Hi I am using centos 4.6 on an ebox 4300. Everything seems to be working except the /proc/interrupts rtc is always constant. On other machines the rtc (which ztdummy uses) is always incrementing. the uhci_hcd and ehci_hcd are both running. What dont I have right on the system so rtc increments? Thanks, Jerry -------------- 0: 274276 IO-APIC-edge timer 1: 9 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 2 IO-APIC-edge rtc 145: 5522 IO-APIC-level eth0 153: 10279 IO-APIC-level HDA Intel 161: 0 IO-APIC-level uhci_hcd 169: 0 IO-APIC-level uhci_hcd 177: 17491 IO-APIC-level ehci_hcd NMI: 0 LOC: 274158 ERR: 0 MIS: 0 lspci shows lspci 00:00.0 Host bridge: VIA Technologies, Inc. CX700 Host Bridge (rev 10) 00:00.1 Host bridge: VIA Technologies, Inc. CX700 Host Bridge 00:00.2 Host bridge: VIA Technologies, Inc. CX700 Host Bridge 00:00.3 Host bridge: VIA Technologies, Inc. CX700 Host Bridge 00:00.4 Host bridge: VIA Technologies, Inc. CX700 Host Bridge 00:00.7 Host bridge: VIA Technologies, Inc. CX700 Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 90) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) 00:11.0 ISA bridge: VIA Technologies, Inc. CX700 PCI to ISA Bridge 00:11.7 Host bridge: VIA Technologies, Inc. CX700 Internal Module Bus 00:13.0 PCI bridge: VIA Technologies, Inc. CX700 Host Bridge 01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700M2 UniChrome PRO II Graphics (rev 03) 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10) lsmod shows lsmod Module Size Used by md5 4161 1 ipv6 236929 10 autofs4 30405 0 sunrpc 163237 1 ztdummy 4180 0 zaptel 203268 3 ztdummy crc_ccitt 2241 1 zaptel ipt_REJECT 6721 1 ipt_state 1985 26 ip_conntrack 41077 1 ipt_state iptable_filter 3009 1 ip_tables 17601 3 ipt_REJECT,ipt_state,iptable_filter dm_mirror 31045 0 dm_mod 67577 1 dm_mirror uhci_hcd 31705 0 snd_hda_intel 347644 4 snd_pcm_oss 44456 0 snd_mixer_oss 19072 1 snd_pcm_oss snd_pcm 82824 4 snd_hda_intel,snd_pcm_oss snd_timer 30724 3 snd_pcm snd_page_alloc 11528 2 snd_hda_intel,snd_pcm snd_hwdep 10884 1 snd_hda_intel snd 70276 10 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 10017 1 snd 8139too 26177 0 mii 5313 1 8139too ehci_hcd 31429 0 usb_storage 60937 2 ext3 118217 1 jbd 72665 1 ext3 ata_piix 15173 0 libata 111645 1 ata_piix sd_mod 17345 3 scsi_mod 125901 3 usb_storage,libata,sd_mod
Jerry Geis wrote:> Hi > > I am using centos 4.6 on an ebox 4300. Everything seems to be working > except the > /proc/interrupts rtc is always constant. On other machines the rtc > (which ztdummy uses) is always incrementing. > the uhci_hcd and ehci_hcd are both running. > > What dont I have right on the system so rtc increments? > > Thanks, > > Jerry > -------------- > > 0: 274276 IO-APIC-edge timer > 1: 9 IO-APIC-edge i8042 > 2: 0 XT-PIC cascade > 8: 2 IO-APIC-edge rtc > 145: 5522 IO-APIC-level eth0 > 153: 10279 IO-APIC-level HDA Intel > 161: 0 IO-APIC-level uhci_hcd > 169: 0 IO-APIC-level uhci_hcd > 177: 17491 IO-APIC-level ehci_hcd > NMI: 0 > LOC: 274158 > ERR: 0 > MIS: 0 > > lspci shows > lspci > 00:00.0 Host bridge: VIA Technologies, Inc. CX700 Host Bridge (rev 10) > 00:00.1 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > 00:00.2 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > 00:00.3 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > 00:00.4 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > 00:00.7 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge > 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 90) > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller (rev 90) > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) > 00:11.0 ISA bridge: VIA Technologies, Inc. CX700 PCI to ISA Bridge > 00:11.7 Host bridge: VIA Technologies, Inc. CX700 Internal Module Bus > 00:13.0 PCI bridge: VIA Technologies, Inc. CX700 Host Bridge > 01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700M2 > UniChrome PRO II Graphics (rev 03) > 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio > Controller (rev 10) > > lsmod shows > lsmod > Module Size Used by > md5 4161 1 > ipv6 236929 10 > autofs4 30405 0 > sunrpc 163237 1 > ztdummy 4180 0 > zaptel 203268 3 ztdummy > crc_ccitt 2241 1 zaptel > ipt_REJECT 6721 1 > ipt_state 1985 26 > ip_conntrack 41077 1 ipt_state > iptable_filter 3009 1 > ip_tables 17601 3 ipt_REJECT,ipt_state,iptable_filter > dm_mirror 31045 0 > dm_mod 67577 1 dm_mirror > uhci_hcd 31705 0 > snd_hda_intel 347644 