On Thu, Sep 18, 2008 at 01:09:38PM -0400, Jason T. Nelson
wrote:> I have an Ubuntu 8 server running Asterisk 1.4 with three interface cards
in
> it:
>
> * Wildcard TDM400P
> * Wildcard TDM410P
> * Wildcard TE122
>
> I'm using zaptel 1.4.11, and the difficulty I'm running into is
that
> with EVERY reboot, the order in which the hardware appears changes. This
> makes ztscan cough up a different order for the spans, which makes it
nearly
> impossible to use the Digium GUI as after reboots, it complains that the
> hardware has changed. Is there a way to lock down probe order on boot, or
> somehow write zaptel.conf in such a way that port and span assignments
never
> change between reboots?
Those cards use each a different driver. Write those driver, in your
preffered order, in /etc/modules .
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.cohen at xorcom.com
+972-50-7952406 mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir