I am having trouble with a DID on a PRI. If there is a call to that DID (let say 5551234) , the next calls get a busy signal. How to I go about sending the call to the next available channel ? Thanks! G. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090715/8a5ba5f7/attachment.htm
Gondar Monn wrote:> I am having trouble with a DID on a PRI. If there is a call to > that DID (let say 5551234) , the next calls get a busy signal. How to > I go about sending the call to the next available channel ? > Thanks! > > G. > >If the telco is providing the PRI then you need to tell them you want rollover on the PRI's. Otherwise, anybody calling across the PSTN to the DID number that is bound to the PRI channel is going to get a busy signal from the telco if that channel is in use.
Possibly Parallel Threads
- Incoming phone line rollover / hunt?
- Suggestions on how to create a hunt or hunt like (rollover, multi-line) group or where to get one?
- Advanced Ring All Hunt Group
- Asterisk: T1 hunt group setup
- After setting up my FXO card, what should I now order from my telco?