asterisk users - Oct 2008 - is there a way

hey;
i'm at best western and am curious is there a way i could find out if  
our best western, with out asking, is using asterisk?
oh and petsmart i think is using asterisk they have alason voice for  
there main voicem enu.
mike


thanks for reading
Systems administrator and owner of http://gwhosting.net
msn: messaging at audioficks.net
twitter: http://twitter.com/creepyblindy

Babcock, Michael Alex wrote:
> hey;
> i'm at best western and am curious is there a way i could find out if  
> our best western, with out asking, is using asterisk?
> oh and petsmart i think is using asterisk they have alason voice for  
> there main voicem enu.
> mike
>
>
> thanks for reading
> Systems administrator and owner of http://gwhosting.net
> msn: messaging at audioficks.net
> twitter: http://twitter.com/creepyblindy
>   
What does your sip.conf look like?The only way I could see this 
happening would be if the IP's or Identities were somehow getting 
crossed up.  Do your phones have static IP's or are they using DHCP?

-Brent

Steve Totaro wrote:
>My only wish is that Linux had a facility like XP to bridge NICs without
>running all sorts of commands for brctl.  Just a GUI like XP.  Last time I
>setup a bridge in Linux, I had to change many kernel options and rebuild the
>entire kernel to get bridging working properly.  With XP, you just select
>the NICS, right click and select add to bridge.
>For linux, I find that running firestarter, ICS/Firewall is fine, my end
>game is to get all of my traffic to go over an OpenVPN tunnel at my colo
>which is the default gateway over OpenVPN.  Windows seems to have the
>easiest method of getting this done.

I've taken to using Debian derivatives lately, so your YMMV, but maybe 
this is helpful to you...

I haven't had to rebuild any recent kernels for bridging.  I do have to 
apt-get bridge-utils, but that's a trivial thing I do on any box I 
install.  I also typically apt-get other userspace stuff like vlan, 
nmap, tcpdump and wireshark, etc.

I've been using the following type of code in /etc/network/interfaces to 
effect bridges.  When I want to bridge a tap device with openvpn, I do 
something similar to establish a bridge at boot time with only one 
physical ether attached.  Then I put the final brctl add into a script 
which is invoked via the up option line in the openvpn conf file.  Then 
it's all automatic.  I don't (yet) know how to do it on other distros.

The following fragment is used to connect to a redundant pair of 
asterisks for failover:

# bridge of two ethers for alternative paths to SIP clients
auto eth1
iface eth1 inet static
address 0.0.0.0
netmask 255.255.255.0

auto eth2
iface eth2 inet static
address 0.0.0.0
netmask 255.255.255.0

auto sipbr0
iface sipbr0 inet static
address 192.168.1.13
netmask 255.255.255.0
broadcast 192.168.1.255
network 192.168.1.0
bridge-ports eth1 eth2

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3234 bytes
Desc: S/MIME Cryptographic Signature
Url :
http://lists.digium.com/pipermail/asterisk-users/attachments/20081011/053dd71a/attachment.bin