asterisk users - Jun 2008 - Using Asterisk Only as Voice Recording Solution.

On Thu, Jun 12, 2008 at 11:16 AM, Syed Nasruddin <nasruddin at
ncel.com.pk> wrote:
>
>
> HI,
>
>
>
> I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
> command over Asterisk up till now and have run it in different scenarios
> such as Call Center Solution, PBX solution.
>
>
>
> There is a requirement to use Asterisk only as Voice Recording solution in
> following manner:
>
>
>
> Physical POT lines before entering into our native PBX will be splitted and
> one of each of those lines will also enter into our Asterisk System.
> Once the call is routed by our native PBX and recipient picks up the phone
> (either SIP phone or Analog Phone) I should be able to start recording the
> call.
> When the call ends, the recording should stop.
>
>
>
> Problem being faced by me is this that I am able to catch the call in my
> diaplan and initialize MixMonitor but since my diaplan never detects
> OFF-HOOK/ON_HOOK condition it continue to wait and finally hang-up while in
> actual the call is running through our PBX.
>
>
>
> Is there any channel variable or any other mechanism by which I can
> accomplish this task? Since i will not be using any Dial() or similar
> application I will be needing some kind of OFF-HOOK trigger/Event in my
> dialplan.
>
>
>
> Your help will be highly appreciated.
>
>
>
> regards
>
>
>
> Syed Nasruddin
>
It may not be possible to do this in parallel the way you are trying
now.  In series should be a simple task.

Just pass the call through Asterisk as the man in the middle, the
dialplan will be very simple.

Thanks,
Steve T

HI,

 

I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
command over Asterisk up till now and have run it in different scenarios
such as Call Center Solution, PBX solution.

 

There is a requirement to use Asterisk only as Voice Recording solution
in following manner:

 

1.	Physical POT lines before entering into our native PBX will be
splitted and one of each of those lines will also enter into our
Asterisk System. 
2.	Once the call is routed by our native PBX and recipient picks up
the phone (either SIP phone or Analog Phone) I should be able to start
recording the call. 
3.	When the call ends, the recording should stop. 

 

Problem being faced by me is this that I am able to catch the call in my
diaplan and initialize MixMonitor but since my diaplan never detects
OFF-HOOK/ON_HOOK condition it continue to wait and finally hang-up while
in actual the call is running through our PBX.

 

Is there any channel variable or any other mechanism by which I can
accomplish this task? Since i will not be using any Dial() or similar
application I will be needing some kind of OFF-HOOK trigger/Event in my
dialplan.

 

Your help will be highly appreciated.

 

regards

 

Syed Nasruddin

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080612/ad783247/attachment.htm

2008/6/12 Syed Nasruddin <nasruddin at
ncel.com.pk>:
>
>
> HI,
>
>
>
> I am using TDM800P Digium Card with Asterisk 1.4.* version. I have fair
> command over Asterisk up till now and have run it in different scenarios
> such as Call Center Solution, PBX solution.
>
>
>
> There is a requirement to use Asterisk only as Voice Recording solution in
> following manner:
>
>
>
> Physical POT lines before entering into our native PBX will be splitted and
> one of each of those lines will also enter into our Asterisk System.
> Once the call is routed by our native PBX and recipient picks up the phone
> (either SIP phone or Analog Phone) I should be able to start recording the
> call.
> When the call ends, the recording should stop.
Our clients use this for E1 Pri: http://www.voicetronix.com/logger.htm

Not sure if there is a analogue solution.

-- 
http://www.suretecsystems.com/services/openldap/

Thanks for the link. I think I will be using this product.


Syed Nasruddin 


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gavin
Henry
Sent: Saturday, June 14, 2008 1:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Using Asterisk Only as Voice
RecordingSolution.

2008/6/12 Syed Nasruddin <nasruddin at
ncel.com.pk>:
>
>
> HI,
>
>
>
> I am using TDM800P Digium Card with Asterisk 1.4.* version. I have
fair
> command over Asterisk up till now and have run it in different
scenarios
> such as Call Center Solution, PBX solution.
>
>
>
> There is a requirement to use Asterisk only as Voice Recording
solution in
> following manner:
>
>
>
> Physical POT lines before entering into our native PBX will be
splitted and
> one of each of those lines will also enter into our Asterisk System.
> Once the call is routed by our native PBX and recipient picks up the
phone
> (either SIP phone or Analog Phone) I should be able to start recording
the
> call.
> When the call ends, the recording should stop.
Our clients use this for E1 Pri: http://www.voicetronix.com/logger.htm

Not sure if there is a analogue solution.

-- 
http://www.suretecsystems.com/services/openldap/

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users