Any ideas, please they are highly appreciated....
--- On Mon, 8/4/08, Jay Ray <jonty_11 at yahoo.com> wrote:
From: Jay Ray <jonty_11 at yahoo.com>
Subject: [asterisk-users] FC2 and Zaptel
To: asterisk-users at lists.digium.com
Date: Monday, August 4, 2008, 12:02 AM
Hi,
?I am using an older Fedora - FC2 and trying to install zaptel.(for X100P card I
have - FXO with one line port and one Phone port)
Fist I tried installin from RPM...as given here (also tried installing Zapata)
http://www.voip-info.org/wiki/view/Asterisk+Linux+Fedora (FC2 is at the end)
But looks like zaptel executable was not there...same for zapata...
Then I started on downloading the source, I successfully completed MAKE for
zaptel...but make install has following error...Full o/p follows:
========================================================[root at fedoracore2uk
zaptel]# make install
make[1]: Entering directory `/usr/src/zaptel'
make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386
SUBDIRS=/usr/src/zaptel/kernel HOTPLUG_FIRMWARE=yes
KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o wct1xxp.o wctdm.o
wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o ztdynamic.o
zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/" modules
make[2]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build'
? Building modules, stage 2.
? MODPOST
*** Warning: "class_device_destroy" [/usr/src/zaptel/kernel/zaptel.ko]
undefined!
make[2]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build'
make[2]: Entering directory `/usr/src/zaptel/kernel/xpp/utils'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils'
make[1]: Leaving directory `/usr/src/zaptel'
install -d /etc/udev/rules.d
build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules
build_tools/uninstall-modules dahdi 2.6.10-1.771_FC2
make -C /lib/modules/2.6.10-1.771_FC2/build ARCH=i386
SUBDIRS=/usr/src/zaptel/kernel
HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="pciradio.o tor2.o torisa.o wcfxo.o
wct1xxp.o wctdm.o wcte11xp.o wcusb.o zaptel.o ztd-eth.o ztd-loc.o ztdummy.o
ztdynamic.o zttranscode.o wct4xxp/ wctc4xxp/ xpp/ wctdm24xxp/ wcte12xp/"
INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install
make[1]: Entering directory `/lib/modules/2.6.10-1.771_FC2/build'
? INSTALL /usr/src/zaptel/kernel/pciradio.ko
? INSTALL /usr/src/zaptel/kernel/tor2.ko
? INSTALL /usr/src/zaptel/kernel/torisa.ko
? INSTALL /usr/src/zaptel/kernel/wcfxo.ko
? INSTALL /usr/src/zaptel/kernel/wct1xxp.ko
? INSTALL /usr/src/zaptel/kernel/wct4xxp/wct4xxp.ko
? INSTALL /usr/src/zaptel/kernel/wctc4xxp/wctc4xxp.ko
? INSTALL /usr/src/zaptel/kernel/wctdm.ko
? INSTALL /usr/src/zaptel/kernel/wctdm24xxp/wctdm24xxp.ko
? INSTALL /usr/src/zaptel/kernel/wcte11xp.ko
? INSTALL /usr/src/zaptel/kernel/wcte12xp/wcte12xp.ko
?
