Hi ,
I have check zapte.conf in and after make some correction that problem
solve.
But now I am facing other problem. We are using here Postgres Database
and the data from CLI it can't insert in Postgres Database. I have also
here mention below cdr_pgsql.conf, modules.conf and cdr.conf
cdr.conf -- Below
[general]
[csv]
usegmtime=yes ;log date/time in GMT
loguniqueid=yes ;log uniqueid
loguserfield=yes ;log user field
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
cdr_pgsql.conf -- Below
[global]
hostname=localhost
;hostname=122.160.10.81
port=5432
dbname=asterisk
password=postgres
user=postgres
table=cdr
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
modules.conf -- Below
[modules]
autoload=yes
;preload => res_odbc.so
;preload => res_config_odbc.so
noload => pbx_gtkconsole.so
;load => pbx_gtkconsole.so
noload => pbx_kdeconsole.so
load => res_musiconhold.so
noload => chan_alsa.so
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OUTPUT on CLI --- Below
localhost*CLI> cdr status
CDR logging: enabled
CDR mode: simple
CDR registered backend: csv
CDR registered backend: cdr_manager
CDR registered backend: cdr-custom
localhost*CLI>
also when I load manually cdr_pgsql.so on CLI then it show error which
is also I describe below
localhost*CLI> module load cdr_pgsql.so
[Aug 29 10:22:21] WARNING[8984]: loader.c:362 load_dynamic_module: Error
loading module 'cdr_pgsql.so': libpq.so.5: cannot open shared object
file: No such file or directory
[Aug 29 10:22:21] WARNING[8984]: loader.c:614 load_resource: Module
'cdr_pgsql.so' could not be loaded.
So, Please guide me for load Postgres module in asterisk for CDR Database.
Subject:
Re: [asterisk-users] Asterisk CLI Show Error :- ("**Unknown**")
instead
of ("Zap/22-1", )
From:
"Max Alex" <max.asterisk at gmail.com>
Date:
Thu, 28 Aug 2008 11:48:16 +0530
To:
"Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Hi Hiren,
Have you properly configured the zap channels in asterisk,
which device have you configured in asterisk with zaptel?
let me know the dial plan for ivr.
Thanks,
Max Alex
Voip Developer
On Thu, Aug 28, 2008 at 11:40 AM, Hiren Mistry
<hiren.mistry at mobilefundas.com <mailto:hiren.mistry at
mobilefundas.com>>
wrote:
Hi, Everybody,
I am planning to make a new IVR on Asterisk I have Installed zaptel ,
libpri, asterisk, asterisk-addon on CentOS 5
I also start service of zaptel and asterisk it start successfully. But
when goto asterisk CLI> prompt and check this IVR then all call string
with ("**Unknown**") instead of ("Zap/22-1", ) and I have
also 3 other
Asterisk base IVR which is also on CentOS.
[Asterisk CLI> Executing [83301 at default:1]
Answer("**Unknown**", "") in
new stack ]
Please Help me for Configuring this IVR.
--
With Regards,
Hiren Mistry
--
With Regards,
Hiren Mistry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080829/00aff571/attachment.htm
Hi, let me know that you have configured properly in res_pgsql.conf in asterisk with proper, and it is connected properly to database with database details. Thanks, Max Alex Voip Developer On Fri, Aug 29, 2008 at 10:26 AM, Hiren Mistry < hiren.mistry at mobilefundas.com> wrote:> > Hi , > I have check zapte.conf in and after make some correction that problem > solve. > > But now I am facing other problem. We are using here Postgres Database and > the data from CLI it can't insert in Postgres Database. I have also here > mention below cdr_pgsql.conf, modules.conf and cdr.conf > > cdr.conf -- Below > [general] > > [csv] > usegmtime=yes ;log date/time in GMT > loguniqueid=yes ;log uniqueid > loguserfield=yes ;log user field > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > cdr_pgsql.conf -- Below > > [global] > hostname=localhost > ;hostname=122.160.10.81 > port=5432 > dbname=asterisk > password=postgres > user=postgres > table=cdr > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > modules.conf -- Below > > [modules] > autoload=yes > ;preload => res_odbc.so > ;preload => res_config_odbc.so > > noload => pbx_gtkconsole.so > ;load => pbx_gtkconsole.so > noload => pbx_kdeconsole.so > load => res_musiconhold.so > noload => chan_alsa.so > > > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > OUTPUT on CLI --- Below > localhost*CLI> cdr status > CDR logging: enabled > CDR mode: simple > CDR registered backend: csv > CDR registered backend: cdr_manager > CDR registered backend: cdr-custom > localhost*CLI> > > also when I load manually cdr_pgsql.so on CLI then it show error which is > also I describe below > localhost*CLI> module load cdr_pgsql.so > [Aug 29 10:22:21] WARNING[8984]: loader.c:362 load_dynamic_module: Error > loading module 'cdr_pgsql.so': libpq.so.5: cannot open shared object file: > No such file or directory > [Aug 29 10:22:21] WARNING[8984]: loader.c:614 load_resource: Module > 'cdr_pgsql.so' could not be loaded. > > > So, Please guide me for load Postgres module in