Hi all, How can i use different VLANs for signaling and audio, e.g vlan 100 for sip and vlan 200 for rtp? Where can i find documentations for this? Comments and suggestions are welcomed (a sample config too :-))) thx in advance rich -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080630/5a1e4dfe/attachment.htm
Hi! Coco Richard wrote:> How can i use different VLANs for signaling and audio, e.g vlan 100 for sip > and vlan 200 for rtp? Where can i find documentations for this? > > Comments and suggestions are welcomed (a sample config too :-))) >If you need to make RTP traffic priority higher then signaling or other data, you can use different values of "CoS" field. This setting available in 1.6 version for Linux. Also if you RTP going directly to host you may no need extra settings. -- Best regards, Igor A. Goncharovsky
"Coco Richard" <richard.kingcoco at gmail.com> writes:> Hi all, > > How can i use different VLANs for signaling and audio, e.g vlan 100 for > sip and vlan 200 for rtp? Where can i find documentations for this?That would be very difficult. You can do it in Linux with firewall rules and policy routing based on firewall marks, but the phones probably wouldn't like it much. /Benny