Eric Merkel (Mail Lists)
2010-Jan-21 20:40 UTC
[asterisk-users] pri CLI command not available
I am in the process of trying to terminate a PRI into a new * server. The server has an old T100P T1/PRI card in it. I have compiled the following on Centos 5.4. dahdi-linux-complete-2.2.1+2.2.1 libpri-1.4.10.2 asterisk-1.4.29 Everything seems to have compiled fine. DAHDI reports "Found a Wildcard: Digium Wildcard T100P T1/PRI" on bootup. Dahdi_tool shows that the span is up and active with no alarms however the phone company is not seeing the trunkgroup going into service. I was wanting to take a look at the PRI debugs but for some reason the CLI "pri" option is not available. I libpri compiled without any issues prior to compiling asterisk. What would cause the "pri debug" commands to not be available in the CLI? ==== Eric Merkel ejmerkel.lists at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100121/79cd98db/attachment.htm
Anthony Francis - Handy Networks LLC
2010-Jan-21 20:49 UTC
[asterisk-users] pri CLI command not available
This is often caused by the dahdi module not loading, check /var/log/asterisk/messages for the reason, or better yet, from the cli load the module manually and see the error in real time. If I had to guess I would say it is a configuration error. Thank you and have a nice day, Anthony Francis From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Merkel (Mail Lists) Sent: Thursday, January 21, 2010 1:41 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] pri CLI command not available I am in the process of trying to terminate a PRI into a new * server. The server has an old T100P T1/PRI card in it. I have compiled the following on Centos 5.4. dahdi-linux-complete-2.2.1+2.2.1 libpri-1.4.10.2 asterisk-1.4.29 Everything seems to have compiled fine. DAHDI reports "Found a Wildcard: Digium Wildcard T100P T1/PRI" on bootup. Dahdi_tool shows that the span is up and active with no alarms however the phone company is not seeing the trunkgroup going into service. I was wanting to take a look at the PRI debugs but for some reason the CLI "pri" option is not available. I libpri compiled without any issues prior to compiling asterisk. What would cause the "pri debug" commands to not be available in the CLI? ====Eric Merkel ejmerkel.lists at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100121/336daec3/attachment.htm