Hi There, Has anyone managed to get 2 AVM ISDN Fritzcard's working in with a 2.6 kernel system? Simon
Simon wrote:> Hi There, > > Has anyone managed to get 2 AVM ISDN Fritzcard's working in with a 2.6 > kernel system? >Yes, with Suse 10.2/10.3 and chan_misdn. /usr/sbin/misdn-init config wrote this:- # # Configuration file for your misdn hardware # # Usage: /usr/sbin/misdn-init start|stop|restart|config|scan|help # # # Card Settings # # Syntax: card=<number>,<type>[,<option>...] # # <number> count your cards beginning with 1 # <type> either 0x1,0x4 or 0x8 for your hfcmulti hardware, # or the name of your card driver module. # <option> ulaw - uLaw (instead of aLaw) # dtmf - enable DTMF detection on all B-channels # # pcm_slave - set PCM bus into slave mode # If you have a set of cards, all wired via # card=1,avmfritz card=2,avmfritz # # Port settings # # Syntax: <port_type>=<port_number>[,<port_number>...] # # <port_type> te_ptp - TE-Mode, PTP # te_ptmp - TE-Mode, PTMP # te_capi_ptp - TE-Mode (capi), PTP # te_capi_ptmp - TE-Mode (capi), PTMP # nt_ptp - NT-Mode, PTP # nt_ptmp - NT-Mode, PTMP # <port_number> port that should be considered # te_ptmp=1,2 DC
On Thu, Jul 3, 2008 at 5:07 PM, Dave Cotton <dcotton at linuxautrement.com> wrote:> Yes, with Suse 10.2/10.3 and chan_misdn.Just to follow up on this. SLES 10.2 SP2 worked bang on. The two cards are configured and working correctly and recognised by Asterisk. Question: I guess you were meaning openSUSE 10.2/10.3... will openSUSE 11 work here? Simon
Perhaps you could try the OpenSUSE LiveCD and find out. -Mark Best -Network Administrator -markbest at co.nezperce.id.us -(208) 750-2054 ________________________ This communication is the property of Nez Perce County and may contain confidential or privileged information. The information contained in this communication is intended only for the personal and confidential use of the recipient(s) named above. Distribution, publication, or retransmission of this message is strictly prohibited. If the reader of this message is not the intended recipient or an agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. Please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Simon Sent: Friday, July 04, 2008 7:24 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 2 AVM ISDN Fritzcards On Thu, Jul 3, 2008 at 5:07 PM, Dave Cotton <dcotton at linuxautrement.com> wrote:> Yes, with Suse 10.2/10.3 and chan_misdn.Just to follow up on this. SLES 10.2 SP2 worked bang on. The two cards are configured and working correctly and recognised by Asterisk. Question: I guess you were meaning openSUSE 10.2/10.3... will openSUSE 11 work here? Simon _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users