INSTALL /usr/src/zaptel/kernel/wcusb.ko
? INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxo.ko
? INSTALL /usr/src/zaptel/kernel/xpp/xpd_fxs.ko
? INSTALL /usr/src/zaptel/kernel/xpp/xpd_pri.ko
? INSTALL /usr/src/zaptel/kernel/xpp/xpp.ko
? INSTALL /usr/src/zaptel/kernel/xpp/xpp_usb.ko
? INSTALL /usr/src/zaptel/kernel/zaptel.ko
? INSTALL /usr/src/zaptel/kernel/ztd-eth.ko
? INSTALL /usr/src/zaptel/kernel/ztd-loc.ko
? INSTALL /usr/src/zaptel/kernel/ztdummy.ko
? INSTALL /usr/src/zaptel/kernel/ztdynamic.ko
? INSTALL /usr/src/zaptel/kernel/zttranscode.ko
make[1]: Leaving directory `/lib/modules/2.6.10-1.771_FC2/build'
[ `id -u` = 0 ] && /sbin/depmod -a 2.6.10-1.771_FC2 || :
make[1]: Entering directory `/usr/src/zaptel/kernel/xpp/utils'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils'
make[1]: Entering
directory `/usr/src/zaptel/kernel/xpp/utils'
install -d /usr/sbin
install genzaptelconf fpga_load zt_registration xpp_sync lszaptel xpp_blink
zapconf zaptel_hardware? /usr/sbin/
install -d /usr/share/zaptel
install -m 644 ../firmwares/FPGA_1141.hex ../firmwares/FPGA_1151.hex
../firmwares/FPGA_FXS.hex ../firmwares/USB_FW.hex init_fxo_modes
/usr/share/zaptel/
install ../init_card_1_30 ../init_card_2_30 ../init_card_3_30 ../init_card_4_30
xpp_fxloader /usr/share/zaptel/
install -d /usr/share/man/man8
install -m 644 genzaptelconf.8 fpga_load.8 zt_registration.8 xpp_sync.8
lszaptel.8 xpp_blink.8 zapconf.8 zaptel_hardware.8 /usr/share/man/man8/
install -d /etc/hotplug/usb
install -m 644 xpp_fxloader.usermap /etc/hotplug/usb/
# for backward compatibility and for hotplug users:
ln -sf /usr/share/zaptel/xpp_fxloader /etc/hotplug/usb/
install -d /etc/udev/rules.d
install -m 644 xpp.rules /etc/udev/rules.d/
install -d
/usr/lib/perl5/site_perl/5.8.3
for i in Zaptel Zaptel/Xpp Zaptel/Config Zaptel/Hardware; \
do \
??????? install -d "/usr/lib/perl5/site_perl/5.8.3/$i"; \
done
for i in Zaptel.pm Zaptel/Chans.pm Zaptel/Hardware.pm Zaptel/Span.pm
Zaptel/Utils.pm Zaptel/Xpp.pm Zaptel/Xpp/Line.pm Zaptel/Xpp/Xbus.pm
Zaptel/Xpp/Xpd.pm Zaptel/Config/Defaults.pm Zaptel/Hardware/PCI.pm
Zaptel/Hardware/USB.pm; \
do \
??????? install -m 644 "zconf/$i"
"/usr/lib/perl5/site_perl/5.8.3/$i"; \
done
make[1]: Leaving directory `/usr/src/zaptel/kernel/xpp/utils'
install -d /sbin
install? fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/
install -d /usr/share/man/man8
install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8
doc/zttest.8 doc/ztscan.8 doc/zttool.8 /usr/share/man/man8/
/usr/bin/install -c -D -m 755 libtonezone.a
/usr/lib/libtonezone.a
/usr/bin/install -c -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0
if [ `id -u` = 0 ]; then \
??????? /sbin/ldconfig || : ;\
fi
rm -f /usr/liblibtonezone.so
/bin/ln -sf libtonezone.so.1.0 \
??????? /usr/lib/libtonezone.so.1
/bin/ln -sf libtonezone.so.1.0 \
??????? /usr/lib/libtonezone.so
/sbin/restorecon -v /usr/lib/libtonezone.so
/usr/bin/install -c -D -m 644 kernel/zaptel.h /usr/include/zaptel/zaptel.h
/usr/bin/install -c -D -m 644 tonezone.h /usr/include/zaptel/tonezone.h
make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes
make[1]: Entering directory `/usr/src/zaptel/firmware'
make[1]: *** No rule to make target `zaptel-fw-oct6114-128-1.05.01.tar.gz',
needed by `hotplug-install'.? Stop.
make[1]: Leaving directory `/usr/src/zaptel/firmware'
make: ***
[install-firmware] Error 2
You have new mail in /var/spool/mail/root
=============================================================
Any ideas would be appreciated on how to fix this....
Thx,
Jay
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080812/247cd2ce/attachment.htm