asterisk users - Oct 2009 - Asterisk 1.6 with TDM2400 and 2 FXS modules

----- "Eckhard Jokisch" <e.jokisch at orange-moon.de>
wrote:
> Hi,
> I set up my asterisk so it does dial out on DAHDI/1 which is on an FXS
> modul.
> But the phone that is attached to the line does nothing at all.
> asterisk-CLI shows a lot of 
>  -- DAHDI/1-1 is ringing
>  -- DAHDI/1-1 is ringing
>  -- DAHDI/1-1 is ringing
> 
> Even when I lift up the handset during (and no asterisk-activity) I do
> not get 
> the usual line tone.
> 
> CLI>dahdi show channel 1 gives:
> 
> 
> File Descriptor: 17
> Span: 1
> Extension:
> Dialing: no
> Context: DLPN_DialPlan1
> Caller ID: 4000
> Calling TON: 0
> Caller ID name: FXS 1
> Mailbox: 4000
> Destroy: 0
> InAlarm: 0
> Signalling Type: FXO Kewlstart
> Radio: 0
> Owner: <None>
> Real: <None>
> Callwait: <None>
> Threeway: <None>
> Confno: -1
> Propagated Conference: -1
> Real in conference: 0
> DSP: no
> Busy Detection: no
> TDD: no
> Relax DTMF: no
> Dialing/CallwaitCAS: 0/0
> Default law: ulaw
> Fax Handled: no
> Pulse phone: no
> DND: no
> Echo Cancellation:
>         128 taps
>         currently OFF
> Actual Confinfo: Num/0, Mode/0x0000
> Actual Confmute: No
> Hookstate (FXS only): Onhook
> 
> 
> 
> What am I missing?
> 
Is your cable from the port to the phone good?

Tim Nelson
Systems/Network Support
Rockbochs Inc.
(218)727-4332 x105