asterisk users - Aug 2008 - Help with Asterisk to Huawei SoftX3000 registry problem

Hello Asterisk People,

I am having trouble connecting asterisk to a huawei SoftX3000 Switch, i 
can succesfully connect other softphones like Zoiper, but when it comes 
to Asterisk SIP Client, the system doesn't authenticate, i have the 
following configuration:

peer: 10.220.0.2
username: 4857768
password: 4857768

the configuration is as follows:

in the general section:

register => 4857768:4857768 at epmbog

in the sip client / peers section:

[epmbog]
type=peer
host=10.220.0.2
secret=4857768
username=4857768
canreinvite=no

[Aug 19 06:48:28] NOTICE[7608]: chan_sip.c:12525 
handle_response_register: Failed to authenticate on REGISTER to 
'4857768 at epmbog' (Tries 3)

i have tested numerous variants, but the huawei refuse to authenticate 
the asterisk.

i attache the logs producted with Zoiper, and the one produced with 
Asterisk.

Any help will be greatly apreciated.

Thanks.

-- 
Nestor A. Diaz
Ingeniero de Sistemas
Tel. +57 1-600-5490 x 211
Cel. +57 316-227-3593
Tel. SIP: sip:211 at tiendalinux.com
Email/MSN: nestor at tiendalinux.com
http://www.tiendalinux.com/
Bogota, Colombia 

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: registry-zopier.txt
Url:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080819/3b23dd25/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: registry-asterisk.txt
Url:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080819/3b23dd25/attachment-0001.txt

Nestor A. Diaz schrieb:
> I am having trouble connecting asterisk to a huawei SoftX3000 Switch, i 
> can succesfully connect other softphones like Zoiper, but when it comes 
> to Asterisk SIP Client, the system doesn't authenticate, i have the 
> following configuration:
[...]
> i attache the logs producted with Zoiper, and the one produced with 
> Asterisk.
Did you enable pedantic=yes in sip.conf?

Gr??e,
Philipp Kempgen
-- 
http://www.das-asterisk-buch.de  -  http://www.the-asterisk-book.com
Amooma GmbH - Bachstr. 126 - 56566 Neuwied  ->  http://www.amooma.de
Gesch?ftsf?hrer: Stefan Wintermeyer, Handelsregister: Neuwied B14998

Philipp Kempgen wrote:
> Did you enable pedantic=yes in sip.conf?
>   
thank you very much for your help, it fix the problem.

Is there any other issue that i have to take in mind for placing calls ? 
is there any option for set up pedantic for selected peers ? i use 
broadvoice too and it requires pedantic=no on the configuration: 
http://www.broadvoice.com/support_install_asterisk.html , how can 
coexist this two peers on just one asterisk ?

[general]
context=from-sip                ; Default context for incoming calls
allowguest=no                   ; Allow or reject guest calls (default 
is yes)
allowoverlap=no                 ; Disable overlap dialing support. 
(Default is yes)
bindport=5060                   ; UDP Port to bind to (SIP standard port 
is 5060)
bindaddr=0.0.0.0                ; IP address to bind to (0.0.0.0 binds 
to all)
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls

pedantic=yes                    ; Enable checking of tags in headers,

language=es                     ; Default language setting for all 
users/peers
dtmfmode = rfc2833              ; Set default dtmfmode for sending DTMF. 
Default: rfc2833

rtptimeout=60                   ; Terminate call if 60 seconds of no RTP 
or RTCP activity
rtpholdtimeout=300              ; Terminate call if 300 seconds of no 
RTP or RTCP activity

limitonpeers = yes              ; Apply call limits on peers only. This 
will improve



#include custom.d/sip_general.conf

[authentication]

#include custom.d/sip.conf



-- 
Nestor A. Diaz
Ingeniero de Sistemas
Tel. +57 1-600-5490 x 211
Cel. +57 316-227-3593
Tel. SIP: sip:211 at tiendalinux.com
Email/MSN: nestor at tiendalinux.com
http://www.tiendalinux.com/
Bogota, Colombia