksel at abacus-it.no<mailto:aksel at abacus-it.no>

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20100621/a99184cd/attachment.htm

On Mon, Jun 21, 2010 at 2:27 AM, Aksel Celasun <aksel at abacus-it.no>
wrote:
>  I am using a Cisco SPA525G as a test phone, and I have the transfer
> button there when I am in a call,
>
> But when I want to transfer the current call I am in, I push the transfer
> button, and onscreen I se ?Enter Number?, and if I enter ex sip 200, I have
> to wait
>
> Almost 10 seconds, before the transfer to sip 200 is made, can I reduce
> that timer?
>
> And I can?t see any button on the Cisco phone which will function like a
> ?direct transfer now?, do I have to wait??
>
>
On the Cisco 79xx series phones, you would modify a config file called
dialplan.xml.  I think on the SPA5xx series you can configure this parameter
either in the main config file or from the web interface.  You need to look
for something like "dialplan" or "dial plans", etc.  This
controls the
timeout when entering digits.

-- 
Thanks,
--Warren Selby
http://www.selbytech.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20100621/8c97463c/attachment.htm

At 12:27 AM 6/21/2010, you wrote:
>Almost 10 seconds, before the transfer to sip 
>200 is made, can I reduce that timer?
>
>And I can?t see any button on the Cisco phone 
>which will function like a ?direct transfer now?, do I have to wait
?

On my Aastra phones, I press Transfer 101 
Transfer.  So you might just try hanging up or pressing transfer again.

Ira

2010/6/21 Aksel Celasun <aksel at abacus-it.no>
>  Hello dear list.
>
>
>
>
>
> I am having issues on parkedcalls.
>
>
>
> I am using a Cisco SPA525G as a test phone, and I have the transfer button
> there when I am in a call,
>
> But when I want to transfer the current call I am in, I push the transfer
> button, and onscreen I se ?Enter Number?, and if I enter ex sip 200, I have
> to wait
>
Don't you have an OK button somewhere available when dialing ?
To my knowledge, most SIP phone can both use a timer and a dedicated key to
send a dialed number.

Cheers
> Almost 10 seconds, before the transfer to sip 200 is made, can I reduce
> that timer?
>
> And I can?t see any button on the Cisco phone which will function like a
> ?direct transfer now?, do I have to wait??
>
>
>
> And, secondly, is there a another way to do transfer/send to another sip
> phone?
>
> Ex. Push *200 and the SIP phone will directly call SIP/200. Or push *401
> and the Sip phone will directly call SIP401?
>
>
>
>
>
> Default features.conf context.
>
>
>
>
>
> Thank you.
>
>
>
>
>
> Med vennlig hilsen / Best regards
>
> Abacus IT AS
>
> - din Visma Software Partner
>
> - your Visma Software Partner
>
>
>
> *Tor Aksel **Celasun*
>
> Mobilnummer/cell phone: (+47) 900 15 103
>
> Sentralbord/Support 4000 1850
>
> aksel at abacus-it.no
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20100622/601657f2/attachment.htm