4 > snd_pcm_oss 44456 0 > snd_mixer_oss 19072 1 snd_pcm_oss > snd_pcm 82824 4 snd_hda_intel,snd_pcm_oss > snd_timer 30724 3 snd_pcm > snd_page_alloc 11528 2 snd_hda_intel,snd_pcm > snd_hwdep 10884 1 snd_hda_intel > snd 70276 10 > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep > soundcore 10017 1 snd > 8139too 26177 0 > mii 5313 1 8139too > ehci_hcd 31429 0 > usb_storage 60937 2 > ext3 118217 1 > jbd 72665 1 ext3 > ata_piix 15173 0 > libata 111645 1 ata_piix > sd_mod 17345 3 > scsi_mod 125901 3 usb_storage,libata,sd_mod > >I stopped everything and reloaded "modprobe ztdummy debug=1" and all I have from dmesg is : ztdummy: init() finished it has been 10 minutes. I so nothing else logged. It is supposed to log every 5 seconds. How can I get ztdummy working with rtc correctly. my cpuinfo is more /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 13 model name : VIA Eden Processor 500MHz stepping : 0 cpu MHz : 499.027 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge cmov pat clflush acpi mmx fxsr sse sse2 tm nx pni est tm2 xtpr rng rng_en ace ace_en bogomips : 998.94 Thanks, Jerry
On Wed, Aug 13, 2008 at 04:54:12PM -0400, Jerry Geis wrote:> Jerry Geis wrote: > > Hi > > > > I am using centos 4.6 on an ebox 4300. Everything seems to be working > > except the > > /proc/interrupts rtc is always constant. On other machines the rtc > > (which ztdummy uses) is always incrementing. > > the uhci_hcd and ehci_hcd are both running. > > > > What dont I have right on the system so rtc increments? > > > > Thanks, > > > > Jerry > > -------------- > > > > 0: 274276 IO-APIC-edge timer > > 1: 9 IO-APIC-edge i8042 > > 2: 0 XT-PIC cascade > > 8: 2 IO-APIC-edge rtc > > 145: 5522 IO-APIC-level eth0 > > 153: 10279 IO-APIC-level HDA Intel > > 161: 0 IO-APIC-level uhci_hcd > > 169: 0 IO-APIC-level uhci_hcd > > 177: 17491 IO-APIC-level ehci_hcd > > NMI: 0 > > LOC: 274158 > > ERR: 0 > > MIS: 0 > > > > lspci shows > > lspci > > 00:00.0 Host bridge: VIA Technologies, Inc. CX700 Host Bridge (rev 10) > > 00:00.1 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > > 00:00.2 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > > 00:00.3 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > > 00:00.4 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > > 00:00.7 Host bridge: VIA Technologies, Inc. CX700 Host Bridge > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge > > 00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > > RTL-8139/8139C/8139C+ (rev 10) > > 00:0f.0 IDE interface: VIA Technologies, Inc. CX700M2 IDE > > 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller (rev 90) > > 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > > Controller (rev 90) > > 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90) > > 00:11.0 ISA bridge: VIA Technologies, Inc. CX700 PCI to ISA Bridge > > 00:11.7 Host bridge: VIA Technologies, Inc. CX700 Internal Module Bus > > 00:13.0 PCI bridge: VIA Technologies, Inc. CX700 Host Bridge > > 01:00.0 VGA compatible controller: VIA Technologies, Inc. CX700M2 > > UniChrome PRO II Graphics (rev 03) > > 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio > > Controller (rev 10) > > > > lsmod shows > > lsmod > > Module Size Used by > > md5 4161 1 > > ipv6 236929 10 > > autofs4 30405 0 > > sunrpc 163237 1 > > ztdummy 4180 0 > > zaptel 203268 3 ztdummy > > crc_ccitt 2241 1 zaptel > > ipt_REJECT 6721 1 > > ipt_state 1985 26 > > ip_conntrack 41077 1 ipt_state > > iptable_filter 3009 1 > > ip_tables 17601 3 ipt_REJECT,ipt_state,iptable_filter > > dm_mirror 31045 0 > > dm_mod 67577 1 dm_mirror > > uhci_hcd 31705 0 > > snd_hda_intel 347644 4 > > snd_pcm_oss 44456 0 > > snd_mixer_oss 19072 1 snd_pcm_oss > > snd_pcm 82824 4 snd_hda_intel,snd_pcm_oss > > snd_timer 30724 3 snd_pcm > > snd_page_alloc 11528 2 snd_hda_intel,snd_pcm > > snd_hwdep 10884 1 snd_hda_intel > > snd 70276 10 > > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep > > soundcore 10017 1 snd > > 8139too 26177 0 > > mii 5313 1 8139too > > ehci_hcd 31429 0 > > usb_storage 60937 2 > > ext3 118217 1 > > jbd 72665 1 ext3 > > ata_piix 15173 0 > > libata 111645 1 ata_piix > > sd_mod 17345 3 > > scsi_mod 125901 3 usb_storage,libata,sd_mod > > > > > I stopped everything and reloaded "modprobe ztdummy debug=1" > and all I have from dmesg is : > ztdummy: init() finishedWhat is the output of: zttest -c 6 -v -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir