Hi;
I would like just to know one thing:
Where did u find a good IAX IP Phone?
I am looking in the market since long time to buy such
device and did not find a reliable one till now.
Any advise?
Regards
Bilal
---------------------------> Hi,
>
> I've been asked to spec up a small Asterisk system,
which needs
to:> - Connect to ISDN2e (I'm thinking of using a B100P
card here)> - Connect to the POTS (A400P with 1 FXO)
> - Allow remote phones (thinking of an ETC 6050
utilising IAX2)>
> It is a requirement that the POTS analogue card
picks up CLI
information -> and I'm in the UK which, historically, has lousy CLI
support....
certainly,> my AX100P doesn't do it... does anyone have any good
news about
the
A400P,> or do I need to be hunting down a genuine Digium
card?>
> I'm further assuming that an IAX2 phone will work
far more
reliably
through> firewalls & non-static IP addresses (Asterisk box
will be on a
static
IP,> remote/roaming "office" may not be) than a SIP
phone, based on my> experiences of getting IAX2 between Asterisks to
work.>
> So -- am I on the right lines with the hardware I've
specced
above,
or> should I be looking at alternatives?
Can't you leave the picking up of the cli to the isdn
line?
Even if it is an ISDN1 (just a B-channel and a
D-channel), the chances
of tranferring channel info, like CLI, is better.
I would leave the pots-interfaces for the people stuck
with an ordinary
phone (or fax)..
Did you consider sipura 3102? Easier to scale than
analogue cards.
And perhaps easier to deploy, no spof,..
hw