srinivas Antarvedi
2009-Aug-10 06:16 UTC
[asterisk-users] X100P FXO PCI card not receiving calls
Hello users, i have recently purchased Authentica x100p Fxo card for asterisk 1.4 i have following settings # /etc/zaptel.conf fxsks=1 loadzone=in defaultzone=in # /etc/asterisk/zapata.conf [channels] context=from-pstn usecallerid=no hidecallerid=yes immediate=no signalling=fxs_ks echocancel=yes channel => 1 #/etc/asterisk/extensions.conf [from-pstn] exten => s,1,Answer() exten => s,n,Playback(vm-intro) exten => s,n,Hangup() # lspci -vv 11:00.0 Communication controller: Motorola Wildcard X100P Subsystem: Efar Microsystems: Unknown device 0001 Flags: bus master, medium devsel, latency 32, IRQ 193 I/O ports at 2000 [size=256] Memory at ed100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 # cat /proc/interrupts CPU0 CPU1 0: 921447 931323 IO-APIC-edge timer 1: 5 5 IO-APIC-edge i8042 8: 0 1 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 12: 34 33 IO-APIC-edge i8042 14: 140339 90649 IO-APIC-edge ide0 15: 0 0 IO-APIC-edge libata 169: 38 25 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd 177: 0 0 IO-APIC-level uhci_hcd, uhci_hcd 185: 9688 9482 IO-APIC-level libata, ehci_hcd, uhci_hcd, uhci_hcd 193: 116 36 IO-APIC-level wcfxo 209: 15304 0 PCI-MSI eth0 NMI: 1 0 LOC: 1844122 1843838 ERR: 0 MIS: 0 #cat /proc/zaptel/1 Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER) 1 WCFXO/0/0 FXSKS (In use) i am unable to make incoming calls route to the asterisk. i didnt see anything in my asterisk CLI. can anybody advise?? Thanks in advance Srinivas Antarvedi -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090810/08f5a4e7/attachment.htm