Hi all, i dont have any experience in configuring any hardware cards with asterisk, i used SIP only untill now. So here i am to ask you guys what do i need to install a tdm410 card on my machine. I have read the installation guide i found on the digium website but it only talks about the installation of libpri, zaptel and asterisk. If i do that only, will my machine detect the card automatically? if not then what? -- Best Regards Rizwan Hisham -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080526/20d9dd51/attachment.htm
On May 26, 2008, at 7:00 AM, Rizwan Hisham wrote:> i dont have any experience in configuring any hardware cards with > asterisk, i used SIP only untill now. So here i am to ask you guys > what do i need to install a tdm410 card on my machine. I have read > the installation guide i found on the digium website but it only > talks about the installation of libpri, zaptel and asterisk. If i do > that only, will my machine detect the card automatically? if not > then what?Digium provides free support to help you get your hardware installed. I would encourage you to call them, or to email them - support at digium.com . -- Russell Bryant Senior Software Engineer Open Source Team Lead Digium, Inc.
> On May 26, 2008, at 7:00 AM, Rizwan Hisham wrote: >> talks about the installation of libpri, zaptel and asterisk. If i do >> that only, will my machine detect the card automatically? if not >> then what?Hi Rizwan, This zaptel starter info is old, but I believe it will help you: http://tfot.leifmadsen.com/ch03s10s02.html There are many variations of this document on line which eventually became The Book, aka "Asterisk TFOT" . You can also go wake a few people up over at the #asterisk IRC channel on freenode.net and get some help with your questions.