Hi; I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my endpoints. It seems that when I enable G729 on my peers in sip.conf and make a call I am getting the following errors: Called crp_uk/806575011971553141421 Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec translation path from g729 to ulaw Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type 256, while native formats is 4 (read/write = 4/4) Both my end points (Aastra phone) and my sip carrier support G729, so this should be simple pass-through. Snippet of my peer crp_uk: [crp_uk] disallow=all allow=ulaw allow=alaw allow=g729 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/923733ca/attachment.htm
Have you paied for and imported g729 licenses from digium so that asterisks can use g729? http://store.digium.com/productview.php?category_id=5&product_code=8G729 CODEC James Shigley Monroe Telephone Answering Service 409-981-9213 Infinity 5.51,UC 4.02.3803, Blink 3.0.104 Ecreator:2.21, eResponse 1.1.7 Webportal,WebApps, CONFIDENTIALITY NOTICE: This email, including any attachments, contains information which may be confidential or privileged. The information =is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this email in error, please notify the sender immediately by "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments. From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dovey Forman Sent: Friday, December 11, 2009 12:06 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] G729 Pass through Importance: High Hi; I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my endpoints. It seems that when I enable G729 on my peers in sip.conf and make a call I am getting the following errors: Called crp_uk/806575011971553141421 Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec translation path from g729 to ulaw Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type 256, while native formats is 4 (read/write = 4/4) Both my end points (Aastra phone) and my sip carrier support G729, so this should be simple pass-through. Snippet of my peer crp_uk: [crp_uk] disallow=all allow=ulaw allow=alaw allow=g729 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/6e6b7b48/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5478 bytes Desc: image001.jpg Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/6e6b7b48/attachment.jpeg
I have ? but I don?t see why that would be required for pass ? through? The codec purchase should only be required if I wanted to leave voicemail in G729 or MOH. If my end points support G729 and I am advertising it in the invite, and negotiating it with the 200OK, I don?t see why its not allowing pass through. --Dovey ------------------------------ *From:* asterisk-users-bounces at lists.digium.com [mailto: asterisk-users-bounces at lists.digium.com] *On Behalf Of *James A. Shigley *Sent:* Friday, December 11, 2009 1:16 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* Re: [asterisk-users] G729 Pass through Have you paied for and imported g729 licenses from digium so that asterisks can use g729? http://store.digium.com/productview.php?category_id=5&product_code=8G729CODEC James Shigley *Monroe** Telephone Answering Service* 409-981-9213** Infinity 5.51,UC 4.02.3803, Blink 3.0.104 Ecreator:2.21, eResponse 1.1.7 Webportal,WebApps, CONFIDENTIALITY NOTICE: This email, including any attachments, contains information which may be confidential or privileged. The information =is intended to be for the use of the individual or entity named above. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the contents of this information is prohibited. If you have received this email in error, please notify the sender immediately by "reply to sender only" message and destroy all electronic and hard copies of the communication, including attachments. [image: cid:image003.png at 01C9F268.65A4F5C0] *From:* asterisk-users-bounces at lists.digium.com [mailto: asterisk-users-bounces at lists.digium.com] *On Behalf Of *Dovey Forman *Sent:* Friday, December 11, 2009 12:06 PM *To:* Asterisk Users Mailing List - Non-Commercial Discussion *Subject:* [asterisk-users] G729 Pass through *Importance:* High Hi; I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my endpoints. It seems that when I enable G729 on my peers in sip.conf and make a call I am getting the following errors: Called crp_uk/806575011971553141421 Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec translation path from g729 to ulaw Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type 256, while native formats is 4 (read/write = 4/4) Both my end points (Aastra phone) and my sip carrier support G729, so this should be simple pass-through. Snippet of my peer crp_uk: [crp_uk] disallow=all allow=ulaw allow=alaw allow=g729 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/1f78dafe/attachment.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 5478 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20091211/1f78dafe/attachment.jpeg
Hi! Are you sure you are getting Astrisk out of the media path? I guess reinvite must be allowed. Then it should work without transcoding licenses. Maybe you should take a look at the SIP DEBUG info to see what codec Asterisk is trying to negotiate with the trunk. You could disallow alaw and ulaw for a test. Christian 2009/12/11 Dovey Forman <dovey.forman at idt.net>:> Hi; > > > > I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my > endpoints. > > > > It seems that when I enable G729 on my peers in sip.conf and make a call I > am getting the following errors: > > > > Called crp_uk/806575011971553141421 > > Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec translation > path from g729 to ulaw > > Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type 256, > while native formats is 4 (read/write = 4/4) > > > > Both my end points (Aastra phone) and my sip carrier support G729, so this > should be simple pass-through. > > > > Snippet of my peer crp_uk: > > > > [crp_uk] > > disallow=all > > allow=ulaw > > allow=alaw > > allow=g729 > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-users >
The SDP response is the IP of the Trixbox server. On Fri, Dec 11, 2009 at 1:38 PM, Christian Victor <christian at victormedia.de>wrote:> Hi! > > Are you sure you are getting Astrisk out of the media path? I guess > reinvite must be allowed. Then it should work without transcoding > licenses. > > Maybe you should take a look at the SIP DEBUG info to see what codec > Asterisk is trying to negotiate with the trunk. You could disallow > alaw and ulaw for a test. > > Christian > > 2009/12/11 Dovey Forman <dovey.forman at idt.net>: > > Hi; > > > > > > > > I am running Asterisk (Trix) 1.2.17 with Aastra 6731i phones as my > > endpoints. > > > > > > > > It seems that when I enable G729 on my peers in sip.conf and make a call > I > > am getting the following errors: > > > > > > > > Called crp_uk/806575011971553141421 > > > > Dec 11 07:57:10 WARNING[31903] channel.c: Unable to find a codec > translation > > path from g729 to ulaw > > > > Dec 11 07:57:10 WARNING[20633] chan_sip.c: Asked to transmit frame type > 256, > > while native formats is 4 (read/write = 4/4) > > > > > > > > Both my end points (Aastra phone) and my sip carrier support G729, so > this > > should be simple pass-through. > > > > > > > > Snippet of my peer crp_uk: > > > > > > > > [crp_uk] > > > > disallow=all > > > > allow=ulaw > > > > allow=alaw > > > > allow=g729 > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091214/ac3c7de1/attachment.htm