I am running Asterisk the appliance with GXP2000 telephones. For some reason I cannot get the telephones to update their time automatically. Steps I have taken to solve problem: - Configured static IP address and DNS - Change NTP server twice. First time to Asterisk server and the second time to another NTP server. Computers in the same network are able to access the internet. The telephones should be able to access the internet too. So far no luck, any ideas? Fidel Garcia System Engineer sysTeam. 7205 NW 19th Street, Suite 302 Miami, Florida 33126 Email: fgarcia at systeamusa.com Tel: (305)-477-7303 Fax: (305)-477-0013 http://www.systeamusa.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080627/e4bcd683/attachment.htm
I use the GXP 2000 and have had no issues with them keeping the correct time. I run my own NTP server and point the phones to that source. As I stated, this is working very well for us. A couple of simple things that I would suggest you check: 1) On the Basic tab make sure that you are setting the phone to the correct time zone. 2) On the Basic tab set the "Allow DHCP Option 2 to override Time Zone setting:" to No unless you are specifically using this with your DHCP server. 3) Verify that the Daylight Savings Time is set appropriately for your location on the basic tab. 4) On the Advance tab set the "Allow DHCP Option 42 to override NTP server:" to No. I hope this helps you out. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080627/0eace55a/attachment-0001.htm