Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21 The update seems to work ok, when asterisk is started all is fine. However after some time it is not possible to call anymore, my Snom display simply shows Not available and incoming calls from the PRI fail, like the PRI is not connected. Reverting back to 1.4.20.1 solves the problem. I tried re-installing and re-compiling 1.4.21 and all the modules several times, didn't help. Anyone else seeing this?
Hi Remco, On Fri, 2008-06-20 at 09:33 +0200, Remco Barendse wrote:> Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21I did the same yesterday.> The update seems to work ok, when asterisk is started all is fine.Yup.> However after some time it is not possible to call anymore, my Snom > display simply shows Not available and incoming calls from the PRI fail, > like the PRI is not connected.That's not good at all.> Reverting back to 1.4.20.1 solves the problem. > > I tried re-installing and re-compiling 1.4.21 and all the modules several > times, didn't help. > > Anyone else seeing this?Nope but on this 1.4.21 box I am using an Eicon Diva Server card and that has always worked rock solid. Make sure you start Asterisk with -g so it can dump core, set appropriate values for ulimit and log everything (logger.conf). Maybe you will then get more info what's going on. Good luck! Regards, Patrick
Remco Barendse pisze:> However after some time it is not possible to call anymore, my Snom > display simply shows Not available and incoming calls from the PRI fail, > like the PRI is not connected. > > Reverting back to 1.4.20.1 solves the problem. > > I tried re-installing and re-compiling 1.4.21 and all the modules several > times, didn't help. > > Anyone else seeing this? >I have same problem. I'm just downgrading to 1.4.20.1
On Friday 20 June 2008 02:33:04 Remco Barendse wrote:> Ip upgraded yesterday from Asterisk 1.4.20.1 to 1.4.21 > > The update seems to work ok, when asterisk is started all is fine. > > However after some time it is not possible to call anymore, my Snom > display simply shows Not available and incoming calls from the PRI fail, > like the PRI is not connected. > > Reverting back to 1.4.20.1 solves the problem. > > I tried re-installing and re-compiling 1.4.21 and all the modules several > times, didn't help. > > Anyone else seeing this?If you could recompile with DONT_OPTIMIZE and DEBUG_THREADS enabled in the compiler flags (in 'make menuselect') and obtain a 'core show locks' when this occurs, then upload the resulting output to an issue on bugs.digium.com, that would help a great deal in tracking down where exactly the problem lies. -- Tilghman