asterisk for CDR Database. > > Subject: > Re: [asterisk-users] Asterisk CLI Show Error :- ("**Unknown**") instead of > ("Zap/22-1", ) From: > "Max Alex" <max.asterisk at gmail.com> <max.asterisk at gmail.com> Date: > Thu, 28 Aug 2008 11:48:16 +0530 To: > "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users at lists.digium.com> <asterisk-users at lists.digium.com> > Hi Hiren, > Have you properly configured the zap channels in asterisk, > which device have you configured in asterisk with zaptel? > > let me know the dial plan for ivr. > > Thanks, > Max Alex > Voip Developer > > > > On Thu, Aug 28, 2008 at 11:40 AM, Hiren Mistry < > hiren.mistry at mobilefundas.com> wrote: > > Hi, Everybody, > > I am planning to make a new IVR on Asterisk I have Installed zaptel , > libpri, asterisk, asterisk-addon on CentOS 5 > I also start service of zaptel and asterisk it start successfully. But > when goto asterisk CLI> prompt and check this IVR then all call string > with ("**Unknown**") instead of ("Zap/22-1", ) and I have also 3 other > Asterisk base IVR which is also on CentOS. > [Asterisk CLI> Executing [83301 at default:1] Answer("**Unknown**", "") in > new stack ] > > Please Help me for Configuring this IVR. > > -- > With Regards, > Hiren Mistry > > > > -- > With Regards, > Hiren Mistry > >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080830/176119e6/attachment-0001.htm
On Fri, 2008-08-29 at 10:26 +0530, Hiren Mistry wrote:> > Hi , > I have check zapte.conf in and after make some correction that problem > solve. > > But now I am facing other problem. We are using here Postgres Database > and the data from CLI it can't insert in Postgres Database. I have > also here mention below cdr_pgsql.conf, modules.conf and cdr.conf > > cdr.conf -- Below > [general] > > [csv] > usegmtime=yes ;log date/time in GMT > loguniqueid=yes ;log uniqueid > loguserfield=yes ;log user field > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > cdr_pgsql.conf -- Below > > [global] > hostname=localhost > ;hostname=122.160.10.81 > port=5432 > dbname=asterisk > password=postgres > user=postgres > table=cdr > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > modules.conf -- Below > > [modules] > autoload=yes > ;preload => res_odbc.so > ;preload => res_config_odbc.so > > noload => pbx_gtkconsole.so > ;load => pbx_gtkconsole.so > noload => pbx_kdeconsole.so > load => res_musiconhold.so > noload => chan_alsa.so > > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > OUTPUT on CLI --- Below > localhost*CLI> cdr status > CDR logging: enabled > CDR mode: simple > CDR registered backend: csv > CDR registered backend: cdr_manager > CDR registered backend: cdr-custom > localhost*CLI> > > also when I load manually cdr_pgsql.so on CLI then it show error which > is also I describe below > localhost*CLI> module load cdr_pgsql.so > [Aug 29 10:22:21] WARNING[8984]: loader.c:362 load_dynamic_module: > Error loading module 'cdr_pgsql.so': libpq.so.5: cannot open shared > object file: No such file or directory > [Aug 29 10:22:21] WARNING[8984]: loader.c:614 load_resource: Module > 'cdr_pgsql.so' could not be loaded. >The above is the key to you getting Asterisk to use the pgsql backend. You need to supply the libpq.so. See if your version of linux has a libpq or pgsql-devel or whatever package that will supply this, and install it. murf> > So, Please guide me for load Postgres module in asterisk for CDR > Database. > > Subject: Re: [asterisk-users] Asterisk CLI Show Error :- > ("**Unknown**") instead of ("Zap/22-1", ) > From: "Max Alex" <max.asterisk at gmail.com> > Date: Thu, 28 Aug 2008 11:48:16 +0530 > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users at lists.digium.com> > > Hi Hiren, > Have you properly configured the zap channels in asterisk, > which device have you configured in asterisk with zaptel? > > let me know the dial plan for ivr. > > Thanks, > Max Alex > Voip Developer > > > > On Thu, Aug 28, 2008 at 11:40 AM, Hiren Mistry > <hiren.mistry at mobilefundas.com> wrote: > > Hi, Everybody, > > I am planning to make a new IVR on Asterisk I have Installed zaptel , > libpri, asterisk, asterisk-addon on CentOS 5 > I also start service of zaptel and asterisk it start successfully. But > when goto asterisk CLI> prompt and check this IVR then all call string > with ("**Unknown**") instead of ("Zap/22-1", ) and I have also 3 other > Asterisk base IVR which is also on CentOS. > [Asterisk CLI> Executing [83301 at default:1] Answer("**Unknown**", "") > in > new stack ] > > Please Help me for Configuring this IVR. > > -- > With Regards, > Hiren Mistry > > > > -- > With Regards, > Hiren Mistry > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users-- Steve Murphy Software Developer Digium -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3227 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20080902/ca360a43/attachment.bin