hi folks, i have a issue with my setup. i recently install xen in my server, and create several domu, but when i start a domU or i am working in it, my fxs in my tdm400p have noise. when i am calling from iax or sip extension trough the fxo there not noise, it just with the fxs port and domU working at same time i check for electrical problems and all its good. i have the following setup: software in DOM0: centos 5.2 kernel 2.6.18-53.1.19.el5xen asterisk 1.4.22-rc5 zaptel-1.4.11 xen-3.0.3-64.el5_2.3 hardware: tdm400p 1 fxs + 1 fxo -------- installed in DOM0 installed domUs: centos 5.2 kernel 2.6.18-92.1.17.el5xen FXS /etc/asterisk/zapata.conf -extract- ------------------------------------------------------------- [channels] context=from-pstn signalling=fxs_ks rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no faxdetect=incoming echotraining=800 rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 ------------------------------------------------------------- thanks Open Systems - innovate, create, enjoy ____________________________ jesuslee at gmail dot com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081110/a4e8b5db/attachment.htm