asterisk users - Jun 2008 - asterisk seg fault

I am running asterisk from svn check out from yesterday Jun 24.
I started with 1.4.20, then 1.4.21 then svn.

I am getting:
pcm_local.h:389 snd_pcm_channel_area_addr assertion bitsofs %8 = 0 failed
segment fault.

I am running debian i386, on a 486 sx machine.
I am connecting to the Console/DSP and then I get the seg fault.
Only thing in asterisk I changed from the default was turning off 
codec_lpc10.
Which I am not using anyway.

What should I do with this error?

Jerry

I managed to catch the whole trace from the seg fault. What is my next step?

Program received signal SIGABRT, Aborted.
[Switching to Thread -1224033360 (LWP 2440)]
0xb7d77947 in raise () from /lib/tls/libc.so.6
(gdb) where
#0  0xb7d77947 in raise () from /lib/tls/libc.so.6
#1  0xb7d790c9 in abort () from /lib/tls/libc.so.6
#2  0xb7d7105f in __assert_fail () from /lib/tls/libc.so.6
#3  0xb741861f in snd_pcm_area_copy (dst_area=0x81cc62c, dst_offset=0, 
    src_area=0x81cb7ec, src_offset=5223, samples=816, 
    format=SND_PCM_FORMAT_S16_LE) at pcm_local.h:499
#4  0xb744b7b7 in snd_pcm_dsnoop_sync_ptr (pcm=0x81cb930) at pcm_dsnoop.c:77
#5  0xb7410b11 in snd_pcm_hwsync (pcm=0x81cb930) at pcm.c:932
#6  0xb7422b55 in snd1_pcm_generic_hwsync (pcm=0x81cc1c8) at pcm_generic.c:143
#7  0xb7410b11 in snd_pcm_hwsync (pcm=0x81cc1c8) at pcm.c:932
#8  0xb742fb4d in snd_pcm_rate_hwsync (pcm=0x81cc3f8) at pcm_rate.c:624
#9  0xb7410b11 in snd_pcm_hwsync (pcm=0x81cc3f8) at pcm.c:932
#10 0xb7417817 in snd1_pcm_read_areas (pcm=0x81cc3f8, areas=0xb70a5b70, 
    offset=0, size=160, func=0xb7421e10 <snd_pcm_mmap_read_areas>)
    at pcm.c:6376
#11 0xb742111f in snd_pcm_mmap_readi (pcm=0x81cc3f8, buffer=0xb74a5a40, 
    size=160) at pcm_mmap.c:236
#12 0xb740fff4 in snd_pcm_readi (pcm=0x81cc038, buffer=0xb74a5a40, size=2440)
    at pcm_local.h:521
#13 0xb749579b in alsa_read (chan=0x8213f18) at chan_alsa.c:683
#14 0x080855b1 in __ast_read (chan=0x8213f18, dropaudio=0) at channel.c:2100
#15 0x08087725 in ast_channel_bridge (c0=0x8212858, c1=0x817cf68, 
    config=0xb70a6eac, fo=0xb70a5fe8, rc=0xb70a5fe4) at channel.c:2380
#16 0xb7c75592 in ast_bridge_call (chan=0x8212858, peer=0x8213f18, 
    config=0xb70a6eac) at res_features.c:1490
#17 0xb75c38fd in dial_exec_full (chan=0x8212858, data=0xb70a8fd8, 
    peerflags=0xb70a6f84, continue_exec=0x0) at app_dial.c:1773
#18 0xb75c519d in dial_exec (chan=0x8212858, data=0xb70a8fd8)
    at app_dial.c:1827
#19 0x080c6e3f in pbx_extension_helper (c=0x8212858, con=0x0, 
    context=0x82129d8 "smvoice-mediaport-firepanel", exten=0x8212a28
"s",
    priority=3, label=0x0, callerid=0x8215450 "404", action=E_SPAWN)
    at pbx.c:537
#20 0x080c9185 in __ast_pbx_run (c=0x8212858) at pbx.c:2317
#21 0x080c9ebe in pbx_thread (data=0x8212858) at pbx.c:2636
#22 0x080f51d2 in dummy_start (data=0x8213178) at utils.c:909
#23 0xb7eff0bd in start_thread () from /lib/tls/libpthread.so.0
#24 0xb7e1b01e in clone () from /lib/tls/libc.so.6
(gdb) quit

On Wednesday 25 June 2008 07:42:21 Jerry Geis wrote:
> I am running asterisk from svn check out from yesterday Jun 24.
> I started with 1.4.20, then 1.4.21 then svn.
>
> I am getting:
> pcm_local.h:389 snd_pcm_channel_area_addr assertion bitsofs %8 = 0 failed
> segment fault.
>
> I am running debian i386, on a 486 sx machine.
> I am connecting to the Console/DSP and then I get the seg fault.
> Only thing in asterisk I changed from the default was turning off
> codec_lpc10.
> Which I am not using anyway.
>
> What should I do with this error?
That error is not from Asterisk code, but from libalsa.  You'll need to
query
that project as to how to proceed.

-- 
Tilghman

Hi,

Am Mittwoch, den 25.06.2008, 08:42 -0400 schrieb Jerry
Geis:
> I am running asterisk from svn check out from yesterday Jun 24.
> I started with 1.4.20, then 1.4.21 then svn.
> 
> I am getting:
> pcm_local.h:389 snd_pcm_channel_area_addr assertion bitsofs %8 = 0 failed
> segment fault.
> 
> I am running debian i386, on a 486 sx machine.
> I am connecting to the Console/DSP and then I get the seg fault.
> Only thing in asterisk I changed from the default was turning off 
> codec_lpc10.
> Which I am not using anyway.
> 
> What should I do with this error?
If You are realy using a 486sx, please remember, that this CPU does not
have a math copro. Maybe that's the cause for the failure. Do You have
the Math-Emulation in kernel options activated? Other reasons can be
some optimisations this processor doesn't support. As Tilghman wrote,
the error does not occur in asterisk. According to Your second posting,
I would suspect the alsa-stuff.

HTH,

Karsten