Hello,
I use asterisk as a PRI gateway between the PRI line from the telco
(span 1) and the customers PBX (span 2) . I did a "pri debug" because
I
had some problems with incoming routings.
>From the telco I get:
1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive
Dchan: 0
1 < ChanSel: Reserved
1 < Ext: 1 Coding: 0 Number Specified Channel Type:
3
1 < Ext: 1 Channel: 28 ]
But on span2 I asterisk sends:
2 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred
Dchan: 0
2 > Ext: 1 Coding: 0 Number Specified Channel Type:
3
2 > Ext: 1 Channel: 1 ]
I compared all parameters I know like TON (type of number) etc... and
they match. What I get on span 1 is the same that is sent on span 2
except this "Ext: 1 Channel: X". What does that parameter means and
how
can I modify it.
Best regards,
Lo?c Didelot.
--
Lo?c DIDELOT
MIXvoip S.a.
Tel: +352 20 3333 20
Fax: +352 20 3333 90
ldidelot at mixvoip.com
http://www.mixvoip.com