hi,
you can lookup the causes in the sources....
check you dahdi-configuration (especially the groups...) is there
everything ok? what does dahdi_tools or the other cli-commands say, that
give you
information about the available channels?
yves
/* Causes for disconnection (from Q.931) */
#define AST_CAUSE_UNALLOCATED 1
#define AST_CAUSE_NO_ROUTE_TRANSIT_NET 2
#define AST_CAUSE_NO_ROUTE_DESTINATION 3
#define AST_CAUSE_CHANNEL_UNACCEPTABLE 6
#define AST_CAUSE_CALL_AWARDED_DELIVERED 7
#define AST_CAUSE_NORMAL_CLEARING 16
#define AST_CAUSE_USER_BUSY 17
#define AST_CAUSE_NO_USER_RESPONSE 18
#define AST_CAUSE_NO_ANSWER 19
#define AST_CAUSE_CALL_REJECTED 21
#define AST_CAUSE_NUMBER_CHANGED 22
#define AST_CAUSE_DESTINATION_OUT_OF_ORDER 27
#define AST_CAUSE_INVALID_NUMBER_FORMAT 28
#define AST_CAUSE_FACILITY_REJECTED 29
#define AST_CAUSE_RESPONSE_TO_STATUS_ENQUIRY 30
#define AST_CAUSE_NORMAL_UNSPECIFIED 31
#define AST_CAUSE_NORMAL_CIRCUIT_CONGESTION 34
#define AST_CAUSE_NETWORK_OUT_OF_ORDER 38
#define AST_CAUSE_NORMAL_TEMPORARY_FAILURE 41
#define AST_CAUSE_SWITCH_CONGESTION 42
#define AST_CAUSE_ACCESS_INFO_DISCARDED 43
#define AST_CAUSE_REQUESTED_CHAN_UNAVAIL 44
#define AST_CAUSE_PRE_EMPTED 45
#define AST_CAUSE_FACILITY_NOT_SUBSCRIBED 50
#define AST_CAUSE_OUTGOING_CALL_BARRED 52
#define AST_CAUSE_INCOMING_CALL_BARRED 54
#define AST_CAUSE_BEARERCAPABILITY_NOTAUTH 57
#define AST_CAUSE_BEARERCAPABILITY_NOTAVAIL 58
#define AST_CAUSE_BEARERCAPABILITY_NOTIMPL 65
#define AST_CAUSE_CHAN_NOT_IMPLEMENTED 66
#define AST_CAUSE_FACILITY_NOT_IMPLEMENTED 69
#define AST_CAUSE_INVALID_CALL_REFERENCE 81
#define AST_CAUSE_INCOMPATIBLE_DESTINATION 88
#define AST_CAUSE_INVALID_MSG_UNSPECIFIED 95
#define AST_CAUSE_MANDATORY_IE_MISSING 96
#define AST_CAUSE_MESSAGE_TYPE_NONEXIST 97
#define AST_CAUSE_WRONG_MESSAGE 98
#define AST_CAUSE_IE_NONEXIST 99
#define AST_CAUSE_INVALID_IE_CONTENTS 100
#define AST_CAUSE_WRONG_CALL_STATE 101
#define AST_CAUSE_RECOVERY_ON_TIMER_EXPIRE 102
#define AST_CAUSE_MANDATORY_IE_LENGTH_ERROR 103
#define AST_CAUSE_PROTOCOL_ERROR 111
#define AST_CAUSE_INTERWORKING 127
Richard Kenner schrieb:> What's this:
>
> -- Attempting call on DAHDI/g1/9<removed> for application Wait(5)
(Retry 1)
> -- Requested transfer capability: 0x00 - SPEECH
> -- Channel 0/2, span 1 got hangup, cause 44
> -- Forcing restart of channel 0/2 on span 1 since channel reported in
use
> -- Hungup 'DAHDI/2-1'
>
> Where can I look up "cause 44". And if this is the sort of
transient
> error that seems to be implied by the "Forcing restart" message,
why
> isn't it retried?
>
>